ECOSTRESS Tiled Top of Atmosphere Calibrated Radiance Instantaneous L1C Global 70 m V003

The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) mission measures the temperature of plants to better understand how much water plants need and how they respond to stress. ECOSTRESS is attached to the International Space Station (ISS) and collects data globally between 52° N and 52° S latitudes. The ECOSTRESS Gridded Top of Atmosphere Calibrated Radiance Instantaneous Level 1C Global 70 m (ECO_L1CG_RAD) Version 3 data product provides at-sensor calibrated radiance values retrieved for five thermal infrared (TIR) bands operating between 8 and 12.5 µm. This product is a gridded version of the ECO_L1B_RAD Version 3 data product that has been resampled by nearest neighbor, projected to a globally snapped 0.0006° grid, and repackaged as the ECO_L1CG_RAD data product. The ECO_L1CG_RAD Version 3 data product contains 19 variables distributed in HDF5 format. These include radiance values for the five TIR bands, associated data quality indicators, radiance interpolation uncertainty, surface height, view zenith angle, a preliminary cloud mask, and a water body mask. Known Issues * Solar Array Obstruction: Some ECOSTRESS scenes may be affected by solar array obstructions from the ISS, potentially impacting data quality in obstructed pixels. The 'FieldOfViewObstruction' metadata field is reliably populated and accurate for all products generated on or after October 2024, following fixes to the PGE docker configuration and updates to the L1A_RAW_PIX software. Prior to October 2024, the field was not reliably populated; a list of confirmed affected scenes was maintained and is recommended for verifying historical data. * Historical acquisition gaps and anomalies (2018–2023): Irrecoverable data loss occurred due to Mass Storage Unit (MSU) failures, resulting in permanent gaps in the observational record where no ECOSTRESS data was acquired. Other early issues, including band 4 striping (Feb 2020), 3-band TES mode limitations (May 2019–April 2023), and noisy data periods (e.g., May–July 2025), have been mitigated through reprocessing, firmware updates, and instrument recovery. Version 3 products incorporate these improvements where data exists and are unaffected by ongoing issues, but the permanent historical gaps remain, and caution is advised for time-series analyses spanning affected periods.

The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) mission measures the temperature of plants to better understand how much water plants need and how they respond to stress. ECOSTRESS is attached to the International Space Station (ISS) and collects data globally between 52° N and 52° S latitudes. The ECOSTRESS Tiled Top of Atmosphere Calibrated Radiance Instantaneous Level 1 Global 70 m (ECO_L1CT_RAD) Version 2 data product provides at-sensor calibrated radiance values retrieved for five thermal infrared (TIR) bands operating between 8 and 12.5 µm. This tiled data product is generated from the ECO_L1CG_RAD Version 2 data product using a modified version of the Military Grid Reference System (MGRS), which divides Universal Transverse Mercator (UTM) zones into square tiles that are 109.8 km by 109.8 km with a 70 meter (m) spatial resolution. Each ECOSTRESS pixel can be assumed to remain at the same location at each timestep within a tile. The ECO_L1CT_RAD Version 2 data product contains 12 layers distributed in Cloud Optimized GeoTIFF (COG) format consisting of separate files containing five TIR bands, associated data quality indicators, and cloud and water masks. Known Issues * Data acquisition gap: ECOSTRESS was launched on June 29, 2018, and moved to autonomous science operations on August 20, 2018, following a successful in-orbit checkout period. On September 29, 2018, ECOSTRESS experienced an anomaly with its primary mass storage unit (MSU). ECOSTRESS has a primary and secondary MSU (A and B). On December 5, 2018, the instrument was switched to the secondary MSU and science operations resumed. On March 14, 2019, the secondary MSU experienced a similar anomaly, temporarily halting science acquisitions. On May 15, 2019, a new data acquisition approach was implemented, and science acquisitions resumed. To optimize the new acquisition approach TIR bands 2, 4, and 5 are being downloaded. The data products are as previously, except the bands not downloaded contain fill values (L1 radiance and L2 emissivity). This approach was implemented from May 15, 2019, through April 28, 2023. * Data acquisition gap: From February 8 to February 16, 2020, an ECOSTRESS instrument issue resulted in a data anomaly that created striping in band 4 (10.5 micron). These data products have been reprocessed and are available for download. No ECOSTRESS data were acquired on February 17, 2020, due to the instrument being in SAFEHOLD. Data acquired following the anomaly have not been affected. * Missing scan data/striping features: During testing, an instrument artifact was encountered in ECOSTRESS bands 1 and 5, resulting in missing values. A machine learning algorithm has been applied to interpolate missing values. For more information on the missing scan filling techniques and outcomes, see Section 3.3.2 of the ECO_L1B_RAD User Guide. * Scan overlap: An overlap between ECOSTRESS scans results in a clear line overlap and repeating data. Additional information is available in Section 3.2 of the ECO_L1B_RAD User Guide. * Scan flipping: Improvements to the visualization of the data to compensate for instrument orientation are discussed in Section 3.4 of the ECO_L1B_RAD User Guide. * Data acquisition: ECOSTRESS has now successfully returned to 5-band mode after being in 3-band mode since 2019. This feature was successfully enabled following a Data Processing Unit firmware update (version 4.1) to the payload on April 28, 2023. To better balance contiguous science data scene variables, 3-band collection is currently being interleaved with 5-band acquisitions over the orbital day/night periods. * Solar Array Obstruction: Some ECOSTRESS scenes may be affected by solar array obstructions from the International Space Station (ISS), potentially impacting data quality of obstructed pixels. The 'FieldOfViewObstruction' metadata field is included in all Version 2 products to indicate possible obstructions: * Before October 24, 2024 (orbits prior to 35724): The field is present but was not populated and does not reliably identify affected scenes. * On or after October 24, 2024 (starting with orbit 35724): The field is populated and generally accurate, except for late December 2024, when a temporary processing error may have caused false positives. * A list of scenes confirmed to be affected by obstructions is available and is recommended for verifying historical data (before October 24, 2024) and scenes from late December 2024. * The ISS native pointing information is coarse relative to ECOSTRESS pixels, so ECOSTRESS geolocation is improved through image matching with a basemap. Metadata in the L1B_GEO file shows the success of this geolocation improvement, using categorizations "best", "good", "suspect", and "poor". We recommend that users use only "best" and "good" scenes for evaluations where geolocation is important (e.g., comparison to field sites). For some scenes, this metadata is not reflected in the higher-level products (e.g., land surface temperature, evapotranspiration, etc.). While this metadata is always available in the geolocation product, to save users additional download, we have produced a summary text file that includes the geolocation quality flags for all scenes from launch to present. At a later date, all higher-level products will reflect the geolocation quality flag correctly (the field name is GeolocationAccuracyQA). *During the time period of May 15th, 2025, through July 1st, 2025, ECOSTRESS data was noisier than expected. Cycling the payload resolved the issue, but researchers should use all levels of ECOSTRESS data acquired during this time period with caution.

The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) mission measures the temperature of plants to better understand how much water plants need and how they respond to stress. ECOSTRESS is attached to the International Space Station (ISS) and collects data globally between 52° N and 52° S latitudes. The ECOSTRESS Swath Top of Atmosphere Calibrated Radiance Instantaneous Level 1B Global 70 m (ECO_L1B_RAD) Version 3 data product provides at-sensor calibrated radiance values retrieved for five thermal infrared (TIR) bands operating between 8 and 12.5 µm. Additionally, digital numbers (DN) for the shortwave infrared (SWIR) band are provided; note that the SWIR focal plane has been determined to be photon-limited and deprecated. The TIR bands are spatially co-registered to produce a variable spatial resolution between 70 meters (m) and 90 m at the edge of the swath. The ECO_L1B_RAD data product is provided as swath data and does not contain geolocation information. The corresponding ECO_L1B_GEO data product is required to georeference the ECO_L1B_RAD data product. The ECO_L1B_RAD Version 3 data product contains 18 variables, including radiance values for the five TIR bands, digital number (DN) values for the SWIR band, associated data quality indicators, interpolation uncertainty values, and ancillary data distributed in HDF5 format. Known Issues * Cannot perform spatial query in NASA Earthdata Search: This product does not contain spatial bounding box attributes, so granules cannot be searched by geographic location. Users should search for this data product by orbit number instead. * Solar Array Obstruction: Some ECOSTRESS scenes may be affected by solar array obstructions from the ISS, potentially impacting data quality in obstructed pixels. The 'FieldOfViewObstruction' metadata field is reliably populated and accurate for all products generated on or after October 2024, following fixes to the Product Generation Executive (PGE) docker configuration and updates to the L1A_RAW_PIX software. Prior to October 2024, the field was not reliably populated; a list of confirmed affected scenes was maintained and is recommended for verifying historical data. * Historical acquisition gaps and anomalies (2018–2023): Irrecoverable data loss occurred due to Mass Storage Unit (MSU) failures, resulting in permanent gaps in the observational record where no ECOSTRESS data was acquired. Other early issues, including band 4 striping (Feb 2020), 3-band TES mode limitations (May 2019–April 2023), and noisy data periods (e.g., May–July 2025), have been mitigated through reprocessing, firmware updates, and instrument recovery. Version 3 products incorporate these improvements where data exists and are unaffected by ongoing issues, but the permanent historical gaps remain, and caution is advised for time-series analyses spanning affected periods.

The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) mission measures the temperature of plants to better understand how much water plants need and how they respond to stress. ECOSTRESS is attached to the International Space Station (ISS) and collects data globally between 52° N and 52° S latitudes. The ECOSTRESS Gridded Top of Atmosphere Calibrated Radiance Instantaneous Level 1C Global 70 m (ECO_L1CG_RAD) Version 2 data product provides at-sensor calibrated radiance values retrieved for five thermal infrared (TIR) bands operating between 8 and 12.5 µm. This product is a gridded version of the ECO_L1B_RAD Version 2 data product that has been resampled by nearest neighbor, projected to a globally snapped 0.0006° grid, and repackaged as the ECO_L1CG_RAD data product. The ECO_L1CG_RAD Version 2 data product contains 12 layers distributed in an HDF5 format file containing radiance values for the five TIR bands, associated data quality indicators, and cloud and water masks. Known Issues * Data acquisition gap: ECOSTRESS was launched on June 29, 2018, and moved to autonomous science operations on August 20, 2018, following a successful in-orbit checkout period. On September 29, 2018, ECOSTRESS experienced an anomaly with its primary mass storage unit (MSU). ECOSTRESS has a primary and secondary MSU (A and B). On December 5, 2018, the instrument was switched to the secondary MSU and science operations resumed. On March 14, 2019, the secondary MSU experienced a similar anomaly, temporarily halting science acquisitions. On May 15, 2019, a new data acquisition approach was implemented, and science acquisitions resumed. To optimize the new acquisition approach TIR bands 2, 4, and 5 are being downloaded. The data products are as previously, except the bands not downloaded contain fill values (L1 radiance and L2 emissivity). This approach was implemented from May 15, 2019, through April 28, 2023. * Data acquisition gap: From February 8 to February 16, 2020, an ECOSTRESS instrument issue resulted in a data anomaly that created striping in band 4 (10.5 micron). These data products have been reprocessed and are available for download. No ECOSTRESS data were acquired on February 17, 2020, due to the instrument being in SAFEHOLD. Data acquired following the anomaly have not been affected. * Missing scan data/striping features: During testing, an instrument artifact was encountered in ECOSTRESS bands 1 and 5, resulting in missing values. A machine learning algorithm has been applied to interpolate missing values. For more information on the missing scan filling techniques and outcomes, see Section 3.3.2 of the ECO_L1B_RAD User Guide. * Scan overlap: An overlap between ECOSTRESS scans results in a clear line overlap and repeating data. Additional information is available in Section 3.2 of the ECO_L1B_RAD User Guide. * Scan flipping: Improvements to the visualization of the data to compensate for instrument orientation are discussed in Section 3.4 of the ECO_L1B_RAD User Guide. * Data acquisition: ECOSTRESS has now successfully returned to 5-band mode after being in 3-band mode since 2019. This feature was successfully enabled following a Data Processing Unit firmware update (version 4.1) to the payload on April 28, 2023. To better balance contiguous science data scene variables, 3-band collection is currently being interleaved with 5-band acquisitions over the orbital day/night periods. * Solar Array Obstruction: Some ECOSTRESS scenes may be affected by solar array obstructions from the International Space Station (ISS), potentially impacting data quality of obstructed pixels. The 'FieldOfViewObstruction' metadata field is included in all Version 2 products to indicate possible obstructions: * Before October 24, 2024 (orbits prior to 35724): The field is present but was not populated and does not reliably identify affected scenes. * On or after October 24, 2024 (starting with orbit 35724): The field is populated and generally accurate, except for late December 2024, when a temporary processing error may have caused false positives. * A list of scenes confirmed to be affected by obstructions is available and is recommended for verifying historical data (before October 24, 2024) and scenes from late December 2024. * The ISS native pointing information is coarse relative to ECOSTRESS pixels, so ECOSTRESS geolocation is improved through image matching with a basemap. Metadata in the L1B_GEO file shows the success of this geolocation improvement, using categorizations "best", "good", "suspect", and "poor". We recommend that users use only "best" and "good" scenes for evaluations where geolocation is important (e.g., comparison to field sites). For some scenes, this metadata is not reflected in the higher-level products (e.g., land surface temperature, evapotranspiration, etc.). While this metadata is always available in the geolocation product, to save users additional download, we have produced a summary text file that includes the geolocation quality flags for all scenes from launch to present. At a later date, all higher-level products will reflect the geolocation quality flag correctly (the field name is GeolocationAccuracyQA).

The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) mission measures the temperature of plants to better understand how much water plants need and how they respond to stress. ECOSTRESS is attached to the International Space Station (ISS) and collects data globally between 52° N and 52° S latitudes. The ECOSTRESS Tiled Land Surface Temperature and Emissivity Instantaneous Level 2 Global 70 m (ECO_L2T_LSTE) Version 3 data product provides atmospherically corrected land surface temperature and emissivity (LST&E) values derived from the five thermal infrared (TIR) bands using the Temperature-Emissivity Separation (TES) algorithm. In addition, a Sea Surface Temperature (SST) layer is included that is valid over all water surfaces (ocean and inland water). The L2 LST&E and SST algorithms run on all pixels regardless of land, ocean, or cloud. This tiled data product is subset from the ECO_L2G_LSTE data product using a modified version of the Military Grid Reference System (MGRS) which divides Universal Transverse Mercator (UTM) zones into square tiles that are 109.8 km by 109.8 km with a 70 meter (m) spatial resolution. The ECO_L2T_LSTE Version 3 data product is provided in Cloud Optimized GeoTIFF (COG) format, and each variable is distributed as a separate COG. Each granule contains 18 variables of LST, quality control flags (QC), band emissivities (bands 1-5), band emissivity error (bands 1-5), wideband emissivity (EmisWB), SST, cloud_mask, water_mask, view_zenith, and height. Known Issues * Solar Array Obstruction: Some ECOSTRESS scenes may be affected by solar array obstructions from the ISS, potentially impacting data quality in obstructed pixels. The 'FieldOfViewObstruction' metadata field is reliably populated and accurate for all products generated on or after October 2024, following fixes to the PGE docker configuration and updates to the L1A_RAW_PIX software. Prior to October 2024, the field was not reliably populated; a list of confirmed affected scenes was maintained and is recommended for verifying historical data. * Historical acquisition gaps and anomalies (2018–2023): Irrecoverable data loss occurred due to Mass Storage Unit (MSU) failures, resulting in permanent gaps in the observational record where no ECOSTRESS data was acquired. Other early issues, including band 4 striping (Feb 2020), 3-band TES mode limitations (May 2019–April 2023), and noisy data periods (e.g., May–July 2025), have been mitigated through reprocessing, firmware updates, and instrument recovery. Version 3 products incorporate these improvements where data exists and are unaffected by ongoing issues, but the permanent historical gaps remain, and caution is advised for time-series analyses spanning affected periods. * Product formats: Version 3 discontinues swath-based (non-gridded) HDF5 products for Level 2 LST&E and Cloud outputs. Only gridded (ECO_L2G_LSTE and ECO_L2G_CLOUD in HDF5) and tiled (ECO_L2T_LSTE in Cloud-Optimized GeoTIFF) formats are available for Level 2 products. Swath-based products remain available for Level 1 products (e.g., ECO_L1B_RAD, ECO_L1B_GEO). Version 3 discontinues HDF5 products for Level 2 STARS, Level 3 Evapotranspiration, and Level 4 Evaporative Stress Index, and Water Use Efficiency outputs. Only tiled (Cloud-Optimized GeoTIFF) formats remain available for these products. Users transitioning from Version 2 should verify compatibility with the new structures. * Geolocation considerations: While geolocation is improved in Collection 3 tiled products (fixed MGRS grid), gridded products may reference legacy "GeolocationAccuracyQA" flags. Use "best" and "good" scenes for applications sensitive to precise positioning.

The ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) mission measures the temperature of plants to better understand how much water plants need and how they respond to stress. ECOSTRESS is attached to the International Space Station (ISS) and collects data globally between 52° N and 52° S latitudes. The ECOSTRESS Swath Top of Atmosphere Calibrated Radiance Instantaneous L1B Global 70 m (ECO_L1B_RAD) Version 2 data product provides at-sensor calibrated radiance values retrieved for five thermal infrared (TIR) bands operating between 8 and 12.5 µm. Additionally, the digital numbers (DN) for the shortwave infrared (SWIR) band are provided. The TIR bands are spatially co-registered to produce a variable spatial resolution between 70 meters (m) and 90 m at the edge of the swath. The ECO_L1B_RAD data product is provided as swath data and does not contain geolocation information. The corresponding ECO_L1B_GEO data product is required to georeference the ECO_L1B_RAD data product. The geographic coverage of acquisitions for the ECO_L1B_RAD Version 2 data product extends to areas outside of those indicated on the coverage map. The ECO_L1B_RAD Version 2 data product contains layers of radiance values for the five TIR bands, DN values for the SWIR band, associated data quality indicators, and ancillary data distributed in HDF5 format. Known Issues * Cannot perform spatial query on ECO_L1B_RAD in NASA Earthdata Search: ECO_L1B_RAD does not contain spatial attributes, so granules cannot be searched by geographic location. Users should search for ECO_L1B_RAD data products by orbit number instead. * Data acquisition gap: ECOSTRESS was launched on June 29, 2018, and moved to autonomous science operations on August 20, 2018, following a successful in-orbit checkout period. On September 29, 2018, ECOSTRESS experienced an anomaly with its primary mass storage unit (MSU). ECOSTRESS has a primary and secondary MSU (A and B). On December 5, 2018, the instrument was switched to the secondary MSU and science operations resumed. On March 14, 2019, the secondary MSU experienced a similar anomaly, temporarily halting science acquisitions. On May 15, 2019, a new data acquisition approach was implemented, and science acquisitions resumed. To optimize the new acquisition approach TIR bands 2, 4 and 5 are being downloaded. The data products are as previously, except the bands not downloaded contain fill values (L1 radiance and L2 emissivity). This approach was implemented from May 15, 2019, through April 28, 2023. * Data acquisition gap: From February 8 to February 16, 2020, an ECOSTRESS instrument issue resulted in a data anomaly that created striping in band 4 (10.5 micron). These data products have been reprocessed and are available for download. No ECOSTRESS data were acquired on February 17, 2020, due to the instrument being in SAFEHOLD. Data acquired following the anomaly have not been affected. * Missing scan data/striping features: During testing, an instrument artifact was encountered in ECOSTRESS bands 1 and 5, resulting in missing values. A machine learning algorithm has been applied to interpolate missing values. For more information on the missing scan filling techniques and outcomes, see Section 3.3.2 of the User Guide. * Scan overlap: An overlap between ECOSTRESS scans results in a clear line overlap and repeating data. Additional information is available in Section 3.2 of the User Guide. * Scan flipping: Improvements to the visualization of the data to compensate for instrument orientation are discussed in Section 3.4 of the User Guide. * Data acquisition: ECOSTRESS has now successfully returned to 5-band mode after being in 3-band mode since 2019. This feature was successfully enabled following a Data Processing Unit firmware update (version 4.1) to the payload on April 28, 2023. To better balance contiguous science data scene variables, 3-band collection is currently being interleaved with 5-band acquisitions over the orbital day/night periods. * Solar Array Obstruction: Some ECOSTRESS scenes may be affected by solar array obstructions from the International Space Station (ISS), potentially impacting data quality of obstructed pixels. The 'FieldOfViewObstruction' metadata field is included in all Version 2 products to indicate possible obstructions: * Before October 24, 2024 (orbits prior to 35724): The field is present but was not populated and does not reliably identify affected scenes. * On or after October 24, 2024 (starting with orbit 35724): The field is populated and generally accurate, except for late December 2024, when a temporary processing error may have caused false positives. * A list of scenes confirmed to be affected by obstructions is available and is recommended for verifying historical data (before October 24, 2024) and scenes from late December 2024. * The ISS native pointing information is coarse relative to ECOSTRESS pixels, so ECOSTRESS geolocation is improved through image matching with a basemap. Metadata in the L1B_GEO file shows the success of this geolocation improvement, using categorizations "best", "good", "suspect", and "poor". We recommend that users use only "best" and "good" scenes for evaluations where geolocation is important (e.g., comparison to field sites). For some scenes, this metadata is not reflected in the higher-level products (e.g., land surface temperature, evapotranspiration, etc.). While this metadata is always available in the geolocation product, to save users additional download, we have produced a summary text file that includes the geolocation quality flags for all scenes from launch to present. At a later date, all higher-level products will reflect the geolocation quality flag correctly (the field name is GeolocationAccuracyQA). *During the time period of May 15th, 2025, through July 1st, 2025, ECOSTRESS data was noisier than expected. Cycling the payload resolved the issue, but researchers should use all levels of ECOSTRESS data acquired during this time period with caution.