ECOSTRESS Gridded Cloud Mask Instantaneous L2 Global 70 m V002

The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) mission measures the temperature of plants to better understand how much water plants need and how they respond to stress. ECOSTRESS is attached to the International Space Station (ISS) and collects data globally between 52° N and 52° S latitudes. The ECOSTRESS Swath Cloud Mask Instantaneous L2 Global 70 m (ECO_L2_CLOUD) Version 2 data product is derived using a single-channel Bayesian cloud threshold with a look-up-table (LUT) approach. The ECOSTRESS Level 2 cloud product provides a cloud mask that can be used to determine cloud cover for accurate land surface temperature and evapotranspiration estimation. The corresponding ECO_L1B_GEO data product is required to georeference the ECO_L2_CLOUD data product. The ECO_L2_CLOUD Version 2 data product contains two cloud mask layers: Brightness temperature LUT test and Final cloud mask. Information on how to interpret the bit fields in the cloud mask is provided in Table 7 of the User Guide. Known Issues * Data acquisition gap: ECOSTRESS was launched on June 29, 2018, and moved to autonomous science operations on August 20, 2018, following a successful in-orbit checkout period. On September 29, 2018, ECOSTRESS experienced an anomaly with its primary mass storage unit (MSU). ECOSTRESS has a primary and secondary MSU (A and B). On December 5, 2018, the instrument was switched to the secondary MSU and science operations resumed. On March 14, 2019, the secondary MSU experienced a similar anomaly, temporarily halting science acquisitions. On May 15, 2019, a new data acquisition approach was implemented, and science acquisitions resumed. To optimize the new acquisition approach TIR bands 2, 4 and 5 are being downloaded. The data products are as previously, except the bands not downloaded contain fill values (L1 radiance and L2 emissivity). This approach was implemented from May 15, 2019, through April 28, 2023. * Data acquisition gap: From February 8 to February 16, 2020, an ECOSTRESS instrument issue resulted in a data anomaly that created striping in band 4 (10.5 micron). These data products have been reprocessed and are available for download. No ECOSTRESS data were acquired on February 17, 2020, due to the instrument being in SAFEHOLD. Data acquired following the anomaly have not been affected. * Data acquisition: ECOSTRESS has now successfully returned to 5-band mode after being in 3-band mode since 2019. This feature was successfully enabled following a Data Processing Unit firmware update (version 4.1) to the payload on April 28, 2023. To better balance contiguous science data scene variables, 3-band collection is currently being interleaved with 5-band acquisitions over the orbital day/night periods. * Solar Array Obstruction: Some ECOSTRESS scenes may be affected by solar array obstructions from the International Space Station (ISS), potentially impacting data quality of obstructed pixels. The 'FieldOfViewObstruction' metadata field is included in all Version 2 products to indicate possible obstructions: * Before October 24, 2024 (orbits prior to 35724): The field is present but was not populated and does not reliably identify affected scenes. * On or after October 24, 2024 (starting with orbit 35724): The field is populated and generally accurate, except for late December 2024, when a temporary processing error may have caused false positives. * A list of scenes confirmed to be affected by obstructions is available and is recommended for verifying historical data (before October 24, 2024) and scenes from late December 2024. * The ISS native pointing information is coarse relative to ECOSTRESS pixels, so ECOSTRESS geolocation is improved through image matching with a basemap. Metadata in the L1B_GEO file shows the success of this geolocation improvement, using categorizations "best", "good", "suspect", and "poor". We recommend that users use only "best" and "good" scenes for evaluations where geolocation is important (e.g., comparison to field sites). For some scenes, this metadata is not reflected in the higher-level products (e.g., land surface temperature, evapotranspiration, etc.). While this metadata is always available in the geolocation product, to save users additional download, we have produced a summary text file that includes the geolocation quality flags for all scenes from launch to present. At a later date, all higher-level products will reflect the geolocation quality flag correctly (the field name is GeolocationAccuracyQA). *During the time period of May 15th, 2025, through July 1st, 2025, ECOSTRESS data was noisier than expected. Cycling the payload resolved the issue, but researchers should use all levels of ECOSTRESS data acquired during this time period with caution.

The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) mission measures the temperature of plants to better understand how much water plants need and how they respond to stress. ECOSTRESS is attached to the International Space Station (ISS) and collects data globally between 52° N and 52° S latitudes. The ECOSTRESS Gridded Cloud Mask Instantaneous Level 2 Global 70 m (ECO_L2G_CLOUD) Version 3 data product is derived using an improved single-channel Bayesian cloud thresholding look-up-table (LUT) approach with higher resolution atmospheric inputs. The ECO_L2G_CLOUD product provides cloud confidence and final cloud mask variables that can be used to determine cloud cover for accurate land surface temperature and evapotranspiration estimation. This data product is projected to a globally snapped 0.0006° grid with a spatial resolution of 70 meters (m). The ECO_L2G_CLOUD Version 3 data product contains two cloud mask variables: Cloud_confidence and Cloud_final. Information on how to interpret the cloud confidence and cloud mask variables is provided in the ECOSTRESS L2 Cloud Product User Guide. Known Issues * Solar Array Obstruction: Some ECOSTRESS scenes may be affected by solar array obstructions from the ISS, potentially impacting data quality in obstructed pixels. The 'FieldOfViewObstruction' metadata field is reliably populated and accurate for all products generated on or after October 2024, following fixes to the PGE docker configuration and updates to the L1A_RAW_PIX software. Prior to October 2024, the field was not reliably populated; a list of confirmed affected scenes was maintained and is recommended for verifying historical data. * Historical acquisition gaps and anomalies (2018–2023): Irrecoverable data loss occurred due to Mass Storage Unit (MSU) failures, resulting in permanent gaps in the observational record where no ECOSTRESS data was acquired. Other early issues, including band 4 striping (Feb 2020), 3-band TES mode limitations (May 2019–April 2023), and noisy data periods (e.g., May–July 2025), have been mitigated through reprocessing, firmware updates, and instrument recovery. Version 3 products incorporate these improvements where data exists and are unaffected by ongoing issues, but the permanent historical gaps remain, and caution is advised for time-series analyses spanning affected periods. * Product formats: Version 3 discontinues swath-based (non-gridded) HDF5 products for Level 2 land surface temprature and emissivity (LST&E) and Cloud outputs. Only gridded (ECO_L2G_LSTE and ECO_L2G_CLOUD in HDF5) and tiled (ECO_L2T_LSTE in Cloud-Optimized GeoTIFF) formats are available for Level 2 products. Swath-based products remain available for Level 1 products (e.g., ECO_L1B_RAD, ECO_L1B_GEO). Version 3 discontinues HDF5 products for Level 2 STARS, Level 3 Evapotranspiration, and Level 4 Evaporative Stress Index, and Water Use Efficiency outputs. Only tiled (Cloud-Optimized GeoTIFF) formats remain available for these products. Users transitioning from Version 2 should verify compatibility with the new structures. * Geolocation considerations: While geolocation is improved in Collection 3 tiled products (fixed Military Grid Reference System (MGRS) grid), gridded products may reference legacy "GeolocationAccuracyQA" flags. Use "best" and "good" scenes for applications sensitive to precise positioning.

The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) mission measures the temperature of plants to better understand how much water plants need and how they respond to stress. ECOSTRESS is attached to the International Space Station (ISS) and collects data globally between 52° N and 52° S latitudes. The ECOSTRESS Gridded Land Surface Temperature and Emissivity Instantaneous Level 2 Global 70 m (ECO_L2G_LSTE) Version 2 data product provides atmospherically corrected land surface temperature and emissivity (LST&E) values derived from five thermal infrared (TIR) bands. The ECO_L2G_LSTE data product was derived using a physics-based Temperature and Emissivity Separation (TES) algorithm. This data product is a gridded version of the ECO_L2_LSTE Version 2 data product that was resampled using nearest neighbor, projected to a globally snapped 0.0006° grid, and repackaged as the ECO_L2G_LSTE data product. The ECO_L2G_LSTE product has a spatial resolution of 70 meters (m). The ECO_L2G_LSTE Version 2 data product contains 8 layers distributed in an HDF5 format file including LST, LST error, wideband emissivity, height, view zenith angle, quality flags, and cloud and water masks. Known Issues * Data acquisition gap: ECOSTRESS was launched on June 29, 2018, and moved to autonomous science operations on August 20, 2018, following a successful in-orbit checkout period. On September 29, 2018, ECOSTRESS experienced an anomaly with its primary mass storage unit (MSU). ECOSTRESS has a primary and secondary MSU (A and B). On December 5, 2018, the instrument was switched to the secondary MSU and science operations resumed. On March 14, 2019, the secondary MSU experienced a similar anomaly, temporarily halting science acquisitions. On May 15, 2019, a new data acquisition approach was implemented, and science acquisitions resumed. To optimize the new acquisition approach TIR bands 2, 4, and 5 are being downloaded. The data products are as previously, except the bands not downloaded contain fill values (L1 radiance and L2 emissivity). This approach was implemented from May 15, 2019, through April 28, 2023. * Data acquisition gap: From February 8 to February 16, 2020, an ECOSTRESS instrument issue resulted in a data anomaly that created striping in band 4 (10.5 micron). These data products have been reprocessed and are available for download. No ECOSTRESS data were acquired on February 17, 2020, due to the instrument being in SAFEHOLD. Data acquired following the anomaly have not been affected. * Data acquisition: ECOSTRESS has now successfully returned to 5-band mode after being in 3-band mode since 2019. This feature was successfully enabled following a Data Processing Unit firmware update (version 4.1) to the payload on April 28, 2023. To better balance contiguous science data scene variables, 3-band collection is currently being interleaved with 5-band acquisitions over the orbital day/night periods. * Data alert: All users of ECOSTRESS L2 v002 products (ECO_L2T_LSTE, ECO_L2_LSTE, ECO_L2G_LSTE) should be aware that the cloud mask information previously available in the Quality Control (QC) layer in v001, is not available in the v002 QC layer. Instead, users should be using the 'cloud_mask' layer in the L2 LSTE product, or the cloud information in the standard cloud mask products (ECO_L2_CLOUD, ECO_L2T_CLOUD, ECO_L2G_CLOUD) to assess if a pixel is clear or cloudy (see section 3 of the User Guide). In v002 the mandatory QA flags in the QC bit mask provide the following information in bits 1 and 0: * 00 - Pixel produced by TES * 01 - Pixel produced by TES but certain conditions are met that may degrade the LSTE accuracy (see User Guide for details) * 10 - Not set (previously set to cloud mask in v001) * 11 - Pixel not produced (see bits 3 & 2 for additional information) * Solar Array Obstruction: Some ECOSTRESS scenes may be affected by solar array obstructions from the International Space Station (ISS), potentially impacting data quality of obstructed pixels. The 'FieldOfViewObstruction' metadata field is included in all Version 2 products to indicate possible obstructions: * Before October 24, 2024 (orbits prior to 35724): The field is present but was not populated and does not reliably identify affected scenes. * On or after October 24, 2024 (starting with orbit 35724): The field is populated and generally accurate, except for late December 2024, when a temporary processing error may have caused false positives. * A list of scenes confirmed to be affected by obstructions is available and is recommended for verifying historical data (before October 24, 2024) and scenes from late December 2024. * The ISS native pointing information is coarse relative to ECOSTRESS pixels, so ECOSTRESS geolocation is improved through image matching with a basemap. Metadata in the L1B_GEO file shows the success of this geolocation improvement, using categorizations "best", "good", "suspect", and "poor". We recommend that users use only "best" and "good" scenes for evaluations where geolocation is important (e.g., comparison to field sites). For some scenes, this metadata is not reflected in the higher-level products (e.g., land surface temperature, evapotranspiration, etc.). While this metadata is always available in the geolocation product, to save users additional download, we have produced a summary text file that includes the geolocation quality flags for all scenes from launch to present. At a later date, all higher-level products will reflect the geolocation quality flag correctly (the field name is GeolocationAccuracyQA). *During the time period of May 15th, 2025, through July 1st, 2025, ECOSTRESS data was noisier than expected. Cycling the payload resolved the issue, but researchers should use all levels of ECOSTRESS data acquired during this time period with caution.

The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) mission measures the temperature of plants to better understand how much water plants need and how they respond to stress. ECOSTRESS is attached to the International Space Station (ISS) and collects data globally between 52° N and 52° S latitudes. The ECOSTRESS Tiled Land Surface Temperature and Emissivity Instantaneous Level 2 Global 70 m (ECO_L2T_LSTE) Version 2 data product provides atmospherically corrected land surface temperature and emissivity (LST&E) values derived from five thermal infrared (TIR) bands. The ECO_L2T_LSTE data product was derived using a physics-based Temperature and Emissivity Separation (TES) algorithm. This tiled data product is subset from the ECO_L2G_LSTE data product using a modified version of the Military Grid Reference System (MGRS) which divides Universal Transverse Mercator (UTM) zones into square tiles that are 109.8 km by 109.8 km with a 70 meter (m) spatial resolution. The ECO_L2T_LSTE Version 2 data product is provided in Cloud Optimized GeoTIFF (COG) format, and each band is distributed as a separate COG. This product contains seven layers including LST, LST error, wideband emissivity, quality flags, height, and cloud and water masks. Known Issues * Data acquisition gap: ECOSTRESS was launched on June 29, 2018, and moved to autonomous science operations on August 20, 2018, following a successful in-orbit checkout period. On September 29, 2018, ECOSTRESS experienced an anomaly with its primary mass storage unit (MSU). ECOSTRESS has a primary and secondary MSU (A and B). On December 5, 2018, the instrument was switched to the secondary MSU and science operations resumed. On March 14, 2019, the secondary MSU experienced a similar anomaly, temporarily halting science acquisitions. On May 15, 2019, a new data acquisition approach was implemented, and science acquisitions resumed. To optimize the new acquisition approach TIR bands 2, 4, and 5 are being downloaded. The data products are as previously, except the bands not downloaded contain fill values (L1 radiance and L2 emissivity). This approach was implemented from May 15, 2019, through April 28, 2023. * Data acquisition gap: From February 8 to February 16, 2020, an ECOSTRESS instrument issue resulted in a data anomaly that created striping in band 4 (10.5 micron). These data products have been reprocessed and are available for download. No ECOSTRESS data were acquired on February 17, 2020, due to the instrument being in SAFEHOLD. Data acquired following the anomaly have not been affected. * Data acquisition: ECOSTRESS has now successfully returned to 5-band mode after being in 3-band mode since 2019. This feature was successfully enabled following a Data Processing Unit firmware update (version 4.1) to the payload on April 28, 2023. To better balance contiguous science data scene variables, 3-band collection is currently being interleaved with 5-band acquisitions over the orbital day/night periods. * Data alert: All users of ECOSTRESS L2 v002 products (ECO_L2T_LSTE, ECO_L2_LSTE, ECO_L2G_LSTE) should be aware that the cloud mask information previously available in the Quality Control (QC) layer in v001, is not available in the v002 QC layer. Instead, users should be using the 'cloud_mask' layer in the L2 LSTE product, or the cloud information in the standard cloud mask products (ECO_L2_CLOUD, ECO_L2T_CLOUD, ECO_L2G_CLOUD) to assess if a pixel is clear or cloudy (see section 3 of the User Guide). In v002 the mandatory QA flags in the QC bit mask provide the following information in bits 1 and 0: * 00 - Pixel produced by TES * 01 - Pixel produced by TES but certain conditions are met that may degrade the LSTE accuracy (see User Guide for details) * 10 - Not set (previously set to cloud mask in v001) * 11 - Pixel not produced (see bits 3 & 2 for additional information) * Solar Array Obstruction: Some ECOSTRESS scenes may be affected by solar array obstructions from the International Space Station (ISS), potentially impacting data quality of obstructed pixels. The 'FieldOfViewObstruction' metadata field is included in all Version 2 products to indicate possible obstructions: * Before October 24, 2024 (orbits prior to 35724): The field is present but was not populated and does not reliably identify affected scenes. * On or after October 24, 2024 (starting with orbit 35724): The field is populated and generally accurate, except for late December 2024, when a temporary processing error may have caused false positives. * A list of scenes confirmed to be affected by obstructions is available and is recommended for verifying historical data (before October 24, 2024) and scenes from late December 2024. * Geolocation flags: The ISS native pointing information is coarse relative to ECOSTRESS pixels, so ECOSTRESS geolocation is improved through image matching with a basemap. Metadata in the L1B_GEO file shows the success of this geolocation improvement, using categorizations "best", "good", "suspect", and "poor". We recommend that users use only "best" and "good" scenes for evaluations where geolocation is important (e.g., comparison to field sites). For some scenes, this metadata is not reflected in the higher-level products (e.g., land surface temperature, evapotranspiration, etc.). While this metadata is always available in the geolocation product, to save users additional download, we have produced a summary text file that includes the geolocation quality flags for all scenes from launch to present. At a later date, all higher-level products will reflect the geolocation quality flag correctly (the field name is GeolocationAccuracyQA). * Instrument noise: During the time period of May 15, 2025, through July 1, 2025 ECOSTRESS data was noisier than expected. Cycling the payload resolved the issue, but researchers should use all levels of ECOSTRESS data acquired during this time period with caution. * Missing variable: ECO_L2T_LSTE was generated without the lst_err layer/variable during the time period from December 16, 2025, to June 10, 2026. The impacted data will be reprocessed in the near future.

The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) mission measures the temperature of plants to better understand how much water plants need and how they respond to stress. ECOSTRESS is attached to the International Space Station (ISS) and collects data globally between 52° N and 52° S latitudes. The ECOSTRESS Gridded Downscaled Soil Moisture Instantaneous L3 Global 70 m (ECO_L3G_SM) Version 2 data product provides instantaneous soil moisture (SM) estimates downscaled using linear regression. The linear regression uses up-sampled surface temperature (ST), normalized difference vegetation index (NDVI), and albedo as predictor variables and SM from Goddard Earth Observing System Version 5 (GEOS-5) Forward Processing (FP) as response variables for their relative outputs. Once the regression coefficients have been determined, they are applied to the 70 meter (m) ST, NDVI, and albedo as a first pass, which is then bias corrected using a GEOS-5 FP image. This data product is mosaicked from the L3 tiled SM (ECO_L3T_SM) product, is projected to a globally snapped 0.0006° grid, and has a spatial resolution of 70 m. The ECO_L3G_SM Version 2 data product contains three layers distributed in an HDF5 file including SM, cloud mask, and water masks. Known Issues * Data acquisition gap: ECOSTRESS was launched on June 29, 2018, and moved to autonomous science operations on August 20, 2018, following a successful in-orbit checkout period. On September 29, 2018, ECOSTRESS experienced an anomaly with its primary mass storage unit (MSU). ECOSTRESS has a primary and secondary MSU (A and B). On December 5, 2018, the instrument was switched to the secondary MSU, and science operations resumed. On March 14, 2019, the secondary MSU experienced a similar anomaly, temporarily halting science acquisitions. On May 15, 2019, a new data acquisition approach was implemented, and science acquisitions resumed. To optimize the new acquisition approach, only Thermal Infrared (TIR) bands 2, 4, and 5 are being downloaded. The data products are the same as before, but the bands not downloaded contain fill values (L1 radiance and L2 emissivity). This approach was implemented from May 15, 2019, through April 28, 2023. * Data acquisition gap: From February 8 to February 16, 2020, an ECOSTRESS instrument issue resulted in a data anomaly that created striping in band 4 (10.5 micron). These data products have been reprocessed and are available for download. No ECOSTRESS data were acquired on February 17, 2020, due to the instrument being in SAFEHOLD. Data acquired following the anomaly have not been affected. * Data acquisition: ECOSTRESS has now successfully returned to 5-band mode after being in 3-band mode since 2019. This feature was successfully enabled following a Data Processing Unit firmware update (version 4.1) to the payload on April 28, 2023. To better balance contiguous science data scene variables, 3-band collection is currently being interleaved with 5-band acquisitions over the orbital day/night periods. * Missing Cloud Layer Alert: All users of ECOSTRESS Tiled and Gridded L3 Soil Moisture and Surface Energy Balance v002 products (ECO_L3T_SM, ECO_L3G_SM, ECO_L3T_SEB and ECO_L3G_SEB) should be aware that the ‘cloud mask’ layer may be unavailable for a select number of granules for the year 2023. Users are encouraged to get that information from the corresponding Level 2 Standard Cloud Mask products (ECO_L2_CLOUD and ECO_L2G_CLOUD) to assess if a pixel is clear or cloudy (see section 3 of the User Guide). * Solar Array Obstruction: Some ECOSTRESS scenes may be affected by solar array obstructions from the International Space Station (ISS), potentially impacting data quality of obstructed pixels. The 'FieldOfViewObstruction' metadata field is included in all Version 2 products to indicate possible obstructions: * Before October 24, 2024 (orbits prior to 35724): The field is present but was not populated and does not reliably identify affected scenes. * On or after October 24, 2024 (starting with orbit 35724): The field is populated and generally accurate, except for late December 2024, when a temporary processing error may have caused false positives. * A list of scenes confirmed to be affected by obstructions is available and is recommended for verifying historical data (before October 24, 2024) and scenes from late December 2024. * The ISS native pointing information is coarse relative to ECOSTRESS pixels, so ECOSTRESS geolocation is improved through image matching with a basemap. Metadata in the L1B_GEO file shows the success of this geolocation improvement, using categorizations "best", "good", "suspect", and "poor". We recommend that users use only "best" and "good" scenes for evaluations where geolocation is important (e.g., comparison to field sites). For some scenes, this metadata is not reflected in the higher-level products (e.g., land surface temperature, evapotranspiration, etc.). While this metadata is always available in the geolocation product, to save users additional download, we have produced a summary text file that includes the geolocation quality flags for all scenes from launch to present. At a later date, all higher-level products will reflect the geolocation quality flag correctly (the field name is GeolocationAccuracyQA). *During the time period of May 15th, 2025, through July 1st, 2025, ECOSTRESS data was noisier than expected. Cycling the payload resolved the issue, but researchers should use all levels of ECOSTRESS data acquired during this time period with caution. * Coarse Resolution Artifacts: Users may sometimes observe coarse resolution (~500m - 1km) artifacts in the L3 and L4 gridded and tiled products. These artifacts are caused by corresponding artifacts within the ECOSTRESS Tiled Ancillary NDVI and Albedo L2 Global 70 m (ECO_L2T_STARS) Version 2 data product. The ECO_L2T_STARS product is produced through a data fusion of Suomi NPP VIIRS (~500 m - 1 km resolution) and Harmonized Landsat Sentinel-2 (HLS, 30 m) products. When there is significant temporal lag between HLS acquisitions, the VIIRS data dominates, which can produce coarse resolution artifacts in the ECO_L2T_STARS product. This typically corresponds to relatively large uncertainty values.

The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) mission measures the temperature of plants to better understand how much water plants need and how they respond to stress. ECOSTRESS is attached to the International Space Station (ISS) and collects data globally between 52° N and 52° S latitudes. The ECOSTRESS Gridded Evapotranspiration Instantaneous and Daytime L3 Global 70 m (ECO_L3G_JET) Version 2 data product provides instantaneous canopy transpiration, leaf surface evaporation, and soil moisture evaporation using the Priestley-Taylor formula. This data product is mosaicked from the L3 tiled JET (ECO_L3T_JET) product, projected to a globally snapped 0.0006° grid, and has a spatial resolution of 70 meters (m). The ECO_L3G_JET Version 2 data product contains 12 layers distributed in an HDF5 format file including ETdaily, ETinstUncertainty, PTJPLSMinst, STICinst, MOD16inst, BESSinst, STICcanopy, PTJPLSMcanopy, PTJPLSMinterception, PTJPLSMsoil, cloud mask, and water mask. Known Issues * Data acquisition gap: ECOSTRESS was launched on June 29, 2018, and moved to autonomous science operations on August 20, 2018, following a successful in-orbit checkout period. On September 29, 2018, ECOSTRESS experienced an anomaly with its primary mass storage unit (MSU). ECOSTRESS has a primary and secondary MSU (A and B). On December 5, 2018, the instrument was switched to the secondary MSU and science operations resumed. On March 14, 2019, the secondary MSU experienced a similar anomaly, temporarily halting science acquisitions. On May 15, 2019, a new data acquisition approach was implemented, and science acquisitions resumed. To optimize the new acquisition approach TIR bands 2, 4, and 5 are being downloaded. The data products are as previously, except the bands not downloaded contain fill values (L1 radiance and L2 emissivity). This approach was implemented from May 15, 2019, through April 28, 2023. * Data acquisition gap: From February 8 to February 16, 2020, an ECOSTRESS instrument issue resulted in a data anomaly that created striping in band 4 (10.5 micron). These data products have been reprocessed and are available for download. No ECOSTRESS data were acquired on February 17, 2020, due to the instrument being in SAFEHOLD. Data acquired following the anomaly have not been affected. * Data acquisition: ECOSTRESS has now successfully returned to 5-band mode after being in 3-band mode since 2019. This feature was successfully enabled following a Data Processing Unit firmware update (version 4.1) to the payload on April 28, 2023. To better balance contiguous science data scene variables, 3-band collection is currently being interleaved with 5-band acquisitions over the orbital day/night periods. * Solar Array Obstruction: Some ECOSTRESS scenes may be affected by solar array obstructions from the International Space Station (ISS), potentially impacting data quality of obstructed pixels. The 'FieldOfViewObstruction' metadata field is included in all Version 2 products to indicate possible obstructions: * Before October 24, 2024 (orbits prior to 35724): The field is present but was not populated and does not reliably identify affected scenes. * On or after October 24, 2024 (starting with orbit 35724): The field is populated and generally accurate, except for late December 2024, when a temporary processing error may have caused false positives. * A list of scenes confirmed to be affected by obstructions is available and is recommended for verifying historical data (before October 24, 2024) and scenes from late December 2024. * The ISS native pointing information is coarse relative to ECOSTRESS pixels, so ECOSTRESS geolocation is improved through image matching with a basemap. Metadata in the L1B_GEO file shows the success of this geolocation improvement, using categorizations "best", "good", "suspect", and "poor". We recommend that users use only "best" and "good" scenes for evaluations where geolocation is important (e.g., comparison to field sites). For some scenes, this metadata is not reflected in the higher-level products (e.g., land surface temperature, evapotranspiration, etc.). While this metadata is always available in the geolocation product, to save users additional download, we have produced a summary text file that includes the geolocation quality flags for all scenes from launch to present. At a later date, all higher-level products will reflect the geolocation quality flag correctly (the field name is GeolocationAccuracyQA). *During the time period of May 15th, 2025, through July 1st, 2025, ECOSTRESS data was noisier than expected. Cycling the payload resolved the issue, but researchers should use all levels of ECOSTRESS data acquired during this time period with caution. * During the time period of January 1st, 2023, through September 30th, 2023, ECOSTRESS STARS and the resulting ET products are considered lower quality due to the priors used in the STARS model. The bug was corrected, and the lower quality data will be reprocessed. * Coarse Resolution Artifacts: Users may sometimes observe coarse resolution (~500m - 1km) artifacts in the L3 and L4 gridded and tiled products. These artifacts are caused by corresponding artifacts within the ECOSTRESS Tiled Ancillary NDVI and Albedo L2 Global 70 m (ECO_L2T_STARS) Version 2 data product. The ECO_L2T_STARS product is produced through a data fusion of Suomi NPP VIIRS (~500 m - 1 km resolution) and Harmonized Landsat Sentinel-2 (HLS, 30 m) products. When there is significant temporal lag between HLS acquisitions, the VIIRS data dominates, which can produce coarse resolution artifacts in the ECO_L2T_STARS product. This typically corresponds to relatively large uncertainty values.