Precipitation minus actual evapotranspiration (Awash, Ethiopia - Monthly - 100m)

The evapotranspiration from precipitation (ETRAIN) is the portion of the actual evapotranspiration and Interception (ETIa) that is satified from precipitation. It is computed from precipitation, actual evapotranspiration and soil moisture and calculated by spliting ETIa to rainfall and incremental ET using pixel based Soil Moisture Water Balance Model. **Data publication:** 2020-01-01 **Supplemental Information:** No data value: -9999 Unit: mm Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. This implies that other temporal aggregations (monthly, seasonal, annual), and layers that depend on those, are updated as well. Practically this means that a final annual aggregation of the most recent full calendar year can only be produced after the end of February. Likewise, the final monthly aggregation of the most recent calendar months can only be produced 2 full months later. **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [Solomon Seyoum](mailto:s.seyoum@un-ihe.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

The incremental evapotranspiration is part of the actual evapotranspiration and Interception (ETIa) that is not satified from precipitation but from supply or runoff from other cells or from groundwater. It is calculated by spliting ETIa to rainfall and incremental ET using pixel based soil moisture water balance model. **Data publication:** 2020-01-01 **Supplemental Information:** No data value: -9999 Unit: mm Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. This implies that other temporal aggregations (monthly, seasonal, annual), and layers that depend on those, are updated as well. Practically this means that a final annual aggregation of the most recent full calendar year can only be produced after the end of February. Likewise, the final monthly aggregation of the most recent calendar months can only be produced 2 full months later. **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [Solomon Seyoum](mailto:s.seyoum@un-ihe.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

Precipitation minus actual evapotranspiration (P-ET) calculated over the Nile River Basin. The P-ET is the difference between WaPOR precipitation (based on CHIRPS) and the actual evapotranspiration and interception. **Data publication:** 2020-06-01 **Supplemental Information:** No data value: -9999 Unit: mm **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [Solomon Seyoum](mailto:s.seyoum@un-ihe.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

Precipitation minus actual evapotranspiration (P-ET) calculated over the Jordan River Basin area. The P-ET is the difference between WaPOR precipitation (based on CHIRPS) and the actual evapotranspiration and interception. **Data publication:** 2020-06-01 **Supplemental Information:** No data value: -9999 Unit: mm Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. This implies that other temporal aggregations (monthly, seasonal, annual), and layers that depend on those, are updated as well. Practically this means that a final annual aggregation of the most recent full calendar year can only be produced after the end of February. Likewise, the final monthly aggregation of the most recent calendar months can only be produced 2 full months later. **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [Solomon Seyoum](mailto:s.seyoum@un-ihe.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

The actual Evapotranspiration and Interception (ETIa) is the sum of the soil evaporation (E), canopy transpiration (T), and evaporation from rainfall intercepted by leaves (I). The value of each pixel represents the ETIa in a given month. The data is provided in near real time from January 2009 to 2023. **Data publication:** 2020-01-01 **Supplemental Information:** No data value: -9999 Unit: mm Scale Factor : 0.1 Map code : L3-AETI-M.AWA Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. This implies that other temporal aggregations (monthly, seasonal, annual), and layers that depend on those, are updated as well. Practically this means that a final annual aggregation of the most recent full calendar year can only be produced after the end of February. Likewise, the final monthly aggregation of the most recent calendar months can only be produced 2 full months later. **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [WaPOR](mailto:wapor@fao.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** See ETIa by dekad for further information. The monthly total is obtained by taking the ETIa in mm/day, multiplying by the number of days in a dekad, and summing the dekads of each month. **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

The actual Evapotranspiration and Interception (ETIa) is the sum of the soil evaporation (E), canopy transpiration (T), and evaporation from rainfall intercepted by leaves (I). The value of each pixel represents the ETIa in a given year. The data is provided from January 2009 to 2023. **Data publication:** 2020-01-01 **Supplemental Information:** No data value: -9999 Unit: mm Scale Factor : 0.1 Map code : L3-AETI-A.AWA Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. This implies that other temporal aggregations (monthly, seasonal, annual), and layers that depend on those, are updated as well. Practically this means that a final annual aggregation of the most recent full calendar year can only be produced after the end of February. Likewise, the final monthly aggregation of the most recent calendar months can only be produced 2 full months later. **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [WaPOR](mailto:wapor@fao.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** See ETIa by dekad for further information. The annual total is obtained by taking the ETIa in mm/day, multiplying by the number of days in a dekad, and summing the dekads of each year. **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage