Society data

Alaska Native Regional Corporations (ANRC), Tribal Subdivisions, Federal American Indian Reservations, Off-Reservation Trust Lands (ORTL), State American Indian Reservations, Hawaiian Home Lands (HHL), Alaska Native Village Statistical Areas (ANVSA), Oklahoma Tribal Statistical Areas (OTSA), State Designated Tribal Statistical Areas (SDTSA), Tribal Designated Statistical Areas (TDSA), American Indian Joint-Use Areas (AIJUA); January 1, 2020 vintage

Alaska Native Regional Corporations (ANRC), Tribal Subdivisions, Federal American Indian Reservations, Off-Reservation Trust Lands (ORTL), State American Indian Reservations, Hawaiian Home Lands (HHL), Alaska Native Village Statistical Areas (ANVSA), Oklahoma Tribal Statistical Areas (OTSA), State Designated Tribal Statistical Areas (SDTSA), Tribal Designated Statistical Areas (TDSA), American Indian Joint-Use Areas (AIJUA); January 1, 2020 vintage

Alaska Native Regional Corporations (ANRC), Tribal Subdivisions, Federal American Indian Reservations, Off-Reservation Trust Lands (ORTL), State American Indian Reservations, Hawaiian Home Lands (HHL), Alaska Native Village Statistical Areas (ANVSA), Oklahoma Tribal Statistical Areas (OTSA), State Designated Tribal Statistical Areas (SDTSA), Tribal Designated Statistical Areas (TDSA), American Indian Joint-Use Areas (AIJUA); January 1, 2020 vintage

Alaska Native Regional Corporations (ANRC), Tribal Subdivisions, Federal American Indian Reservations, Off-Reservation Trust Lands (ORTL), State American Indian Reservations, Hawaiian Home Lands (HHL), Alaska Native Village Statistical Areas (ANVSA), Oklahoma Tribal Statistical Areas (OTSA), State Designated Tribal Statistical Areas (SDTSA), Tribal Designated Statistical Areas (TDSA), American Indian Joint-Use Areas (AIJUA); January 1, 2020 vintage

Alaska Native Regional Corporations (ANRC), Tribal Subdivisions, Federal American Indian Reservations, Off-Reservation Trust Lands (ORTL), State American Indian Reservations, Hawaiian Home Lands (HHL), Alaska Native Village Statistical Areas (ANVSA), Oklahoma Tribal Statistical Areas (OTSA), State Designated Tribal Statistical Areas (SDTSA), Tribal Designated Statistical Areas (TDSA), American Indian Joint-Use Areas (AIJUA); January 1, 2020 vintage

Alaska Native Regional Corporations (ANRC), Tribal Subdivisions, Federal American Indian Reservations, Off-Reservation Trust Lands (ORTL), State American Indian Reservations, Hawaiian Home Lands (HHL), Alaska Native Village Statistical Areas (ANVSA), Oklahoma Tribal Statistical Areas (OTSA), State Designated Tribal Statistical Areas (SDTSA), Tribal Designated Statistical Areas (TDSA), American Indian Joint-Use Areas (AIJUA); January 1, 2020 vintage

Alaska Native Regional Corporations (ANRC), Tribal Subdivisions, Federal American Indian Reservations, Off-Reservation Trust Lands (ORTL), State American Indian Reservations, Hawaiian Home Lands (HHL), Alaska Native Village Statistical Areas (ANVSA), Oklahoma Tribal Statistical Areas (OTSA), State Designated Tribal Statistical Areas (SDTSA), Tribal Designated Statistical Areas (TDSA), American Indian Joint-Use Areas (AIJUA); January 1, 2020 vintage

Alaska Native Regional Corporations (ANRC), Tribal Subdivisions, Federal American Indian Reservations, Off-Reservation Trust Lands (ORTL), State American Indian Reservations, Hawaiian Home Lands (HHL), Alaska Native Village Statistical Areas (ANVSA), Oklahoma Tribal Statistical Areas (OTSA), State Designated Tribal Statistical Areas (SDTSA), Tribal Designated Statistical Areas (TDSA), American Indian Joint-Use Areas (AIJUA); January 1, 2020 vintage

Alaska Native Regional Corporations (ANRC), Tribal Subdivisions, Federal American Indian Reservations, Off-Reservation Trust Lands (ORTL), State American Indian Reservations, Hawaiian Home Lands (HHL), Alaska Native Village Statistical Areas (ANVSA), Oklahoma Tribal Statistical Areas (OTSA), State Designated Tribal Statistical Areas (SDTSA), Tribal Designated Statistical Areas (TDSA), American Indian Joint-Use Areas (AIJUA); January 1, 2020 vintage

Alaska Native Regional Corporations (ANRC), Tribal Subdivisions, Federal American Indian Reservations, Off-Reservation Trust Lands (ORTL), State American Indian Reservations, Hawaiian Home Lands (HHL), Alaska Native Village Statistical Areas (ANVSA), Oklahoma Tribal Statistical Areas (OTSA), State Designated Tribal Statistical Areas (SDTSA), Tribal Designated Statistical Areas (TDSA), American Indian Joint-Use Areas (AIJUA); January 1, 2020 vintage

Data provided here are from the DC's 311 service request center. They represent all service requests such as abandoned automobiles, parking meter repair and bulk trash pickup. Requests are received by the Office of Unified Communications (OUC) through the Mayor's Call Center (311), citizens web intake at 311.dc.gov, electronic and US mail service or via other methods of communication. The Office of Unified Communications (OUC) oversees the designated call center for all 311 calls and for all District 911 calls. Please also visit the DC 311 Service Request Map which allows the public to see service requests in the last 30 days. Users can view requests by Ward within charts. Just set the area filter to select service requests. Click on a service request to view details.

Point locations of primary and secondary schools in Kenya, published by Orion. Each point represents a school with attributes including name, level, status, county, district, zone, sub-county, ward, and coordinates. The dataset covers Kenya and includes 37,930 features.

Metropolitan and Micropolitan Statistical Areas and Related Statistical Areas: Metropolitan NECTAs, Micropolitan NECTAs, Combined Statistical Areas, Metropolitan Statistical Areas, Micropolitan Statistical Areas; January 1, 2015 vintage; Generalized

Alaska Native Regional Corporations (ANRC), American Indian Reservations (AIR), Hawaiian Home Lands (HHL), Alaska Native Village Statistical Areas (ANVSA), Oklahoma Tribal Statistical Areas (OTSA), State Designated Tribal Statistical Areas (SDTSA), Tribal Designated Statistical Areas (TDSA), American Indian Joint-Use Areas (AIJUA); January 1, 2015 vintage; Generalized

Polygon features representing tribal statistical areas, published by the US Census Bureau. Each feature includes a name, land and water area, and population and housing counts, with examples such as New Stuyahok, Portage Creek, and Togiak in Alaska.

Polygon features representing American Indian reservations and/or off-reservation trust lands, published by the US Census Bureau. Each feature includes a name, land and water area, and population and housing counts.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows youth (age 16-19) school enrollment and employment status. This is shown by tract, county, and state boundaries. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. Estimates here for 'disconnected youth' differ from estimates of 'idle youth' on Census Bureau's website because idle youth includes those unemployed (actively looking for work).  This layer is symbolized by the percentage of youth who were disconnected. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B14005Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases. Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows education level for adults 25+. Counts broken down by sex. This is shown by tract, county, and state boundaries. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized by the percentage of adults (25+) who were not high school graduates. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B15002Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Visão geral Este serviço apresenta a distribuição do Índice de Desenvolvimento Social (IDS) por bairro, com atributos associados à caracterização territorial e social das áreas urbanas para o ano 2000. O conteúdo reúne informações de bairros e suas referências administrativas, apoiando a leitura espacial das condições sociais em escala local. Conteúdo da camada Índice de Desenvolvimento Social por bairro: geometria de bairros com indicadores sociais agregados, incluindo o IDS e componentes relacionados a saneamento, escolaridade e renda. Identificação territorial: campos de apoio para vínculo com bairro, Região Administrativa, Região de Planejamento, Área de Planejamento e Superintendência, facilitando consultas e análises por recorte administrativo. Uso e aplicações Análise espacial de desigualdades sociais em nível de bairro. Leitura integrada de condições de saneamento, educação e renda. Apoio a diagnósticos territoriais, planejamento urbano e políticas públicas.

Alaska Native Regional Corporations (ANRC), Tribal Subdivisions, Federal American Indian Reservations, Off-Reservation Trust Lands (ORTL), State American Indian Reservations, Hawaiian Home Lands (HHL), Alaska Native Village Statistical Areas (ANVSA), Oklahoma Tribal Statistical Areas (OTSA), State Designated Tribal Statistical Areas (SDTSA), Tribal Designated Statistical Areas (TDSA), American Indian Joint-Use Areas (AIJUA); January 1, 2020 vintage

Alaska Native Regional Corporations (ANRC), American Indian Reservations (AIR), Hawaiian Home Lands (HHL), Alaska Native Village Statistical Areas (ANVSA), Oklahoma Tribal Statistical Areas (OTSA), State Designated Tribal Statistical Areas (SDTSA), Tribal Designated Statistical Areas (TDSA), American Indian Joint-Use Areas (AIJUA); January 1, 2022 vintage; Generalized

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows education level for adults (25+) by veteran status. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized to show the percent of veteran civilians age 25+ who have a bachelor's degree or higher as their highest education level. The size of the symbols represent the count of veteran civilians age 25+ with a bachelor's degree or higher. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B21003Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters).    The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Alaska Native Regional Corporations (ANRC), American Indian Reservations (AIR), Hawaiian Home Lands (HHL), Alaska Native Village Statistical Areas (ANVSA), Oklahoma Tribal Statistical Areas (OTSA), State Designated Tribal Statistical Areas (SDTSA), Tribal Designated Statistical Areas (TDSA), American Indian Joint-Use Areas (AIJUA); January 1, 2015 vintage; Generalized

Alaska Native Regional Corporations (ANRC), American Indian Reservations (AIR), Hawaiian Home Lands (HHL), Alaska Native Village Statistical Areas (ANVSA), Oklahoma Tribal Statistical Areas (OTSA), State Designated Tribal Statistical Areas (SDTSA), Tribal Designated Statistical Areas (TDSA), American Indian Joint-Use Areas (AIJUA); January 1, 2015 vintage; Generalized

Alaska Native Regional Corporations (ANRC), Tribal Subdivisions, Federal American Indian Reservations, Off-Reservation Trust Lands (ORTL), State American Indian Reservations, Hawaiian Home Lands (HHL), Alaska Native Village Statistical Areas (ANVSA), Oklahoma Tribal Statistical Areas (OTSA), State Designated Tribal Statistical Areas (SDTSA), Tribal Designated Statistical Areas (TDSA), American Indian Joint-Use Areas (AIJUA); January 1, 2020 vintage

Alaska Native Regional Corporations (ANRC), Tribal Subdivisions, Federal American Indian Reservations, Off-Reservation Trust Lands (ORTL), State American Indian Reservations, Hawaiian Home Lands (HHL), Alaska Native Village Statistical Areas (ANVSA), Oklahoma Tribal Statistical Areas (OTSA), State Designated Tribal Statistical Areas (SDTSA), Tribal Designated Statistical Areas (TDSA), American Indian Joint-Use Areas (AIJUA); January 1, 2020 vintage

Alaska Native Regional Corporations (ANRC), American Indian Reservations (AIR), Hawaiian Home Lands (HHL), Alaska Native Village Statistical Areas (ANVSA), Oklahoma Tribal Statistical Areas (OTSA), State Designated Tribal Statistical Areas (SDTSA), Tribal Designated Statistical Areas (TDSA), American Indian Joint-Use Areas (AIJUA); January 1, 2015 vintage; Generalized

Alaska Native Regional Corporations (ANRC), American Indian Reservations (AIR), Hawaiian Home Lands (HHL), Alaska Native Village Statistical Areas (ANVSA), Oklahoma Tribal Statistical Areas (OTSA), State Designated Tribal Statistical Areas (SDTSA), Tribal Designated Statistical Areas (TDSA), American Indian Joint-Use Areas (AIJUA); January 1, 2015 vintage; Generalized

This dataset provides information about the number of programs that have received Agency Review funding; how many of those programs had defined measurable outcome goals (DMOG) specified in the agencies funding request applications; and how many programs achieved their DMOG. The Agency Review process was developed to distribute human services funds to non-profit agencies. Agency Review funds come from the City of Tempe General Revenue Fund, Federal Community Development Block Grants, and water utility customer donations through Tempe’s Help to Others. This page provides data for the Human Services Grant performance measure. This dataset provides information about the number of programs that have received Agency Review funding; how many of those programs had defined measurable outcome goals (DMOG) specified in the agencies funding request applications; and how many programs achieved their DMOG. The performance measure dashboard is available at 3.10 Human Services Grants   Data Dictionary   Additional Information   Source: e-CImpact Contact:  Octavia Harris Contact E-Mail: Octavia_Harris@tempe.gov Data Source Type:  Excel Preparation Method:  Data downloaded from e-CImpact, then compiled in spreadsheet to establish yes/no fields for aggregate calculations by population served Publish Frequency:  Annual Publish Method: Manual

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows poverty status by age group. This is shown by tract, county, and state boundaries. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. Poverty status is based on income in past 12 months of survey.  This layer is symbolized to show the percentage of the population whose income falls below the Federal poverty line. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B17020, C17002Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the U.S. Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all U.S. states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows youth (age 16-19) school enrollment and employment status. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. Estimates here for 'disconnected youth' differ from estimates of 'idle youth' on Census Bureau's website because idle youth includes those unemployed (actively looking for work).  This layer is symbolized by the count of total youth and the percentage of youth who were disconnected. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B14005Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters).  The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Alaska Native Regional Corporations (ANRC), Tribal Subdivisions, Federal American Indian Reservations, Off-Reservation Trust Lands (ORTL), State American Indian Reservations, Hawaiian Home Lands (HHL), Alaska Native Village Statistical Areas (ANVSA), Oklahoma Tribal Statistical Areas (OTSA), State Designated Tribal Statistical Areas (SDTSA), Tribal Designated Statistical Areas (TDSA), American Indian Joint-Use Areas (AIJUA); January 1, 2020 vintage

This dataset comes from the Annual Community Survey questions that relate to this performance measure, if they answered "Yes" to being a victim of crime in the past 6 months: “Were the police informed that your household had been burglarized, or did they find out about this incident in any way?” and "Were the police informed that you were robbed, physically assaulted, or sexually assaulted, or did they find out about this incident in any way?" Respondents are asked to provide their answer as “Yes” or “No” (without “don’t know” as an option). The survey is mailed to a random sample of households in the City of Tempe and has a 95% confidence level. This page provides data for the Victim Not Reporting Crime to Police performance measure.  The performance measure dashboard is available at 1.06 Crime Reporting   Data Dictionary   Additional Information   Source: Community Attitude Survey Contact:  Wydale Holmes Contact E-Mail: Wydale_Holmes@tempe.gov Data Source Type:  CSV Preparation Method:  Data received from vendor and entered into CSV Publish Frequency:  Annual Publish Method: Manual

Metropolitan and Micropolitan Statistical Areas and Related Statistical Areas: Metropolitan NECTAs, Micropolitan NECTAs, Combined Statistical Areas, Metropolitan Statistical Areas, Micropolitan Statistical Areas; January 1, 2015 vintage; Generalized

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows children by age group by parents' labor force participation. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized to show the count and percent of children with no available (residential) parent in the labor force.  To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B23008Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Alaska Native Regional Corporations (ANRC), Tribal Subdivisions, Federal American Indian Reservations, Off-Reservation Trust Lands (ORTL), State American Indian Reservations, Hawaiian Home Lands (HHL), Alaska Native Village Statistical Areas (ANVSA), Oklahoma Tribal Statistical Areas (OTSA), State Designated Tribal Statistical Areas (SDTSA), Tribal Designated Statistical Areas (TDSA), American Indian Joint-Use Areas (AIJUA); January 1, 2020 vintage