Quality of normalized difference vegetation index (Gezira, Sudan - Dekadal - 30m) - WaPOR v2

The layer gives an indication of the quality of the NDVI input data. It shows whether a valid observation was available for that dekad, and if not, the length of the data gap since the nearest valid observation, in dekads. The data is provided in near real time from January 2009 to 2023. **Data publication:** 2020-01-01 **Supplemental Information:** No data value: 255 Unit: Percentage (%) Scale Factor : 1 Map code : L3-GEZ-QUAL-NDVI-LT **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Resource Contact: [WaPOR](mailto:wapor@fao.org) Metadata Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** The quality layer is produced during the compositing and smoothing of the NDVI. The quality index (QI) for every pixel in each dekad depicts the number of dekads since the last valid observation used for reconstruction. The fundamental idea is that the longer the gap, the less reliable the smoothing is. When a number of consecutive dekads did not have direct observations for calculating the NDVI, the quality layer pixel value of the consecutive dekadal NDVI quality layers will represent the cumulative number of dekads since a valid observation. The user can use consecutive NDVI Quality layers to calculate the length of the gap between valid observations. In the case that the pixel observation is usable and no reconstruction was needed, the QI is set to 0 (ideal situation). For the observations at the profile edges, it is assumed that the (a priori unknown) observations preceding the first valid observation and following the last valid observations are "good".\n\nThis quality layer depicts the quality for the NDVI, fAPAR, albedo and NPP, as all these data components rely on the same input, i.e. the spectral reflectance data. Furthermore, the length of the data gap is the same. Data component developed through collaboration with the FRAME Consortium. More information can be found at: http://www.fao.org/in-action/remote-sensing-for-water-productivity/ **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

The layer gives an indication of the quality of the NDVI input data. It shows whether a valid observation was available for that dekad, and if not, the length of the data gap since the nearest valid observation, in dekads. The data is provided in near real time from January 2015 to 2023. **Data publication:** 2021-01-01 **Supplemental Information:** No data value: 255 Unit: Number of Dekads (D) Scale Factor : 0.1 Map code : L3-QUAL-NDVI-D **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Resource Contact: [WaPOR](mailto:wapor@fao.org) Metadata Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** The quality layer is produced during the compositing and smoothing of the NDVI. The quality index (QI) for every pixel in each dekad depicts the number of dekads since the last valid observation used for reconstruction. The fundamental idea is that the longer the gap, the less reliable the smoothing is. When a number of consecutive dekads did not have direct observations for calculating the NDVI, the quality layer pixel value of the consecutive dekadal NDVI quality layers will represent the cumulative number of dekads since a valid observation. The user can use consecutive NDVI Quality layers to calculate the length of the gap between valid observations. In the case that the pixel observation is usable and no reconstruction was needed, the QI is set to 0 (ideal situation). For the observations at the profile edges, it is assumed that the (a priori unknown) observations preceding the first valid observation and following the last valid observations are "good".\n\nThis quality layer depicts the quality for the NDVI, fAPAR, albedo and NPP, as all these data components rely on the same input, i.e. the spectral reflectance data. Furthermore, the length of the data gap is the same. Data component developed through collaboration with the FRAME Consortium. More information can be found at: http://www.fao.org/in-action/remote-sensing-for-water-productivity/ **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

The layer gives an indication of the quality of the NDVI input data. It shows whether a valid observation was available for that dekad, and if not, the length of the data gap since the nearest valid observation, in dekads. The data is provided from January 2022 to 2023. **Data publication:** 2020-01-01 **Supplemental Information:** No data value: 255 Unit: Number of Dekads (D) Scale Factor : 0.1 Map code : L3-QUAL-NDVI-D **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Resource Contact: [WaPOR](mailto:wapor@fao.org) Metadata Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** The quality layer is produced during the compositing and smoothing of the NDVI. The quality index (QI) for every pixel in each dekad depicts the number of dekads since the last valid observation used for reconstruction. The fundamental idea is that the longer the gap, the less reliable the smoothing is. When a number of consecutive dekads did not have direct observations for calculating the NDVI, the quality layer pixel value of the consecutive dekadal NDVI quality layers will represent the cumulative number of dekads since a valid observation. The user can use consecutive NDVI Quality layers to calculate the length of the gap between valid observations. In the case that the pixel observation is usable and no reconstruction was needed, the QI is set to 0 (ideal situation). For the observations at the profile edges, it is assumed that the (a priori unknown) observations preceding the first valid observation and following the last valid observations are "good".\n\nThis quality layer depicts the quality for the NDVI, fAPAR, albedo and NPP, as all these data components rely on the same input, i.e. the spectral reflectance data. Furthermore, the length of the data gap is the same. Data component developed through collaboration with the FRAME Consortium. More information can be found at: http://www.fao.org/in-action/remote-sensing-for-water-productivity/ **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

The layer gives an indication of the quality of the NDVI input data. It shows whether a valid observation was available for that dekad, and if not, the length of the data gap since the nearest valid observation, in dekads. The data is provided from January 2009 to 2023. **Data publication:** 2020-01-01 **Supplemental Information:** No data value: 255 Unit: Number of Dekads (D) Map code : L3-QUAL-NDVI-D.AWA **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [WaPOR](mailto:wapor@fao.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** The quality layer is produced during the compositing and smoothing of the NDVI. The quality index (QI) for every pixel in each dekad depicts the number of dekads since the last valid observation used for reconstruction. The fundamental idea is that the longer the gap, the less reliable the smoothing is. When a number of consecutive dekads did not have direct observations for calculating the NDVI, the quality layer pixel value of the consecutive dekadal NDVI quality layers will represent the cumulative number of dekads since a valid observation. The user can use consecutive NDVI Quality layers to calculate the length of the gap between valid observations. In the case that the pixel observation is usable and no reconstruction was needed, the QI is set to 0 (ideal situation). For the observations at the profile edges, it is assumed that the (a priori unknown) observations preceding the first valid observation and following the last valid observations are "good".\n\nThis quality layer depicts the quality for the NDVI, fAPAR, albedo and NPP, as all these data components rely on the same input, i.e. the spectral reflectance data. Furthermore, the length of the data gap is the same. Data component developed through collaboration with the FRAME Consortium. More information can be found at: http://www.fao.org/in-action/remote-sensing-for-water-productivity/ **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

The layer gives an indication of the quality of the NDVI input data. It shows whether a valid observation was available for that dekad, and if not, the length of the data gap since the nearest valid observation, in dekads. The data is provided from January 2009 to 2023. **Data publication:** 2020-01-01 **Supplemental Information:** No data value: 255 Unit: Number of Dekads (D) Map code : L3-QUAL-NDVI-D.ZAN **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [WaPOR](mailto:wapor@fao.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** The quality layer is produced during the compositing and smoothing of the NDVI. The quality index (QI) for every pixel in each dekad depicts the number of dekads since the last valid observation used for reconstruction. The fundamental idea is that the longer the gap, the less reliable the smoothing is. When a number of consecutive dekads did not have direct observations for calculating the NDVI, the quality layer pixel value of the consecutive dekadal NDVI quality layers will represent the cumulative number of dekads since a valid observation. The user can use consecutive NDVI Quality layers to calculate the length of the gap between valid observations. In the case that the pixel observation is usable and no reconstruction was needed, the QI is set to 0 (ideal situation). For the observations at the profile edges, it is assumed that the (a priori unknown) observations preceding the first valid observation and following the last valid observations are "good".\n\nThis quality layer depicts the quality for the NDVI, fAPAR, albedo and NPP, as all these data components rely on the same input, i.e. the spectral reflectance data. Furthermore, the length of the data gap is the same. Data component developed through collaboration with the FRAME Consortium. More information can be found at: http://www.fao.org/in-action/remote-sensing-for-water-productivity/ **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

The layer gives an indication of the quality of the NDVI input data. It shows whether a valid observation was available for that dekad, and if not, the length of the data gap since the nearest valid observation, in dekads. The data is provided from January 2009 to 2023. **Data publication:** 2020-01-01 **Supplemental Information:** No data value: 255 Unit: Number of Dekads (D) Scale Factor : 0.1 Map code : L3-QUAL-NDVI-D **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [WaPOR](mailto:wapor@fao.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** The quality layer is produced during the compositing and smoothing of the NDVI. The quality index (QI) for every pixel in each dekad depicts the number of dekads since the last valid observation used for reconstruction. The fundamental idea is that the longer the gap, the less reliable the smoothing is. When a number of consecutive dekads did not have direct observations for calculating the NDVI, the quality layer pixel value of the consecutive dekadal NDVI quality layers will represent the cumulative number of dekads since a valid observation. The user can use consecutive NDVI Quality layers to calculate the length of the gap between valid observations. In the case that the pixel observation is usable and no reconstruction was needed, the QI is set to 0 (ideal situation). For the observations at the profile edges, it is assumed that the (a priori unknown) observations preceding the first valid observation and following the last valid observations are "good".\n\nThis quality layer depicts the quality for the NDVI, fAPAR, albedo and NPP, as all these data components rely on the same input, i.e. the spectral reflectance data. Furthermore, the length of the data gap is the same. Data component developed through collaboration with the FRAME Consortium. More information can be found at: http://www.fao.org/in-action/remote-sensing-for-water-productivity/ **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage