Canada GIS data

Overview This feature service provides land use designation information for the County of Brant Official Plan. It supports viewing and referencing designated land use areas used for municipal planning and growth management. Contents Land Use Designation: Polygon features representing official plan land use designations across the County of Brant. The layer includes designation information, settlement context, and whether each area falls within the built-up area or settlement area framework. Licence This service is shared under CC0.

uav imagery by Faine Greenwood, acquired 2025-06-08 to 2025-06-08, 8.2 cm per pixel, published on OpenAerialMap.

As part of A Place to Grow: Growth Plan for the Greater Golden Horseshoe, the Minister released a new policy framework for protecting employment areas that are critical to the region’s economy. These changes provide flexibility by allowing municipalities to consider employment area conversions prior to the municipal comprehensive review while ensuring protections are in place to protect key employment areas as needed. To ensure important employment areas are not converted during this window, the province introduced a policy that allows the Minister to identify provincially significant employment zoneswhich are employment areas that cannot be converted prior to the municipal comprehensive review without a more comprehensive assessment approved by the province. Regional Intensification Corridors are major transportation and growth corridors where higher-density, mixed-use development is encouraged to support transit investment, efficient infrastructure use, and the creation of complete communities. These corridors play a key role in accommodating population and employment growth within the existing urban area. This data is intended to be used in conjuction with other related mapping layers for this schedule, and may be impacted by other schedules, with consideration to the text of Brampton Plan.

Mapping depicts Brampton Plan Schedule 9 Waste Management Sites which deal with the transfer, sorting or incineration of waste materials. This data is intended to be used in conjuction with other related mapping layers for this schedule, and may be impacted by other schedules, with consideration to the text of Brampton Plan.

satellite imagery by Robert Howe, acquired 2026-04-08 to 2026-04-08, 3.0 cm per pixel, published on OpenAerialMap.

uav imagery by bard, acquired 2026-04-08 to 2026-04-08, 2.3 cm per pixel, published on OpenAerialMap.

uav imagery by Hawkinson Media, LLC, acquired 2026-05-25 to 2026-05-26, 1.7 cm per pixel, published on OpenAerialMap.

Collection of Land Cover products for Canada as produced by Natural Resources Canada using Landsat satellite imagery. This collection of cartographic products offers classified Land Cover of Canada at a 30 metre scale, updated on a 5 year basis.

The High-Resolution Rapid Refresh (HRRR) is a NOAA real-time 3-km resolution, hourly updated, cloud-resolving, convection-allowing atmospheric model. HRRR runs are initialized by 3-km grids with 3-km radar assimilation. Radar data is assimilated in the HRRR every 15 minutes over a 1-hour period adding further detail to that provided by the hourly overarching 13-km Rapid Refresh (RAP) model. The HRRR model is especially useful for short-term weather forecasting, including severe weather events, aviation weather, and renewable energy applications. The data are available in GRIB2 format and are delivered to Azure as part of the NOAA Open Data Dissemination (NODD) Program.

Layer Overview and Intended UseThe Tropospheric Emissions: Monitoring of Pollution (TEMPO) Nitrogen Dioxide Vertical Column Troposphere Near Real-Time (NRT) layer provides information on the amount of nitrogen dioxide in the troposphere. This is provided as the total number of nitrogen dioxide molecules in the tropospheric column of air above one square centimeter on the Earth’s surface (units: molecules/cm^2). The TEMPO NRT nitrogen dioxide files are produced using a fast version of the TEMPO baseline retrieval processor. TEMPO NRT nitrogen dioxide Level 3 files provide trace gas information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The NRT processing optimizes radiance calibration, image navigation and registration, and cloud and trace gas retrievals for rapid processing, while ensuring that product quality is sufficient for most NRT applications. The data have been converted from their native file format (netCDF4) to Cloud Raster Format (CRF). Temporal CoverageThe temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the field of regard and in the evenings over the western portion of the field of regard. Each image is presented with the starting timestamp of the corresponding TEMPO scan. Due to the nature of the TEMPO instrument’s east to west scanning pattern, each image is a composite of measurements taken over a period of 40-60 minutes, depending on the spatial coverage of the scan. Data are updated hourly with any new scans that have been received. Data older than two days (48 hours) are removed from the service. On the rare occasion that the TEMPO instrument is not collecting data for an extended period of time, this service will retain only the latest scan until operations resume. The TEMPO operations log may be found on the TEMPO site.  Geographic CoverageImagery is available for the TEMPO field of regard covering the continental United States (CONUS), and much of Mexico, Canada, and the Caribbean. The imagery in this image service is regridded onto a 0.02º longitude x 0.02º latitude grid and presented in the geographic coordinate system WGS 1984. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (33.5°N, 89.2°W) in WGS 1984.   Data FilteringThe layer is filtered to remove low-quality pixels using the main data quality flag (removing low confidence measurements), solar zenith angle (removing data retrieved at high solar zenith angles), and effective cloud fraction (removing data where clouds obscure the tropospheric column) variables. The filters applied are set to remove pixels based on the following: main_data_quality_flag > 1, eff_cloud_fraction > 0.5, or solar_zenith_angle > 80.  Data Validation and Limitatations of UseThese data should be considered as provisional products per the Provisional Product Maturity level defined in the TEMPO validation plan. These data are at provisional maturity, which means that product performance has been demonstrated through a large, but still (seasonally or otherwise) limited number of independent measurements. The analysis is sufficient for limited qualitative determinations of product fitness-for-purpose, and the product is potentially ready for testing by operational users and may be suitable for scientific publication. Users may consult the TEMPO User Guide for descriptions of the data and associated known issues.  The information shown here is tropospheric column density (molecules per unit area in the lower atmosphere), not a concentration. Atmospheric concentration refers to the fractional amount of trace gas (e.g., nitrogen dioxide) relative to total air at a specific point, and changes with altitude. Conversion from column density to atmospheric concentration requires additional information, such as the state of the atmosphere and the vertical distribution of the column, which are not provided in this layer. The use of this layer to derive atmospheric concentrations of nitrogen dioxide is discouraged for the non-specialist. Recommended Usage NotesWhen viewing the image service in the Esri online map viewer, it is recommended to use the multidimensional slider rather than the default time slider. The multidimensional slider can be accessed via the “multidimensional” icon in the right-hand menu.  While qualitative analyses and general trends may remain similar between the TEMPO standard and NRT versions, merging versions for quantitative analysis is discouraged. For details on the changes in the data, please see the TEMPO User Guide and the TEMPO NRT Data Products User Guide and ATBD Supplement on the TEMPO site.  The TEMPO NRT ArcGIS service provides access to TEMPO NO2 NRT data earlier than the TEMPO standard NO2 data are available in the standard NO2 ArcGIS service. The TEMPO NRT products are useful for applications with low-latency requirements; however, it is recommended to switch to the TEMPO NO2 Standard Version 04 (V04) service, once the data becomes available in that service. TEMPO V04 data are available from September 17, 2025 to present and the service is updated daily with the previous day’s data. TEMPO Mission OverviewThe Tropospheric Emissions: Monitoring of Pollution (TEMPO) instrument is a grating spectrometer, sensitive to visible (VIS) and ultraviolet (UV) wavelengths of light with a spectral range of 290-490 + 540-740 nm and 0.6 nm spectral resolution. The TEMPO instrument is attached to the Earth-facing side of a commercial telecommunications satellite (Intelsat 40e) in geostationary orbit over 89˚ W longitude (about 22,000 miles above Earth’s equator). This allows TEMPO to maintain a continuous view of North America so that the instrument's light-collecting mirror can make a complete east-to-west scan of the field of regard hourly during daylight hours. By measuring sunlight reflected and scattered from the Earth's surface and atmosphere back to the instrument's detectors, TEMPO's ultraviolet and visible light sensors provide measurements of ozone, nitrogen dioxide, formaldehyde, and other constituents involved in the chemical dynamics of Earth’s atmosphere. The primary mission objective of TEMPO is to improve our understanding of air quality and its impacts. By providing near real-time data and comprehensive atmospheric composition measurements, TEMPO helps advance knowledge of the Earth system and improve air quality forecasting. These data also aid in quantifying how air quality affects vegetation, agriculture, and human health. ContactFor inquiries about this service, please contact larc-dl-asdc-tempo@mail.nasa.gov or post/view questions on the Earthdata Forum.

Layer Overview and Intended Use The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Nitrogen Dioxide Vertical Column Troposphere layer provides information on the amount of nitrogen dioxide in the troposphere. This is provided as the total number of nitrogen dioxide molecules in the tropospheric column of air above one square centimeter on the Earth’s surface (units: molecules/cm^2). Nitrogen dioxide Level 3 files provide trace gas information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The data have been converted from their native file format (netCDF4) to Cloud Raster Format (CRF). Temporal Coverage The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the field of regard and in the evenings over the western portion of the field of regard. Each image is presented with the starting timestamp of the corresponding TEMPO scan. Due to the nature of the TEMPO instrument’s east to west scanning pattern, each image is a composite of measurements taken over a period of 40-60 minutes, depending on the spatial coverage of the scan. Data are updated daily with the previous day's data. Data are available from September 17, 2025 to present and updated daily with the previous day’s data. The previous TEMPO data version (V03) was released publicly on May 24, 2024, and cover the time period from August 2, 2023 to September 16, 2025. All observations since the beginning of the mission are being reprocessed with V04 algorithms, with V04 products becoming publicly available in this service as they are reprocessed. The TEMPO V03 data are accessible via this service. Once the V03 data reprocessing is completed, the V03 service will be deprecated.   Geographic Coverage Imagery is available for the TEMPO field of regard covering the continental United States (CONUS), much of Mexico, Canada, and the Caribbean. The imagery in this image service is regridded onto a 0.02º longitude x 0.02º latitude grid and presented in the geographic coordinate system WGS 1984. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (33.5°N, 89.2°W) in WGS 1984. Data Filtering The layer is filtered to remove low-quality pixels using the main data quality flag (removing low confidence measurements), solar zenith angle (removing data retrieved at high solar zenith angles), and effective cloud fraction (removing where clouds obscure the tropospheric column) variables. The filters applied are set to remove pixels based on the following: main_data_quality_flag > 1, eff_cloud_fraction > 0.5, or solar_zenith_angle > 80.  Data Validation and Limitations of Use These data should be considered as provisional products per the Provisional Product Maturity level defined in the TEMPO validation plan.  These data are at provisional maturity, which means that product performance has been demonstrated through a large, but still (seasonally or otherwise) limited number of independent measurements. The analysis is sufficient for limited qualitative determinations of product fitness-for-purpose, and the product is potentially ready for testing by operational users and may be suitable for scientific publication.  Users may consult the TEMPO User Guide for descriptions of the data and associated known issues.  TEMPO V04 algorithms address known issues in the V03, improving data quality. As a result, there are differences between the TEMPO V03 and V04 data. While qualitative analyses and general trends may remain similar between both versions, merging versions for quantitative analysis is discouraged. For details on the changes in the data, please see the User Guide on the TEMPO site.  Note: The information shown here is tropospheric column density (molecules per unit area in the lower atmosphere), not a concentration. Atmospheric concentration refers to the fractional amount of trace gas (e.g., nitrogen dioxide) relative to total air at a specific point, and changes with altitude. Conversion from column density to atmospheric concentration requires additional information, such as the state of the atmosphere and the vertical distribution of the column, which are not provided in this layer. The use of this layer to derive atmospheric concentrations of nitrogen dioxide is discouraged for the non-specialist. Recommended Usage Notes When viewing the image service in the Esri online map viewer, it is recommended to use the multidimensional slider rather than the default time slider. The multidimensional slider can be accessed via the “multidimensional” icon in the right-hand menu.  TEMPO Mission Overview The Tropospheric Emissions: Monitoring of Pollution (TEMPO) instrument is a grating spectrometer, sensitive to visible (VIS) and ultraviolet (UV) wavelengths of light with a spectral range of 290-490 + 540-740 nm and 0.6 nm spectral resolution. The TEMPO instrument is attached to the Earth-facing side of a commercial telecommunications satellite (Intelsat 40e) in geostationary orbit over 91˚ W longitude (about 22,000 miles above Earth’s equator). This allows TEMPO to maintain a continuous view of North America so that the instrument's light-collecting mirror can make a complete east-to-west scan of the field of regard hourly during daylight hours. By measuring sunlight reflected and scattered from the Earth's surface and atmosphere back to the instrument's detectors, TEMPO's ultraviolet and visible light sensors provide measurements of ozone, nitrogen dioxide, formaldehyde, and other constituents involved in the chemical dynamics of Earth’s atmosphere. The primary mission objective of TEMPO is to improve our understanding of air quality and its impacts. By providing near real-time data and comprehensive atmospheric composition measurements, TEMPO helps advance knowledge of the Earth system and improve air quality forecasting. These data also aid in quantifying how air quality affects vegetation, agriculture, and human health. Contact For inquiries about this service, please contact larc-dl-asdc-tempo@mail.nasa.gov or post/view questions on the Earthdata Forum.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows disability status by sex and age group. This is shown by tract, county, and state boundaries. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized to show the percentage of elderly (65+) with a disability. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B18101Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows living arrangements of children and adults by age group. This is shown by tract, county, and state boundaries. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. This layer is symbolized to show the percentage of adults living with a spouse. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B09005 (formerly B09008), B09021Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows demographic context for child well-being work. This is shown by tract, county, and state boundaries. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized to show the percentage of child population (age under 18) that is living below the Federal poverty level. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B01001, B05009, B09001, B09005 (formerly B09008), B10002, B13016, B14005, B16003, B16004, B17020, B23008, B27010, B28005Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico   Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99).   Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows demographic context for senior well-being work. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   The layer is symbolized to show the percentage of population aged 65 and up (senior population), and the size of the symbols show the count of senior population. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B01001, B09021, B17020, B18101, B23027, B25072, B25093, B27010, B28005, C27001B-IData downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico   Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows computer ownership and internet access by age and race. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized to show the count of population age 18 to 64 in households and percent of population age 18 to 64 in households with no computer. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B28005, B28003, B28009B, B28009C, B28009D, B28009E, B28009F, B28009G, B28009H, B28009IData downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows tenure (owner or renter) by education level of householder. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized by count of occupied housing units and the overall homeownership rate. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B25013Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters).    The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico   Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows tenure (owner or renter) by race of householder. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized by the count of occupied housing units and the overall homeownership rate. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B25003, B25003B, B25003C, B25003D, B25003E, B25003F, B25003G, B25003H, B25003IData downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows household size by number of vehicles available. This is shown by tract, county, and state boundaries. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized to show the percentage of households with no vehicle available. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B08201Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows current marital status. Counts broken down by sex. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized by the count of all adults (15+) and the percentage of adults who are married. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B12001Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows children in grandparent households by age. This is shown by tract, county, and state boundaries. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. Only children in households in which the grandparent is the householder are included here. This is different from children in multigenerational households.  This layer is symbolized to show the percentage of children who are in the care of grandparents. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B10001, B10002, B09001 (Not all lines of ACS table B09001 are available in this feature layer.)Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases. Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows public vs. private school enrollment by sex by grade group. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. Any schools that receives public funding are considered public, including continuation schools and some charter & online schools.  This layer is symbolized to show the percentage and count of students in kindergarten through 12th grade who are enrolled in a private school. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B14002Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters).    The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows housing units by year built by tenure (owner or renter). This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. This layer is modified every few years to change the top-end and bottom-end categories of the years. This layer is symbolized to show the predominant period that housing units were built in. Predominant values are shown in the legend, as well as the count of all housing units. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B25034, B25036, B25035, B25037 (Not all lines of ACS table B25036 are available in this layer.)Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows workers' place of residence by commute length. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized to show the count of total commuters and the percentage of commuters whose commute is 90 minutes or more. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B08303Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows place of birth by citizenship status. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized to show the predominant area of birth among those who are foreign born as well as the count of the foreign-born population. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B05002 (Not all lines of this ACS table are available in this feature layer.)Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows six different types of disability. This is shown by tract, county, and state boundaries. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.  This layer is symbolized to show the percent of population with a disability. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B18101, B18102, B18103, B18104, B18105, B18106, B18107, C18108 (Not all lines of these ACS tables are available in this feature layer.)Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows household size by tenure (owner or renter). This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.  This layer is symbolized to show the average household size as well as the count of all housing units. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B25009, B25010, B19019Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows median age broken down by sex and race group. This is shown by tract, county, and state boundaries. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized to show the median age of the population. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B01001, B01002, B01002B, B01002C, B01002D, B01002E, B01002F, B01002G, B01002H, B01002I (Not all lines of ACS table B01001 are available in this feature layer.)Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows current marital status. Counts broken down by sex. This is shown by tract, county, and state boundaries. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized by the percentage of adults who are married. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Current Vintage: 2019-2023ACS Table(s): B12001Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov The United States Census Bureau's American Community Survey (ACS):About the Survey Geography & ACS Technical Documentation News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases. Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution. The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate. The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows language group of language spoken at home by age. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized to show the percent and count of population age 5+ who speak Spanish at home. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B16007Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows Hispanic or Latino origin by specific origin. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized to show the percentage of the population with Hispanic or Latino origins. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B03001Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data.   Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases. Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows household income ranges and cutoffs. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized to show the percentage of households that make less than $75,000 annually, and also shows the count of households that make less than $75,000 annually. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B19001Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows health insurance coverage sex and race by age group. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. Sums may add to more than the total, as people can be in multiple race groups (for example, Hispanic and Black) This layer is symbolized to show the count and percent of population with no health insurance coverage. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B27010, C27001B, C27001C, C27001D, C27001E, C27001F, C27001G, C27001H, C27001I (Not all lines of these tables are available in this layer.)Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows population broken down by race and Hispanic origin. This is shown by tract, county, and state boundaries. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized to show the predominant race living within an area. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B03002Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

City of Cambridge Zoning By-Law showing the extent of By-law 150-85 and 26-007.

Polygons representing land use designations in the Sarnia Official Plan. Each feature records a designation and land use category, such as Downtown or Prestige Employment, along with a status and notes. Published by troy.fox.