Number of rainy days in a month (Jordan River Basin - Monthly - 100m)

Number of rainy days calculated in the Nile basin area. For every pixel, the number of rainy days in a month is reported. This dataset is created by using daily rainfall data from WaPOR precipitation data. **Data publication:** 2020-06-01 **Supplemental Information:** No data value: -9999 Unit: mm **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Resource Contact: [WaPOR](mailto:wapor@fao.org) Metadata Contact: [Solomon Seyoum](mailto:s.seyoum@un-ihe.org) **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

Number of rainy days calculated in the Litani River Basin area. For every pixel, the number of rainy days in a month is reported. This dataset is created by using daily rainfall data from the Climate Hazards Group InfraRed Precipitation with Station data (CHIRPS). **Data publication:** 2019-06-01 **Supplemental Information:** No data value: -9999 Unit: days/month **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [Bich Tran](mailto:b.tran@un-ihe.org) Resource Contact: [Bich Tran](mailto:b.tran@un-ihe.org) **Data lineage:** The daily precipitation data was used to compute the number of rainy days per month. The monthly data is obtained by counting the number of daily precipitation higher than 0.201 in a month for each pixel. Then, the data was resampled to 100m resolution. More information at https://wapor.apps.fao.org/catalog/WAPOR_2/1/L1_PCP_E. **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

For every pixel, the number of rainy days in a month is reported. This dataset is created by using daily rainfall data from WaPOR precipitation data. **Data publication:** 2020-06-01 **Supplemental Information:** No data value: -9999 Unit: days/month **Contact points:** Metadata Contact: [Solomon Seyoum](mailto:s.seyoum@un-ihe.org) **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

The evapotranspiration from precipitation (ETRAIN) is the portion of the actual evapotranspiration and Interception (ETIa) that is satified from precipitation. It is computed from precipitation, actual evapotranspiration and soil moisture and calculated by spliting ETIa to rainfall and incremental ET using pixel based Soil Moisture Water Balance Model. **Data publication:** 2020-06-01 **Supplemental Information:** No data value: -9999 Unit: mm Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. This implies that other temporal aggregations (monthly, seasonal, annual), and layers that depend on those, are updated as well. Practically this means that a final annual aggregation of the most recent full calendar year can only be produced after the end of February. Likewise, the final monthly aggregation of the most recent calendar months can only be produced 2 full months later. **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [Solomon Seyoum](mailto:s.seyoum@un-ihe.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

Precipitation minus actual evapotranspiration (P-ET) calculated over the Jordan River Basin area. The P-ET is the difference between WaPOR precipitation (based on CHIRPS) and the actual evapotranspiration and interception. **Data publication:** 2020-06-01 **Supplemental Information:** No data value: -9999 Unit: mm Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. This implies that other temporal aggregations (monthly, seasonal, annual), and layers that depend on those, are updated as well. Practically this means that a final annual aggregation of the most recent full calendar year can only be produced after the end of February. Likewise, the final monthly aggregation of the most recent calendar months can only be produced 2 full months later. **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [Solomon Seyoum](mailto:s.seyoum@un-ihe.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

Incremental evapotranspiration calculated for the Jordan River Basin area. The incremental evapotranspiration is part of the actual evapotranspiration and Interception (ETIa) that is not satified from precipitation but from supply or runoff from other cells or from groundwater. It is calculated by spliting ETIa to rainfall and incremental ET using pixel based soil moisture water balance model. **Data publication:** 2020-06-01 **Supplemental Information:** No data value: -9999 Unit: mm Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. This implies that other temporal aggregations (monthly, seasonal, annual), and layers that depend on those, are updated as well. Practically this means that a final annual aggregation of the most recent full calendar year can only be produced after the end of February. Likewise, the final monthly aggregation of the most recent calendar months can only be produced 2 full months later. **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [Solomon Seyoum](mailto:s.seyoum@un-ihe.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage