Maryland Federal Flood Risk Management Standard

✦ DISCOVERED BY ORIONAIFEMAEnvironmentUnited States of America
Map preview of Maryland Federal Flood Risk Management StandardUnited States of America

About this dataset

The Federal Flood Risk Management Standard (FFRMS) floodplain was developed by the Federal Emergency Management Agency (FEMA) to improve the resilience of communities and federal assets against the impacts of flooding. Through a series of Federal executive orders, the FFRMS was established (EOs 11988 and 13690); cancelled in 2017 (EO 13807); re-established in 2021 (EO 14030) and also mapped as the FFRMS floodplain; and then cancelled again in 2025 (EO 14148). This FFRMS floodplain data set was provided by FEMA at the request of Maryland Department of the Environment and is the same data available through the Flood Standard Support Tool (https://floodstandard.climate.gov/).3-meter DEM resolution terrain resolution used for this mapping. In some cases, 1-meter DEM data may have been re-sampled to a 3-meter DEM resolution. FEMA did this to create a consistent FFRMS data set nationwide. The primary sources of data used by FEMA to develop the FFRMS floodplain were USGS’s The National Map for terrain and FEMA’s National Flood Hazard Layer for regulatory water surface elevations. In Riverine areas, the FFRMS floodplain is derived from the National Flood Hazard Layer using the methodology developed by the Maryland Department of the Environment for production of the Riverine CRAB using a linear interpolation applied between two riverine cross sections from the National Flood Hazard Layer (FEMA 100-year floodplain). A freeboard (2-feet for the 2-foot freeboard map, and 3-feet for the 3-foot freeboard map) was added to the 100-year floodplain water surface elevation at each riverine cross section in the National Flood Hazard Layer data set. The new elevations were then interpolated to create a freeboard elevation gradient. This elevation gradient was used to map the horizontal extents of the FFRMS floodplain boundary based on topographic data. Additional details can be found here: https://www.fema.gov/sites/default/files/documents/fema_ffrms-data-methodology.pdfThe methodology to develop the coastal FFRMS floodplain (water surface) raster utilized the coastal static Base Flood Elevation values from the National Flood Hazard Layer as the water surface. To create an expanded surface, these water surface values were collected at uniformly spaced points along the boundary of the effective coastal 1%-annual-chance flood mapping and expanded inland utilizing Thiessen polygons. The Thiessen polygons were converted to a raster matching the spatial resolution of the terrain DEM, and the difference between the water surface elevation raster and the terrain was computed. Areas where the water surface raster value was higher than the terrain raster value indicate the area of flooding. Each freeboard value (2-foot and 3-foot) was mapped independently in whole foot increments utilizing the prior, lower freeboard value boundary of flooding to establish an expanded surface. One limitation of this methodology is that wave runup was modeled for the 100-year floodplain but not remodeled at the higher water surface elevation conditions.Please note that the CRAB data set shows inundation depths derived as the height difference between the DEM and the water surface elevation, whereas the FFRMS shows water surface elevations only. Their horizontal extents may be compared, but users should be careful comparing any color coding or depth values provided in the two applications.

Related datasets

✦ Suggested by OrionAI
FEMA NFHL Map Service

The National Flood Hazard Layer (NFHL) data incorporates all Flood Insurance Rate Map (FIRM) databases published by the Federal Emergency Management Agency (FEMA), and any Letters of Map Revision (LOMRs) that have been issued against those databases since their publication date. It is updated on a monthly basis. The FIRM Database is the digital, geospatial version of the flood hazard information shown on the published paper FIRMs. The FIRM Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The FIRM Database is derived from Flood Insurance Studies (FISs), previously published FIRMs, flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by FEMA. The NFHL is available as State or US Territory data sets. Each State or Territory data set consists of all FIRM Databases and corresponding LOMRs available on the publication date of the data set. The specification for the horizontal control of FIRM Databases is consistent with those required for mapping at a scale of 1:12,000. This file is georeferenced to the Earth's surface using the Geographic Coordinate System (GCS) and North American Datum of 1983.

Environment · FEMA
ViewSave
LSC Flood Plain Changes

The National Flood Hazard Layer (NFHL) data incorporates all Flood Insurance Rate Map (FIRM) databases published by the Federal Emergency Management Agency (FEMA), and any Letters of Map Revision (LOMRs) that have been issued against those databases since their publication date. It is updated on a monthly basis. The FIRM Database is the digital, geospatial version of the flood hazard information shown on the published paper FIRMs. The FIRM Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The FIRM Database is derived from Flood Insurance Studies (FISs), previously published FIRMs, flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by FEMA. The NFHL is available as State or US Territory data sets. Each State or Territory data set consists of all FIRM Databases and corresponding LOMRs available on the publication date of the data set. The specification for the horizontal control of FIRM Databases is consistent with those required for mapping at a scale of 1:12,000. This file is georeferenced to the Earth's surface using the Geographic Coordinate System (GCS) and North American Datum of 1983.

Water · FEMA
ViewSave
FIRM Data

The National Flood Hazard Layer (NFHL) data incorporates all Flood Insurance Rate Map (FIRM) databases published by the Federal Emergency Management Agency (FEMA), and any Letters of Map Revision (LOMRs) that have been issued against those databases since their publication date. It is updated on a monthly basis. The FIRM Database is the digital, geospatial version of the flood hazard information shown on the published paper FIRMs. The FIRM Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The FIRM Database is derived from Flood Insurance Studies (FISs), previously published FIRMs, flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by FEMA. The NFHL is available as State or US Territory data sets. Each State or Territory data set consists of all FIRM Databases and corresponding LOMRs available on the publication date of the data set. The specification for the horizontal control of FIRM Databases is consistent with those required for mapping at a scale of 1:12,000. This file is georeferenced to the Earth's surface using the Geographic Coordinate System (GCS) and North American Datum of 1983.

Water · FEMA
ViewSave
FEMA Flood Zones

https://coast.noaa.gov/arcgis/rest/services/FloodExposureMapper/CFEM_FEMAFloodZones/MapServerFEMA provides access to the National Flood Hazard Layer (NFHL) through web mapping services. The NFHL is a computer database that contains FEMA.s flood hazard map data. The simplest way for you to access the flood hazard data, including the NFHL, is through FEMAs Map Service Center (MSC). If you want to explore the current digital effective flood hazard data in a map, the best tool to use is the NFHL Viewer. From the NFHL Viewer, you may view, download, and print flood maps for your location The data depict effective flood hazard information and supporting data used to develop the information. The primary flood hazard classification is indicated in the Flood Hazard Zones layer.

Environment · FEMA
ViewSave
JLB USA Flood Risk

Flood Hazard Mapping is an important part of the U.S. National Flood Insurance Program. The Federal Emergency Management Agency publishes Flood Insurance Rate Maps that show areas where the annual likelihood of a flood is 1% or greater (Special Flood Hazard Areas). Because standard homeowners insurance does not cover flood damage the congress created the National Flood Insurance Program in 1968. In participating communities homeowners and renters are able to by federally-backed flood insurance. Dataset Summary This layer's data represents Federal Emergency Management Agency's (FEMA) Flood Insurance Rate Map (FIRM) data. This data is based upon the original vector data from FIRM. These data are important for floodplain management, mitigation, and insurance activities for the National Flood Insurance Program (NFIP). The National Flood Hazard Layer (NFHL) data present the flood risk information depicted on the FIRM in a digital format suitable for use in electronic mapping applications. The NFHL database is a subset of the information created for the Flood Insurance Studies (FIS) and serves as a means to archive a portion of the information collected during the FIS. The NFHL data incorporates Digital Flood Insurance Rate Map (DFIRM) databases published by Federal Emergency Management Agency (FEMA).  This layer initially shows the flood zones by FEMA Flood Zone Designations with this symbology: The layer covers the continental U.S. Link to source metadata What can you do with this layer? The vector features for this layer can be used for visualization and analysis in ArcGIS. The features in this layer are only visible at scales larger than 1:1,155,582. The features can also be downloaded for use with ArcGIS desktop by with the Extract Landscape Source Data tool. This layer is part of a larger collection of landscape layers that you can use to perform a wide variety of mapping and analysis tasks. This collection includes a raster layer that was derived from these data.

Environment · FEMA
ViewSave
USA Flood Risk

Flood Hazard Mapping is an important part of the U.S. National Flood Insurance Program. The Federal Emergency Management Agency publishes Flood Insurance Rate Maps that show areas where the annual likelihood of a flood is 1% or greater (Special Flood Hazard Areas). Because standard homeowners insurance does not cover flood damage the congress created the National Flood Insurance Program in 1968. In participating communities homeowners and renters are able to by federally-backed flood insurance. Dataset Summary This layer's data represents Federal Emergency Management Agency's (FEMA) Flood Insurance Rate Map (FIRM) data. This data is based upon the original vector data from FIRM. These data are important for floodplain management, mitigation, and insurance activities for the National Flood Insurance Program (NFIP). The National Flood Hazard Layer (NFHL) data present the flood risk information depicted on the FIRM in a digital format suitable for use in electronic mapping applications. The NFHL database is a subset of the information created for the Flood Insurance Studies (FIS) and serves as a means to archive a portion of the information collected during the FIS. The NFHL data incorporates Digital Flood Insurance Rate Map (DFIRM) databases published by Federal Emergency Management Agency (FEMA).  This layer initially shows the flood zones by FEMA Flood Zone Designations with this symbology: The layer covers the continental U.S. Link to source metadata (Metadata is specific to each locale.) What can you do with this layer? The vector features for this layer can be used for visualization and analysis in ArcGIS. The features in this layer are only visible at scales larger than 1:1,155,582. The features can also be downloaded for use with ArcGIS desktop by with the Extract Landscape Source Data tool. This layer is part of a larger collection of landscape layers that you can use to perform a wide variety of mapping and analysis tasks. This collection includes a raster layer that was derived from this data representing the locations of wetlands. Important Note: This layer is available for users with an ArcGIS Organizational subscription. To access this layer, you'll need to sign in with an account that is a member of an organizational subscription.  If you don't have an organizational subscription, you can create a new account and then sign up for a 30 day trial of ArcGIS Online. This service is currently in beta. For more information, see the Landscape Layers group on ArcGIS Online.

Environment · FEMA
ViewSave

Indexed by OrionGIS from FEMA flood maps (NFHL). Data is loaded from the publisher's own server when you use it. Permanent link