Evaporation (West Gharraf, Iraq - Dekadal) - WaPOR v2

The Evaporation (E) data component is the actual evaporation of the soil surface. The value of each pixel represents the total annual evaporation for that specific year. **Data publication:** 2023-01-01 **Supplemental Information:** No data value: -9999 Unit: mm Scale Factor : 0.1 Map code : L3-E-A Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. This implies that other temporal aggregations (monthly, seasonal, annual), and layers that depend on those, are updated as well. Practically this means that a final annual aggregation of the most recent full calendar year can only be produced after the end of February. Likewise, the final monthly aggregation of the most recent calendar months can only be produced 2 full months later. **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. License: CC-BY-4.0 **Contact points:** Resource Contact: [WaPOR](mailto:wapor@fao.org) Metadata Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** See evaporation (E) by dekad for further information. The annual total is obtained by taking the E in mm/day, multiplying by the number of days in a dekad, and summing the dekads of each year. **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

The transpiration (T) data component (dekadal, in mm/day) is the actual transpiration of the vegetation canopy. The value of each pixel represents the average daily actual transpiration for that specific dekad. **Data publication:** 2023-01-01 **Supplemental Information:** No data value: 255 Unit: mm Scale Factor : 0.1 Map code : L3-T-D Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [WaPOR](mailto:wapor@fao.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** The calculation of the transpiration is based on the ETLook model described in Bastiaanssen et al. (2012). It uses the Penman-Monteith equation, adapted to remote sensing input data. The Penman-Monteith equation predicts the rate of total evaporation and transpiration using commonly measured meteorological data (solar radiation, air temperature, vapour content and wind speed). It has become the FAO standard for calculating the actual and reference evapotranspiration (see FAO Irrigation and Drainage paper 56, Allen et al. 1998). The following data is used for calculating transpiration: • Daily: incoming solar radiation and weather data (temperature, humidity, wind speed and precipitation); • Dekadal: NDVI, surface albedo and soil moisture stress; • Seasonal: Land Cover; • Static: Digital Elevation Model. Data component developed through collaboration with the FRAME Consortium. More information can be found at: http://www.fao.org/in-action/remote-sensing-for-water-productivity/en/ **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

The Evaporation (E) data component (dekadal, in mm/day) is the actual evaporation of the soil surface. The value of each pixel represents the average daily actual evaporation for that specific dekad. The data is provided from January 2009 to 2023. **Data publication:** 2020-01-01 **Supplemental Information:** No data value: 255 Unit: mm Map code : L1-E-D Scale Factor : 0.1 Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. **Citation:** FAO 2018. WaPOR Database Methodology: Level 1. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [WaPOR](mailto:wapor@fao.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** The calculation of the evaporation is based on the ETLook model described in Bastiaanssen et al. (2012). It uses the Penman-Monteith equation, adapted to remote sensing input data. The Penman-Monteith equation predicts the rate of total evaporation and transpiration using commonly measured meteorological data (solar radiation, air temperature, vapour content and wind speed). It has become the FAO standard for calculating the actual and reference evapotranspiration (see FAO Irrigation and Drainage paper 56, Allen et al. 1998). The following data is used for calculating evaporation: - Daily: incoming solar radiation and weather data (temperature, humidity, wind speed and precipitation); - Dekadal: NDVI, surface albedo and soil moisture stress; - Seasonal: Land Cover; - Static: Digital Elevation Model. Data component developed through collaboration with the FRAME Consortium. More information can be found on the WaPOR Website. **Resource constraints:** Creative Commons Attribution 4.0 International (CC BY 4.0) **Online resources:** Download the data from Google Cloud Storage Evaporation (Africa and Near East - Dekadal - 250m)

The Evaporation (E) data component (dekadal, in mm/day) is the actual evaporation of the soil surface. The value of each pixel represents the average daily actual evaporation for that specific dekad. **Data publication:** 2023-01-01 **Supplemental Information:** No data value: 255 Unit: mm Scale Factor : 0.1 Map code : L3-E-D.LDA Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [WaPOR](mailto:wapor@fao.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** The calculation of the evaporation is based on the ETLook model described in Bastiaanssen et al. (2012). It uses the Penman-Monteith equation, adapted to remote sensing input data. The Penman-Monteith equation predicts the rate of total evaporation and transpiration using commonly measured meteorological data (solar radiation, air temperature, vapour content and wind speed). It has become the FAO standard for calculating the actual and reference evapotranspiration (see FAO Irrigation and Drainage paper 56, Allen et al. 1998). The following data is used for calculating evaporation: - Daily: incoming solar radiation and weather data (temperature, humidity, wind speed and precipitation); - Dekadal: NDVI, surface albedo and soil moisture stress; - Seasonal: Land Cover; - Static: Digital Elevation Model. Data component developed through collaboration with the FRAME Consortium. More information can be found at: http://www.fao.org/in-action/remote-sensing-for-water-productivity/en/ **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

The evaporation (E) data component (dekadal, in mm/day) is the actual evaporation of the soil surface. The value of each pixel represents the average daily actual evaporation for that specific dekad. The data is provided from January 2009 to 2023. **Data publication:** 2020-01-01 **Supplemental Information:** No data value: 255 Unit: mm Scale Factor: 0.1 Map code: L2-E-D Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. **Citation:** FAO 2018. WaPOR Database Methodology: Level 2. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [WaPOR](mailto:wapor@fao.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** The calculation of the evaporation is based on the ETLook model described in Bastiaanssen et al. (2012). It uses the Penman-Monteith equation, adapted to remote sensing input data. The Penman-Monteith equation predicts the rate of total evaporation and transpiration using commonly measured meteorological data (solar radiation, air temperature, vapour content and wind speed). It has become the FAO standard for calculating the actual and reference evapotranspiration (see FAO Irrigation and Drainage paper 56, Allen et al. 1998). The following data is used for calculating evaporation: - Daily: incoming solar radiation and weather data (temperature, humidity, wind speed and precipitation); - Dekadal: NDVI, surface albedo and soil moisture stress; - Seasonal: Land Cover; - Static: Digital Elevation Model. Data component developed through collaboration with the FRAME Consortium. More information can be found at: http://www.fao.org/in-action/remote-sensing-for-water-productivity/en/. Until December 2019 the base input layers (NDVI, albedo, and fAPAR) for the Level 2 (100m) products were derived from the Proba-V satellite. Proba-V was decommissioned in June 2020. From January 2020 onwards the base input layers of NDVI, albedo and fAPAR for level 2 are derived from the Copernicus Sentinel-2 mission. **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

The Evaporation (E) data component (dekadal, in mm/day) is the actual evaporation of the soil surface. The value of each pixel represents the average daily actual evaporation for that specific dekad. **Data publication:** 2020-01-01 **Supplemental Information:** No data value: 255 Unit: mm Scale Factor : 0.1 Map code : L3-E-D Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [WaPOR](mailto:wapor@fao.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** The calculation of the evaporation is based on the ETLook model described in Bastiaanssen et al. (2012). It uses the Penman-Monteith equation, adapted to remote sensing input data. The Penman-Monteith equation predicts the rate of total evaporation and transpiration using commonly measured meteorological data (solar radiation, air temperature, vapour content and wind speed). It has become the FAO standard for calculating the actual and reference evapotranspiration (see FAO Irrigation and Drainage paper 56, Allen et al. 1998). The following data is used for calculating evaporation: - Daily: incoming solar radiation and weather data (temperature, humidity, wind speed and precipitation); - Dekadal: NDVI, surface albedo and soil moisture stress; - Seasonal: Land Cover; - Static: Digital Elevation Model. Data component developed through collaboration with the FRAME Consortium. More information can be found at: http://www.fao.org/in-action/remote-sensing-for-water-productivity/en/ **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage