ECOSTRESS Swath Top of Atmosphere Calibrated Radiance Instantaneous L1B Global 70 m V003

The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) mission measures the temperature of plants to better understand how much water plants need and how they respond to stress. ECOSTRESS is attached to the International Space Station (ISS) and collects data globally between 52° N and 52° S latitudes. The ECOSTRESS Swath Top of Atmosphere Calibrated Radiance Instantaneous L1B Global 70 m (ECO_L1B_RAD) Version 2 data product provides at-sensor calibrated radiance values retrieved for five thermal infrared (TIR) bands operating between 8 and 12.5 µm. Additionally, the digital numbers (DN) for the shortwave infrared (SWIR) band are provided. The TIR bands are spatially co-registered to produce a variable spatial resolution between 70 meters (m) and 90 m at the edge of the swath. The ECO_L1B_RAD data product is provided as swath data and does not contain geolocation information. The corresponding ECO_L1B_GEO data product is required to georeference the ECO_L1B_RAD data product. The geographic coverage of acquisitions for the ECO_L1B_RAD Version 2 data product extends to areas outside of those indicated on the coverage map. The ECO_L1B_RAD Version 2 data product contains layers of radiance values for the five TIR bands, DN values for the SWIR band, associated data quality indicators, and ancillary data distributed in HDF5 format. Known Issues * Cannot perform spatial query on ECO_L1B_RAD in NASA Earthdata Search: ECO_L1B_RAD does not contain spatial attributes, so granules cannot be searched by geographic location. Users should search for ECO_L1B_RAD data products by orbit number instead. * Data acquisition gap: ECOSTRESS was launched on June 29, 2018, and moved to autonomous science operations on August 20, 2018, following a successful in-orbit checkout period. On September 29, 2018, ECOSTRESS experienced an anomaly with its primary mass storage unit (MSU). ECOSTRESS has a primary and secondary MSU (A and B). On December 5, 2018, the instrument was switched to the secondary MSU and science operations resumed. On March 14, 2019, the secondary MSU experienced a similar anomaly, temporarily halting science acquisitions. On May 15, 2019, a new data acquisition approach was implemented, and science acquisitions resumed. To optimize the new acquisition approach TIR bands 2, 4 and 5 are being downloaded. The data products are as previously, except the bands not downloaded contain fill values (L1 radiance and L2 emissivity). This approach was implemented from May 15, 2019, through April 28, 2023. * Data acquisition gap: From February 8 to February 16, 2020, an ECOSTRESS instrument issue resulted in a data anomaly that created striping in band 4 (10.5 micron). These data products have been reprocessed and are available for download. No ECOSTRESS data were acquired on February 17, 2020, due to the instrument being in SAFEHOLD. Data acquired following the anomaly have not been affected. * Missing scan data/striping features: During testing, an instrument artifact was encountered in ECOSTRESS bands 1 and 5, resulting in missing values. A machine learning algorithm has been applied to interpolate missing values. For more information on the missing scan filling techniques and outcomes, see Section 3.3.2 of the User Guide. * Scan overlap: An overlap between ECOSTRESS scans results in a clear line overlap and repeating data. Additional information is available in Section 3.2 of the User Guide. * Scan flipping: Improvements to the visualization of the data to compensate for instrument orientation are discussed in Section 3.4 of the User Guide. * Data acquisition: ECOSTRESS has now successfully returned to 5-band mode after being in 3-band mode since 2019. This feature was successfully enabled following a Data Processing Unit firmware update (version 4.1) to the payload on April 28, 2023. To better balance contiguous science data scene variables, 3-band collection is currently being interleaved with 5-band acquisitions over the orbital day/night periods. * Solar Array Obstruction: Some ECOSTRESS scenes may be affected by solar array obstructions from the International Space Station (ISS), potentially impacting data quality of obstructed pixels. The 'FieldOfViewObstruction' metadata field is included in all Version 2 products to indicate possible obstructions: * Before October 24, 2024 (orbits prior to 35724): The field is present but was not populated and does not reliably identify affected scenes. * On or after October 24, 2024 (starting with orbit 35724): The field is populated and generally accurate, except for late December 2024, when a temporary processing error may have caused false positives. * A list of scenes confirmed to be affected by obstructions is available and is recommended for verifying historical data (before October 24, 2024) and scenes from late December 2024. * The ISS native pointing information is coarse relative to ECOSTRESS pixels, so ECOSTRESS geolocation is improved through image matching with a basemap. Metadata in the L1B_GEO file shows the success of this geolocation improvement, using categorizations "best", "good", "suspect", and "poor". We recommend that users use only "best" and "good" scenes for evaluations where geolocation is important (e.g., comparison to field sites). For some scenes, this metadata is not reflected in the higher-level products (e.g., land surface temperature, evapotranspiration, etc.). While this metadata is always available in the geolocation product, to save users additional download, we have produced a summary text file that includes the geolocation quality flags for all scenes from launch to present. At a later date, all higher-level products will reflect the geolocation quality flag correctly (the field name is GeolocationAccuracyQA). *During the time period of May 15th, 2025, through July 1st, 2025, ECOSTRESS data was noisier than expected. Cycling the payload resolved the issue, but researchers should use all levels of ECOSTRESS data acquired during this time period with caution.

The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) mission measures the temperature of plants to better understand how much water plants need and how they respond to stress. ECOSTRESS is attached to the International Space Station (ISS) and collects data globally between 52° N and 52° S latitudes. The ECOSTRESS Gridded Top of Atmosphere Calibrated Radiance Instantaneous Level 1C Global 70 m (ECO_L1CG_RAD) Version 3 data product provides at-sensor calibrated radiance values retrieved for five thermal infrared (TIR) bands operating between 8 and 12.5 µm. This product is a gridded version of the ECO_L1B_RAD Version 3 data product that has been resampled by nearest neighbor, projected to a globally snapped 0.0006° grid, and repackaged as the ECO_L1CG_RAD data product. The ECO_L1CG_RAD Version 3 data product contains 19 variables distributed in HDF5 format. These include radiance values for the five TIR bands, associated data quality indicators, radiance interpolation uncertainty, surface height, view zenith angle, a preliminary cloud mask, and a water body mask. Known Issues * Solar Array Obstruction: Some ECOSTRESS scenes may be affected by solar array obstructions from the ISS, potentially impacting data quality in obstructed pixels. The 'FieldOfViewObstruction' metadata field is reliably populated and accurate for all products generated on or after October 2024, following fixes to the PGE docker configuration and updates to the L1A_RAW_PIX software. Prior to October 2024, the field was not reliably populated; a list of confirmed affected scenes was maintained and is recommended for verifying historical data. * Historical acquisition gaps and anomalies (2018–2023): Irrecoverable data loss occurred due to Mass Storage Unit (MSU) failures, resulting in permanent gaps in the observational record where no ECOSTRESS data was acquired. Other early issues, including band 4 striping (Feb 2020), 3-band TES mode limitations (May 2019–April 2023), and noisy data periods (e.g., May–July 2025), have been mitigated through reprocessing, firmware updates, and instrument recovery. Version 3 products incorporate these improvements where data exists and are unaffected by ongoing issues, but the permanent historical gaps remain, and caution is advised for time-series analyses spanning affected periods.

The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) mission measures the temperature of plants to better understand how much water plants need and how they respond to stress. ECOSTRESS is attached to the International Space Station (ISS) and collects data globally between 52° N and 52° S latitudes. The ECOSTRESS Tiled Top of Atmosphere Calibrated Radiance Instantaneous Level 1C Global 70 m (ECO_L1CT_RAD) Version 3 data product provides at-sensor calibrated radiance values retrieved for five thermal infrared (TIR) bands operating between 8 and 12.5 µm. This tiled data product is generated from the ECO_L1CG_RAD Version 3 data product using a modified version of the Military Grid Reference System (MGRS), which divides Universal Transverse Mercator (UTM) zones into square tiles that are 109.8 km by 109.8 km with a 70 meter (m) spatial resolution. The ECO_L1CT_RAD Version 3 data product contains 12 layers including radiance values for the five TIR bands, associated data quality indicators, a preliminary cloud mask, and a water body mask. Each variable is distributed as a separate Cloud Optimized GeoTIFF (COG) file. Known Issues * Solar Array Obstruction: Some ECOSTRESS scenes may be affected by solar array obstructions from the ISS, potentially impacting data quality in obstructed pixels. The 'FieldOfViewObstruction' metadata field is reliably populated and accurate for all products generated on or after October 2024, following fixes to the PGE docker configuration and updates to the L1A_RAW_PIX software. Prior to October 2024, the field was not reliably populated; a list of confirmed affected scenes was maintained and is recommended for verifying historical data. * Historical acquisition gaps and anomalies (2018–2023): Irrecoverable data loss occurred due to Mass Storage Unit (MSU) failures, resulting in permanent gaps in the observational record where no ECOSTRESS data was acquired. Other early issues, including band 4 striping (Feb 2020), 3-band TES mode limitations (May 2019–April 2023), and noisy data periods (e.g., May–July 2025), have been mitigated through reprocessing, firmware updates, and instrument recovery. Version 3 products incorporate these improvements where data exists and are unaffected by ongoing issues, but the permanent historical gaps remain, and caution is advised for time-series analyses spanning affected periods.

The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) mission measures the temperature of plants to better understand how much water plants need and how they respond to stress. ECOSTRESS is attached to the International Space Station (ISS) and collects data globally between 52° N and 52° S latitudes. The ECOSTRESS Gridded Top of Atmosphere Calibrated Radiance Instantaneous Level 1C Global 70 m (ECO_L1CG_RAD) Version 2 data product provides at-sensor calibrated radiance values retrieved for five thermal infrared (TIR) bands operating between 8 and 12.5 µm. This product is a gridded version of the ECO_L1B_RAD Version 2 data product that has been resampled by nearest neighbor, projected to a globally snapped 0.0006° grid, and repackaged as the ECO_L1CG_RAD data product. The ECO_L1CG_RAD Version 2 data product contains 12 layers distributed in an HDF5 format file containing radiance values for the five TIR bands, associated data quality indicators, and cloud and water masks. Known Issues * Data acquisition gap: ECOSTRESS was launched on June 29, 2018, and moved to autonomous science operations on August 20, 2018, following a successful in-orbit checkout period. On September 29, 2018, ECOSTRESS experienced an anomaly with its primary mass storage unit (MSU). ECOSTRESS has a primary and secondary MSU (A and B). On December 5, 2018, the instrument was switched to the secondary MSU and science operations resumed. On March 14, 2019, the secondary MSU experienced a similar anomaly, temporarily halting science acquisitions. On May 15, 2019, a new data acquisition approach was implemented, and science acquisitions resumed. To optimize the new acquisition approach TIR bands 2, 4, and 5 are being downloaded. The data products are as previously, except the bands not downloaded contain fill values (L1 radiance and L2 emissivity). This approach was implemented from May 15, 2019, through April 28, 2023. * Data acquisition gap: From February 8 to February 16, 2020, an ECOSTRESS instrument issue resulted in a data anomaly that created striping in band 4 (10.5 micron). These data products have been reprocessed and are available for download. No ECOSTRESS data were acquired on February 17, 2020, due to the instrument being in SAFEHOLD. Data acquired following the anomaly have not been affected. * Missing scan data/striping features: During testing, an instrument artifact was encountered in ECOSTRESS bands 1 and 5, resulting in missing values. A machine learning algorithm has been applied to interpolate missing values. For more information on the missing scan filling techniques and outcomes, see Section 3.3.2 of the ECO_L1B_RAD User Guide. * Scan overlap: An overlap between ECOSTRESS scans results in a clear line overlap and repeating data. Additional information is available in Section 3.2 of the ECO_L1B_RAD User Guide. * Scan flipping: Improvements to the visualization of the data to compensate for instrument orientation are discussed in Section 3.4 of the ECO_L1B_RAD User Guide. * Data acquisition: ECOSTRESS has now successfully returned to 5-band mode after being in 3-band mode since 2019. This feature was successfully enabled following a Data Processing Unit firmware update (version 4.1) to the payload on April 28, 2023. To better balance contiguous science data scene variables, 3-band collection is currently being interleaved with 5-band acquisitions over the orbital day/night periods. * Solar Array Obstruction: Some ECOSTRESS scenes may be affected by solar array obstructions from the International Space Station (ISS), potentially impacting data quality of obstructed pixels. The 'FieldOfViewObstruction' metadata field is included in all Version 2 products to indicate possible obstructions: * Before October 24, 2024 (orbits prior to 35724): The field is present but was not populated and does not reliably identify affected scenes. * On or after October 24, 2024 (starting with orbit 35724): The field is populated and generally accurate, except for late December 2024, when a temporary processing error may have caused false positives. * A list of scenes confirmed to be affected by obstructions is available and is recommended for verifying historical data (before October 24, 2024) and scenes from late December 2024. * The ISS native pointing information is coarse relative to ECOSTRESS pixels, so ECOSTRESS geolocation is improved through image matching with a basemap. Metadata in the L1B_GEO file shows the success of this geolocation improvement, using categorizations "best", "good", "suspect", and "poor". We recommend that users use only "best" and "good" scenes for evaluations where geolocation is important (e.g., comparison to field sites). For some scenes, this metadata is not reflected in the higher-level products (e.g., land surface temperature, evapotranspiration, etc.). While this metadata is always available in the geolocation product, to save users additional download, we have produced a summary text file that includes the geolocation quality flags for all scenes from launch to present. At a later date, all higher-level products will reflect the geolocation quality flag correctly (the field name is GeolocationAccuracyQA).

The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) mission measures the temperature of plants to better understand how much water plants need and how they respond to stress. ECOSTRESS is attached to the International Space Station (ISS) and collects data globally between 52° N and 52° S latitudes. The ECOSTRESS Tiled Top of Atmosphere Calibrated Radiance Instantaneous Level 1 Global 70 m (ECO_L1CT_RAD) Version 2 data product provides at-sensor calibrated radiance values retrieved for five thermal infrared (TIR) bands operating between 8 and 12.5 µm. This tiled data product is generated from the ECO_L1CG_RAD Version 2 data product using a modified version of the Military Grid Reference System (MGRS), which divides Universal Transverse Mercator (UTM) zones into square tiles that are 109.8 km by 109.8 km with a 70 meter (m) spatial resolution. Each ECOSTRESS pixel can be assumed to remain at the same location at each timestep within a tile. The ECO_L1CT_RAD Version 2 data product contains 12 layers distributed in Cloud Optimized GeoTIFF (COG) format consisting of separate files containing five TIR bands, associated data quality indicators, and cloud and water masks. Known Issues * Data acquisition gap: ECOSTRESS was launched on June 29, 2018, and moved to autonomous science operations on August 20, 2018, following a successful in-orbit checkout period. On September 29, 2018, ECOSTRESS experienced an anomaly with its primary mass storage unit (MSU). ECOSTRESS has a primary and secondary MSU (A and B). On December 5, 2018, the instrument was switched to the secondary MSU and science operations resumed. On March 14, 2019, the secondary MSU experienced a similar anomaly, temporarily halting science acquisitions. On May 15, 2019, a new data acquisition approach was implemented, and science acquisitions resumed. To optimize the new acquisition approach TIR bands 2, 4, and 5 are being downloaded. The data products are as previously, except the bands not downloaded contain fill values (L1 radiance and L2 emissivity). This approach was implemented from May 15, 2019, through April 28, 2023. * Data acquisition gap: From February 8 to February 16, 2020, an ECOSTRESS instrument issue resulted in a data anomaly that created striping in band 4 (10.5 micron). These data products have been reprocessed and are available for download. No ECOSTRESS data were acquired on February 17, 2020, due to the instrument being in SAFEHOLD. Data acquired following the anomaly have not been affected. * Missing scan data/striping features: During testing, an instrument artifact was encountered in ECOSTRESS bands 1 and 5, resulting in missing values. A machine learning algorithm has been applied to interpolate missing values. For more information on the missing scan filling techniques and outcomes, see Section 3.3.2 of the ECO_L1B_RAD User Guide. * Scan overlap: An overlap between ECOSTRESS scans results in a clear line overlap and repeating data. Additional information is available in Section 3.2 of the ECO_L1B_RAD User Guide. * Scan flipping: Improvements to the visualization of the data to compensate for instrument orientation are discussed in Section 3.4 of the ECO_L1B_RAD User Guide. * Data acquisition: ECOSTRESS has now successfully returned to 5-band mode after being in 3-band mode since 2019. This feature was successfully enabled following a Data Processing Unit firmware update (version 4.1) to the payload on April 28, 2023. To better balance contiguous science data scene variables, 3-band collection is currently being interleaved with 5-band acquisitions over the orbital day/night periods. * Solar Array Obstruction: Some ECOSTRESS scenes may be affected by solar array obstructions from the International Space Station (ISS), potentially impacting data quality of obstructed pixels. The 'FieldOfViewObstruction' metadata field is included in all Version 2 products to indicate possible obstructions: * Before October 24, 2024 (orbits prior to 35724): The field is present but was not populated and does not reliably identify affected scenes. * On or after October 24, 2024 (starting with orbit 35724): The field is populated and generally accurate, except for late December 2024, when a temporary processing error may have caused false positives. * A list of scenes confirmed to be affected by obstructions is available and is recommended for verifying historical data (before October 24, 2024) and scenes from late December 2024. * The ISS native pointing information is coarse relative to ECOSTRESS pixels, so ECOSTRESS geolocation is improved through image matching with a basemap. Metadata in the L1B_GEO file shows the success of this geolocation improvement, using categorizations "best", "good", "suspect", and "poor". We recommend that users use only "best" and "good" scenes for evaluations where geolocation is important (e.g., comparison to field sites). For some scenes, this metadata is not reflected in the higher-level products (e.g., land surface temperature, evapotranspiration, etc.). While this metadata is always available in the geolocation product, to save users additional download, we have produced a summary text file that includes the geolocation quality flags for all scenes from launch to present. At a later date, all higher-level products will reflect the geolocation quality flag correctly (the field name is GeolocationAccuracyQA). *During the time period of May 15th, 2025, through July 1st, 2025, ECOSTRESS data was noisier than expected. Cycling the payload resolved the issue, but researchers should use all levels of ECOSTRESS data acquired during this time period with caution.

The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) mission measures the temperature of plants to better understand how much water plants need and how they respond to stress. ECOSTRESS is attached to the International Space Station (ISS) and collects data globally between 52° N and 52° S latitudes. The ECOSTRESS Swath Geolocation Instantaneous Level 1B Global (ECO_L1B_GEO) Version 3 data product provides the geolocation information for the radiance values retrieved in the ECO_L1B_RAD Version 3 data product. The geolocation product gives geo-tagging to each of the radiance pixels. The geolocation processing corrects the ISS-reported ephemeris and attitude data by image matching with a global Landsat 7 orthoimagery base layer and then assigns latitude and longitude values to each of the Level 1 radiance pixels. When image matching is successful, the data are geolocated to greater than 50 meter (m) accuracy. The ECO_L1B_GEO data product is provided as swath data. The ECO_L1B_GEO data product contains 10 data variables for latitude and longitude values, solar and view geometry information, surface height, land fraction, and a preliminary cloud mask, distributed in HDF5 format. Known Issues * Solar Array Obstruction: Some ECOSTRESS scenes may be affected by solar array obstructions from the ISS, potentially impacting data quality in obstructed pixels. The 'FieldOfViewObstruction' metadata field is reliably populated and accurate for all products generated on or after October 2024, following fixes to the Product Generation Executive (PGE) docker configuration and updates to the L1A_RAW_PIX software. Prior to October 2024, the field was not reliably populated; a list of confirmed affected scenes was maintained and is recommended for verifying historical data. * Historical acquisition gaps and anomalies (2018–2023): Irrecoverable data loss occurred due to Mass Storage Unit (MSU) failures, resulting in permanent gaps in the observational record where no ECOSTRESS data was acquired. Other early issues, including band 4 striping (Feb 2020), 3-band TES mode limitations (May 2019–April 2023), and noisy data periods (e.g., May–July 2025), have been mitigated through reprocessing, firmware updates, and instrument recovery. Version 3 products incorporate these improvements where data exists and are unaffected by ongoing issues, but the permanent historical gaps remain, and caution is advised for time-series analyses spanning affected periods. * prelim_cloud_mask valid_max attribute: The valid_max attribute for prelim_cloud_mask is currently written as 0 in production files; the correct value is 1 (reflecting the field's 0–1 range: 0=clear, 1=cloudy). This is a known metadata error affecting all L1B_GEO V3 granules processed to date. The JPL science team has corrected the issue for future processing; LP DAAC will notify users when the fix takes effect and which granules are affected. Existing granules will not be reprocessed for this issue. * Geolocation accuracy: In cases where scenes were not successfully matched with the Landsat 7 orthoimagery base layer, the geolocation error is significantly larger; the worst-case geolocation error for uncorrected data is 7 kilometers (km). Within the metadata of the ECO_L1B_GEO file, if the field 'L1GEOMetadata/OrbitCorrectionPerformed' is 'True,' the data was corrected, and geolocation accuracy should be greater than 50 m. If this field is 'False,' then the data was processed without correcting the geolocation and will have up to 7 km geolocation error.