Togo GIS data

geoBoundaries ADM1 boundaries for Togo: 5 units, representing 2017. Source: OpenStreetMap, Wambacher.

geoBoundaries ADM0 boundaries for Togo: 1 units, representing 2017. Source: OpenStreetMap, Wambacher. Open Data Commons Open Database License 1.0

This GeoTIFF file contains 12 bands presenting the school age population for Togo in 2020. It was constructed using constrained UN-adjusted spatialized age and sex population estimates for 2020 by WorldPop, by applying the methodology published by IIEP-UNESCO (2021). The bands contain information for Female, Male, and Total, for Pre-primary, Primary, Lower Secondary, and Upper secondary, reconstructed from single years of age using ISCED information on starting age and duration included in UIS. The correspondence is included below: * Band 1: Pre-primary Female * Band 2: Pre-primary Male * Band 3: Pre-primary Total * Band 4: Primary Female * Band 5: Primary Male * Band 6: Primary Total * Band 7: Lower secondary Female * Band 8: Lower secondary Male * Band 9: Lower secondary Total * Band 10: Upper secondary Female * Band 11: Upper secondary Male * Band 12: Upper secondary Total The boundaries used for the clipping of the resulting calculations came from the United Nations Second Administrative Level Boundary program. Disclaimer: The designations employed and the presentation of the material in this publication do not imply the expression of any opinion whatsoever on the part of UNESCO or IIEP concerning the legal status of any country, territory, city or area, or of its authorities, or concerning the delimitation of its frontiers or boundaries. UNESCO or IIEP are not responsible for the use given to this information.

Open and free data for assessing the human presence on the planet. The Global Human Settlement Layer (GHSL) project produces global spatial information, evidence-based analytics, and knowledge describing the human presence on the planet. The GHSL relies on the design and implementation of spatial data processing technologies that allow automatic data analytics and information extraction from large amounts of heterogeneous geospatial data including global, fine-scale satellite image data streams, census data, and crowd sourced or volunteered geographic information sources. The JRC, together with the Directorate-General for Regional and Urban Policy (DG REGIO) and Directorate-General for Defence Industry and Space (DG DEFIS) are working towards a regular and operational monitoring of global built-up and population based on the processing of Sentinel Earth Observation data produced by European Copernicus space program. In addition, the EU Agency for the Space Programme (EUSPA) undertakes activities related to user uptake of data, information and services.

This dataset contains the following administrative boundaries: ADM0, ADM1, ADM2. Produced and maintained since 2017, the geoBoundaries Global Database of Political Administrative Boundaries Database www.geoboundaries.org is an open license, standardized resource of boundaries (i.e., state, county) for every country in the world.

A 100 m spatial resolution geotiff of motorised travel time in seconds to nearest health facility in Togo. The data was generated using the Child Poverty and Access to Services (CPAS) software (10.5281/zenodo.4638563) and was created as part of the CPAS project within the Data for Children Collaborative. The travel time is calculated assuming driving speeds of local public transport options on all-weather roads/asphalt roads and walking speeds on all other roads, tracks, paths and land cover types. A full description is available here a video description of the data is also available here Projection system is: GCS_WGS_1984 EPSG 4326 for all

This dataset provides detailed information on road surfaces from OpenStreetMap (OSM), distinguishing between **paved** and **unpaved** roads across the region. Surface classification is derived using a hybrid deep learning approach. For methodological details, see: http://arxiv.org/abs/2410.19874 Recently, we also published a new country-level dataset based on PlanetScope satellite imagery with near-complete coverage of all arterial roads. It is available on HDX under the name Togo **Planet** Road Surface. The corresponding paper is available at: https://arxiv.org/abs/2512.04092 Road Surface Statistics Approximately 0.0906 million km of roads are mapped in OSM in this region. Based on AI-derived estimates: - Paved roads: 0.0057 million km (6.3081%) - Unpaved roads: 0.0348 million km (38.4045%) About 0.0501 million km (55.2875%) of road surface information is missing in OSM. To reduce this gap, the Mapillary-derived road surface dataset provides an additional 0.0003 million km (0.5286%) of the missing surface information. Intended Use This dataset supports transportation planning, infrastructure analysis, climate emissions assessment, and GIS applications. AI Features - **pred_class**: Model-predicted surface class ("paved" or "unpaved") - **pred_label**: Binary label (0 = paved, 1 = unpaved) - **osm_surface_class**: Surface classification derived from OSM tags - **combined_surface_osm_priority**: Combined classification prioritizing OSM - **combined_surface_DL_priority**: Combined classification prioritizing DL prediction - **n_of_predictions_used**: Number of predictions used for estimation - **predicted_length**: Predicted length based on DL estimation (meters) - **DL_mean_timestamp**: Mean timestamp of predictions used OSM Attributes - **name** - **name:en** - **name:* (local language)** - **highway** - **surface** - **smoothness** - **width** - **lanes** - **oneway** - **bridge** - **layer** - **source** Urban Classification Attributes - **continent** - **country_iso_a2** - **urban** (0 = rural, 1 = urban) - **urban_area** - **osm_id** - **osm_type** Data Sources The dataset originates from OpenStreetMap (OSM) and is augmented with deep learning predictions based on Mapillary street-level imagery, combined with the GHSU Global Human Settlement Urban Layer 2019 and AFRICAPOLIS 2020 urban layer. More HeiGIT datasets: https://data.humdata.org/organization/heidelberg-institute-for-geoinformation-technology More information: https://heigit.org/ Contact: communications@heigit.org

Togo administrative level 0-3 boundaries (COD-AB) dataset version 02. This dataset is structured into 3 levels: - Admin 1: 5 Region - Admin 2: 40 Prefecture - Admin 3: 373 Dates associated with this dataset: - 30 October 2025: dataset reviewed for accuracy and completeness - 07 January 2021: valid for use by the humanitarian community - 12 January 2020: last edit to the dataset before publishing - 12 January 2020: boundaries created by the source Contributed by OCHA West and Central Africa (ROWCA). Quality assured, configured, and published by OCHA Field Information Services (FIS) and HDX. Part of the dataset: Global Subnational Administrative Boundaries

This dataset shows the list of operating health facilities. Attributes included: Name,Nature of Facility, Activities, Lat, Long

The International Best Track Archive for Climate Stewardship (IBTrACS) project is the most complete global collection of tropical cyclones available. It merges recent and historical tropical cyclone data from multiple agencies to create a unified, publicly available, best-track dataset that improves inter-agency comparisons. Fields available: SID: A unique storm identifier (SID) assigned by IBTrACS algorithm. ISO_TIME: Time of the observation in ISO format (YYYY-MM-DD hh:mm:ss) BASIN: Basin of the current storm position SUBBASIN: Sub-basin of the current storm position NATURE: Type of storm (a combination of the various types from the available sources) NUMBER: Number of the storm for the year (restarts at 1 for each year LAT: Mean position - latitude (a combination of the available positions) LON: Mean position - longitude (a combination of the available positions) WMO_WIND: Maximum sustained wind speed assigned by the responsible WMO agency WMO_PRES: Minimum central pressure assigned by the responsible WMO agency.

Education facilities: schools, kindergartens, colleges, and universities tagged via `amenity` or `building`. Useful for school-access mapping, education planning, and resource allocation. Coverage reflects where volunteer mappers have been active. Urban areas are usually well represented, remote areas may be sparse. Cross-check critical decisions with local field knowledge. - Source: OpenStreetMap, a free, collaborative world map - Tags: amenity, building - Part of the country exports on HDX by HOT

Railway lines and stations tagged `railway=*`: rail lines, tram tracks, and stations. Useful for transport accessibility analysis and basemap context. Coverage reflects where volunteer mappers have been active. Urban areas are usually well represented, remote areas may be sparse. Cross-check critical decisions with local field knowledge. - Source: OpenStreetMap, a free, collaborative world map - Tags: railway - Part of the country exports on HDX by HOT

Water features across the area: rivers, streams, canals, lakes, ponds, and water bodies tagged with `waterway`, `water`, or `natural=water`. Useful for flood-risk modelling, watershed analysis, and environmental basemap context. Coverage reflects where volunteer mappers have been active. Urban areas are usually well represented, remote areas may be sparse. Cross-check critical decisions with local field knowledge. - Source: OpenStreetMap, a free, collaborative world map - Tags: waterway, water, natural - Part of the country exports on HDX by HOT

Airports and aviation infrastructure: airports, heliports, helipads, runways, terminals, and emergency landing sites tagged via `aeroway`, `building`, or `emergency`. Useful for logistics, evacuation routing, and aerial-response planning. Coverage reflects where volunteer mappers have been active. Urban areas are usually well represented, remote areas may be sparse. Cross-check critical decisions with local field knowledge. - Source: OpenStreetMap, a free, collaborative world map - Tags: aeroway, building, emergency - Part of the country exports on HDX by HOT

Points of interest: public-facing amenities, shops, tourist attractions, and landmarks tagged via `amenity`, `shop`, `tourism`, or `man_made`. Useful for general POI reference, urban analysis, and basemap detail. Coverage reflects where volunteer mappers have been active. Urban areas are usually well represented, remote areas may be sparse. Cross-check critical decisions with local field knowledge. - Source: OpenStreetMap, a free, collaborative world map - Tags: amenity, shop, tourism, man_made - Part of the country exports on HDX by HOT

Sea ports, harbours and ferry terminals. Useful for maritime logistics, supply-chain analysis, and coastal access planning. Coverage reflects where volunteer mappers have been active. Urban areas are usually well represented, remote areas may be sparse. Cross-check critical decisions with local field knowledge. - Source: OpenStreetMap, a free, collaborative world map - Tags: industrial=port, harbour, port, amenity=ferry_terminal, building=ferry_terminal - Part of the country exports on HDX by HOT

Settlements and residential areas: named cities, towns, villages, suburbs, and residential land (`place=*` and `landuse=residential`). Useful for demographic context, settlement-level targeting, and population analysis. Coverage reflects where volunteer mappers have been active. Urban areas are usually well represented, remote areas may be sparse. Cross-check critical decisions with local field knowledge. - Source: OpenStreetMap, a free, collaborative world map - Tags: place, landuse - Part of the country exports on HDX by HOT

Building footprints across the area: every feature tagged `building=*`, from residential homes to hospitals, schools, and places of worship. Useful for population estimation, damage assessment, and urban planning. Coverage reflects where volunteer mappers have been active. Urban areas are usually well represented, remote areas may be sparse. Cross-check critical decisions with local field knowledge. - Source: OpenStreetMap, a free, collaborative world map - Tags: building - Part of the country exports on HDX by HOT

Health facilities: hospitals, clinics, pharmacies, doctors, and dentists tagged via `amenity` or `healthcare`. Useful for service-access analysis, emergency response, and healthcare gap mapping. Coverage reflects where volunteer mappers have been active. Urban areas are usually well represented, remote areas may be sparse. Cross-check critical decisions with local field knowledge. - Source: OpenStreetMap, a free, collaborative world map - Tags: amenity, healthcare - Part of the country exports on HDX by HOT

Financial services: banks, ATMs, post offices, money transfer agents, and microfinance branches tagged via `amenity`. Useful for financial-inclusion mapping, cash-distribution planning, and economic analysis. Coverage reflects where volunteer mappers have been active. Urban areas are usually well represented, remote areas may be sparse. Cross-check critical decisions with local field knowledge. - Source: OpenStreetMap, a free, collaborative world map - Tags: amenity - Part of the country exports on HDX by HOT

Cultural and historic places: museums, galleries, theatres, places of worship, monuments, and historic sites tagged via `tourism`, `amenity`, `historic`, or `heritage`. Useful for heritage protection, cultural mapping, and tourism context. Coverage reflects where volunteer mappers have been active. Urban areas are usually well represented, remote areas may be sparse. Cross-check critical decisions with local field knowledge. - Source: OpenStreetMap, a free, collaborative world map - Tags: tourism, amenity, historic, heritage - Part of the country exports on HDX by HOT

Road network across the area tagged `highway=*`: motorways, residential streets, service roads, footways, and trails. Useful for routing, accessibility analysis, and evacuation planning. Coverage reflects where volunteer mappers have been active. Urban areas are usually well represented, remote areas may be sparse. Cross-check critical decisions with local field knowledge. - Source: OpenStreetMap, a free, collaborative world map - Tags: highway - Part of the country exports on HDX by HOT

Fraction of Absorbed Photosynthetically Active Radiation (FAPAR) is a biophysical dimensionless quantity (its values range from 0/no absorption to 1/total absorption) used to assess the greenness and health of vegetation. FAPAR anomalies can be used as an indicator to detect and monitor the impacts of agricultural drought on the growth and productivity of vegetation. The data is presented in 10-day time composite of the Visible Infrared Imaging Radiometer Suite (VIIRS).

GLIDEnumbers are GLobal unique IDEntifiers for Disasters. Each disaster is registered in a record that contains a GLIDEnumber that uniquely identifies it and allows information to be interoperable across multiple disaster information sources, both structured and textual. Accessing disaster information can be a time consuming and laborious task. Not only is data scattered but frequently identification of the disaster can be confusing in countries with many disaster events and across borders. To address both of these issues, Asian Disaster Reduction Center (ADRC) proposed a globally common Unique ID code for disasters. Among the institutions using actively GLIDEnumbers are UN-OCHA (ReliefWeb, FSCC, HDX), UNDRR, UNDP, WMO, IFRC, FAO, the European Commission and the Centre for Research on the Epidemiology of Disasters (CRED), among many others. Country datasets are only produced for countries with at least one GLIDE event since 1 January 2022. The global dataset contains all events available from the GLIDE API, including those not assigned to a country.

Accessibility to major cities dataset is modeled as raster-based travel time/cost analysis, computed for the largest cities (>56k habitants) in the country. Lome - 2,173,800, Kara - 115,400, Sokode - 109,200, Kpalime - 89,700, Atakpame - 81,100, Dapaong - 69,900, Tsevie - 56,200. This 500m resolution raster dataset is part of FAO's Hand-in-Hand Initiative, Geographical Information Systems - Multicriteria Decision Analysis (GIS-MCDA) aimed at the identification of value chain infrastructure sites (or optimal location). **Data publication:** 2023-01-09 **Contact points:** Metadata Contact: [FAO-Data](mailto:fao-data@fao.org) Resource Contact: [Dariia Nesterenko](mailto:dariia.nesterenko@fao.org) **Data lineage:** lineage statement Produced using 1. OpenStreetMap data for roads, railways, and rivers. 2. UN Map country border. 3. The HydroSHEDS 15' resolution GRID for the DEM. 4. GHSL - Global Human Settlement Layer. 5. For the city population **Resource constraints:** This work is made available under the Creative Commons Attribution 4.0 International license (CC-BY 4.0) **Online resources:** Zipped TIF raster file for Accessibility: Travel Time-Cost to Major Cities (Togo - ~ 500 m)

Accessibility to ports dataset is modeled as raster-based travel time/cost analysis. The following ports are included: . The model travel time/cost from/to ports is defined for major maritime ports only - Port of Kpeme, Port of Lome. This 500m resolution raster dataset is part of FAO's Hand-in-Hand Initiative, Geographical Information Systems - Multicriteria Decision Analysis (GIS-MCDA) aimed at the identification of value chain infrastructure sites (optimal location). **Data publication:** 2022-12-23 **Contact points:** Metadata Contact: [FAO-Data](mailto:fao-data@fao.org) Resource Contact: [Dariia Nesterenko](mailto:dariia.nesterenko@fao.org) **Data lineage:** lineage statement Produced using 1. OpenStreetMap data for roads, railways, and rivers. 2. UN Map country border. 3. The HydroSHEDS 15' resolution GRID for the DEM. 4. For ports **Resource constraints:** This work is made available under the Creative Commons Attribution 4.0 International license (CC-BY 4.0) **Online resources:** Zipped TIF raster file for Accessibility: Travel Time-Cost to Major Maritime Ports (Togo - ~ 500m)

Accessibility to regional cities dataset is modeled as a raster-based travel time/cost analysis, computed for the major regional cities (>47k habitants) less than 200 km from the border. The following cities are included: City - Population Cotonou - 679,012, Porto-Novo - 264,320, Ho - 104,532, Djougou - 94,773, Bohicon - 93,744, Hohoe - 73,641, Tenkodogo - 61,936, Bawku - 61,151, Natitingou - 53,284, Yendi - 51,727, Bolgatanga - 49,162, Lokossa 47,246. This 500m resolution raster dataset is part of FAO's Hand-in-Hand Initiative, Geographical Information Systems - Multicriteria Decision Analysis (GIS-MCDA) aimed at the identification of value chain infrastructure sites (or optimal location). **Data publication:** 2022-04-28 **Contact points:** Metadata Contact: [FAO-Data](mailto:fao-data@fao.org) Resource Contact: [Dariia Nesterenko](mailto:dariia.nesterenko@fao.org) **Data lineage:** lineage statement Produced using 1. OpenStreetMap data for roads, railways, and rivers. 2. UN Map country border. 3. The HydroSHEDS 15' resolution GRID for the DEM. 4. GHSL - Global Human Settlement Layer. **Resource constraints:** This work is made available under the Creative Commons Attribution 4.0 International license (CC-BY 4.0) **Online resources:** Zipped TIF raster file for Accessibility: Travel Time-Cost to Regional Cities (Togo - ~ 500 m)

The raster dataset represents top location score areas suitable for cassava storage, filtered by exclusive criteria: access to finance, distance to major roads, access to IT (mobile broadband connection) and electricity. Access to finance and roads are defined using a linear distance threshold: • Banks - 10km buffer radius. • Major roads - 2km buffer radius. Access to IT and electricity is characterized by applying the mobile broadband coverage map and Atlas AI Electrification map. The location score is achieved by processing sub-model outputs characterizing logistical factors for crop warehouse siting: Supply, demand, Infrastructure/accessibility. The location score from 0 to 100 is then obtained through a simple arithmetic weighted sum of the normalized/scaled grids. This 500m resolution raster dataset is part of FAO’s Hand-in-Hand Initiative, Geographical Information Systems - Multicriteria Decision Analysis (GIS-MCDA) aimed at the identification of value chain infrastructure sites (optimal location). **Data publication:** 2022-12-23 **Contact points:** Resource Contact: [FAO-Data](mailto:fao-data@fao.org) Resource Contact: [Dariia Nesterenko](mailto:dariia.nesterenko@fao.org) **Data lineage:** lineage statement Major data sources, FAO GIS platform Hand-in-Hand and OpenStreetMap (open data) including the following datasets 1. Human Population Density 2020 – WorldPop2020 - Estimated total number of people per grid-cell 1km. 2. Mapspam Production – IFPRI's Spatial Production Allocation Model (SPAM) estimates crop distribution within disaggregated units. 3. OpenStreetMap. 4. Altas AI - Asset Wealth Index 2020. 5. Altas AI - Electrification. 6. Mobile Broadband Coverage produced based on: Coverage Data © Collins Bartholomew and GSMA 2021. **Resource constraints:** This work is made available under the Creative Commons Attribution 4.0 International license (CC-BY 4.0) **Online resources:** Zipped TIF raster file for Crop Storage Final Location: Cassava (Togo - ~ 500 m)

The raster dataset represents top location score areas suitable for cotton storage, filtered by exclusive criteria: access to finance, distance to major roads, access to IT (mobile broadband connection) and electricity. Access to finance and roads are defined using a linear distance threshold: • Banks - 10km buffer radius. • Major roads - 2km buffer radius. Access to IT and electricity is characterized by applying the mobile broadband coverage map and Atlas AI Electrification map. The location score is achieved by processing sub-model outputs characterizing logistical factors for crop warehouse siting: Supply, demand, Infrastructure/accessibility. The location score from 0 to 100 is then obtained through a simple arithmetic weighted sum of the normalized/scaled grids. This 500m resolution raster dataset is part of FAO’s Hand-in-Hand Initiative, Geographical Information Systems - Multicriteria Decision Analysis (GIS-MCDA) aimed at the identification of value chain infrastructure sites (optimal location). **Data publication:** 2022-12-23 **Contact points:** Resource Contact: [FAO-Data](mailto:fao-data@fao.org) Resource Contact: [Dariia Nesterenko](mailto:dariia.nesterenko@fao.org) **Data lineage:** lineage statement Major data sources, FAO GIS platform Hand-in-Hand and OpenStreetMap (open data) including the following datasets 1. Human Population Density 2020 – WorldPop2020 - Estimated total number of people per grid-cell 1km. 2. Mapspam Production – IFPRI's Spatial Production Allocation Model (SPAM) estimates crop distribution within disaggregated units. 3. OpenStreetMap. 4. Altas AI - Asset Wealth Index 2020. 5. Altas AI - Electrification. 6. Mobile Broadband Coverage produced based on: Coverage Data © Collins Bartholomew and GSMA 2021. **Resource constraints:** This work is made available under the Creative Commons Attribution 4.0 International license (CC-BY 4.0) **Online resources:** Zipped TIF raster file for Crop Storage Final Location: Cotton (Togo - ~ 500 m

The raster dataset represents top location score areas suitable for maize storage, filtered by exclusive criteria: access to finance, distance to major roads, access to IT (mobile broadband connection) and electricity. Access to finance and roads are defined using a linear distance threshold: • Banks - 10km buffer radius. • Major roads - 2km buffer radius. Access to IT is characterized by applying the mobile broadband coverage map and Atlas AI Electrification map. The location score is achieved by processing sub-model outputs characterizing logistical factors for crop warehouse siting: Supply, demand, Infrastructure/accessibility. The location score from 0 to 100 is then obtained through a simple arithmetic weighted sum of the normalized/scaled grids. This 500m resolution raster dataset is part of FAO’s Hand-in-Hand Initiative, Geographical Information Systems - Multicriteria Decision Analysis (GIS-MCDA) aimed at the identification of value chain infrastructure sites (optimal location). **Data publication:** 2022-12-23 **Contact points:** Resource Contact: [FAO-Data](mailto:fao-data@fao.org) Resource Contact: [Dariia Nesterenko](mailto:dariia.nesterenko@fao.org) **Data lineage:** lineage statement Major data sources, FAO GIS platform Hand-in-Hand and OpenStreetMap (open data) including the following datasets 1. Human Population Density 2020 – WorldPop2020 - Estimated total number of people per grid-cell 1km. 2. Mapspam Production – IFPRI's Spatial Production Allocation Model (SPAM) estimates crop distribution within disaggregated units. 3. OpenStreetMap. 4. Altas AI - Asset Wealth Index 2020. 5. Altas AI - Electrification. 6. Mobile Broadband Coverage produced based on: Coverage Data © Collins Bartholomew and GSMA 2021. **Resource constraints:** This work is made available under the Creative Commons Attribution 4.0 International license (CC-BY 4.0) **Online resources:** Zipped TIF raster file for Crop Storage Final Location: Maize (Togo - ~ 500 m)

The raster dataset consists of a 500 m score grid for the crop storage location, produced under the scope of FAO’s Hand-in-Hand Initiative, Geographical Information Systems - Multicriteria Decision Analysis for value chain infrastructure location. The location score is achieved by processing sub-model outputs that characterize logistical factors for selected crop warehouse locations: • Supply: Cassava. • Demand: Human population density, Major cities population (national and bordering countries). • Infrastructure/accessibility: main transportation infrastructure. It consists of an arithmetic weighted sum of normalized grids (0 to 100): ("Crop Production" * 0.4) + (“Major Cities Accessibility” * 0.1) + (”Poverty” * 0.1) + ("Human Population Density" * 0.2) + (“Regional Cities Accessibility” * 0.1) +(“Port Accessibility” * 0.1). **Data publication:** 2022-12-20 **Contact points:** Resource Contact: [FAO-Data](mailto:fao-data@fao.org) Resource Contact: [Dariia Nesterenko](mailto:dariia.nesterenko@fao.org) **Data lineage:** lineage statement Major data sources, FAO GIS platform Hand-in-Hand and OpenStreetMap (open data) including the following datasets 1. Human Population Density 2020 – WorldPop2020 - Estimated total number of people per grid-cell 1km. 2. Mapspam Production – IFPRI's Spatial Production Allocation Model (SPAM) estimates of crop distribution within disaggregated units. 3. OpenStreetMap. 4. Poverty – Atlas AI 2020. **Resource constraints:** This work is made available under the Creative Commons Attribution 4.0 International license (CC-BY 4.0) **Online resources:** Zipped TIF raster file for Crop Storage Location Score: Cassava (Togo - ~ 500 m)

The raster dataset consists of a 500 m score grid for the crop storage location, produced under the scope of FAO’s Hand-in-Hand Initiative, Geographical Information Systems - Multicriteria Decision Analysis for value chain infrastructure location. The location score is achieved by processing sub-model outputs that characterize logistical factors for selected crop warehouse locations: • Supply: Cotton. • Demand: Human population density, Major cities population (national and bordering countries). • Infrastructure/accessibility: main transportation infrastructure. It consists of an arithmetic weighted sum of normalized grids (0 to 100): ("Crop Production" * 0.4) + (“Major Cities Accessibility” * 0.1) + (”Poverty” * 0.1) + ("Human Population Density" * 0.2) + (“Regional Cities Accessibility” * 0.1) +(“Port Accessibility” * 0.1). **Data publication:** 2022-12-20 **Contact points:** Resource Contact: [FAO-Data](mailto:fao-data@fao.org) Resource Contact: [Dariia Nesterenko](mailto:dariia.nesterenko@fao.org) **Data lineage:** lineage statement Major data sources, FAO GIS platform Hand-in-Hand and OpenStreetMap (open data) including the following datasets 1. Human Population Density 2020 – WorldPop2020 - Estimated total number of people per grid-cell 1km. 2. Mapspam Production – IFPRI's Spatial Production Allocation Model (SPAM) estimates of crop distribution within disaggregated units. 3. OpenStreetMap. 4. Poverty – Atlas AI 2020. **Resource constraints:** This work is made available under the Creative Commons Attribution 4.0 International license (CC-BY 4.0) **Online resources:** Zipped TIF raster file for Crop Storage Location Score: Cotton (Togo - ~ 500 m)

The raster dataset consists of a 500 m score grid for the crop storage location, produced under the scope of FAO’s Hand-in-Hand Initiative, Geographical Information Systems - Multicriteria Decision Analysis for value chain infrastructure location. The location score is achieved by processing sub-model outputs that characterize logistical factors for selected crop warehouse locations: • Supply: Fruits. • Demand: Human population density, Major cities population (national and bordering countries). • Infrastructure/accessibility: main transportation infrastructure. It consists of an arithmetic weighted sum of normalized grids (0 to 100): ("Crop Production" * 0.4) + (“Major Cities Accessibility” * 0.1) + (”Poverty” * 0.1) + ("Human Population Density" * 0.2) + (“Regional Cities Accessibility” * 0.1) +(“Port Accessibility” * 0.1). **Data publication:** 2022-12-20 **Contact points:** Resource Contact: [FAO-Data](mailto:fao-data@fao.org) Resource Contact: [Dariia Nesterenko](mailto:dariia.nesterenko@fao.org) **Data lineage:** lineage statement Major data sources, FAO GIS platform Hand-in-Hand and OpenStreetMap (open data) including the following datasets 1. Human Population Density 2020 – WorldPop2020 - Estimated total number of people per grid-cell 1km. 2. Mapspam Production – IFPRI's Spatial Production Allocation Model (SPAM) estimates of crop distribution within disaggregated units. 3. OpenStreetMap. 4. Poverty – Atlas AI 2020. **Resource constraints:** This work is made available under the Creative Commons Attribution 4.0 International license (CC-BY 4.0) **Online resources:** Zipped TIF raster file for Crop Storage Location Score: Fruits (Togo - ~ 500 m)

The raster dataset consists of a 500 m score grid for the crop storage location, produced under the scope of FAO’s Hand-in-Hand Initiative, Geographical Information Systems - Multicriteria Decision Analysis for value chain infrastructure location. The location score is achieved by processing sub-model outputs that characterize logistical factors for selected crop warehouse locations: • Supply: Maize. • Demand: Human population density, Major cities population (national and bordering countries). • Infrastructure/accessibility: main transportation infrastructure. It consists of an arithmetic weighted sum of normalized grids (0 to 100): ("Crop Production" * 0.4) + (“Major Cities Accessibility” * 0.1) + (”Poverty” * 0.1) + ("Human Population Density" * 0.2) + (“Regional Cities Accessibility” * 0.1) +(“Port Accessibility” * 0.1). **Data publication:** 2022-12-20 **Contact points:** Resource Contact: [FAO-Data](mailto:fao-data@fao.org) Resource Contact: [Dariia Nesterenko](mailto:dariia.nesterenko@fao.org) **Data lineage:** lineage statement Major data sources, FAO GIS platform Hand-in-Hand and OpenStreetMap (open data) including the following datasets 1. Human Population Density 2020 – WorldPop2020 - Estimated total number of people per grid-cell 1km. 2. Mapspam Production – IFPRI's Spatial Production Allocation Model (SPAM) estimates of crop distribution within disaggregated units. 3. OpenStreetMap. 4. Poverty – Atlas AI 2020. **Resource constraints:** This work is made available under the Creative Commons Attribution 4.0 International license (CC-BY 4.0) **Online resources:** Zipped TIF raster file for Crop Storage Location Score: Maize (Togo - ~ 500 m)

The raster dataset consists of a 500 m score grid for the crop storage location, produced under the scope of FAO’s Hand-in-Hand Initiative, Geographical Information Systems - Multicriteria Decision Analysis for value chain infrastructure location. The location score is achieved by processing sub-model outputs that characterize logistical factors for selected crop warehouse locations: • Supply: Sorghum. • Demand: Human population density, Major cities population (national and bordering countries). • Infrastructure/accessibility: main transportation infrastructure. It consists of an arithmetic weighted sum of normalized grids (0 to 100): ("Crop Production" * 0.4) + (“Major Cities Accessibility” * 0.1) + (”Poverty” * 0.1) + ("Human Population Density" * 0.2) + (“Regional Cities Accessibility” * 0.1) +(“Port Accessibility” * 0.1). **Data publication:** 2022-12-20 **Contact points:** Resource Contact: [FAO-Data](mailto:fao-data@fao.org) Resource Contact: [Dariia Nesterenko](mailto:dariia.nesterenko@fao.org) **Data lineage:** lineage statement Major data sources, FAO GIS platform Hand-in-Hand and OpenStreetMap (open data) including the following datasets 1. Human Population Density 2020 – WorldPop2020 - Estimated total number of people per grid-cell 1km. 2. Mapspam Production – IFPRI's Spatial Production Allocation Model (SPAM) estimates of crop distribution within disaggregated units. 3. OpenStreetMap. 4. Poverty – Atlas AI 2020. **Resource constraints:** This work is made available under the Creative Commons Attribution 4.0 International license (CC-BY 4.0) **Online resources:** Zipped TIF raster file for Crop Storage Location Score: Sorghum (Togo - ~ 500 m)

The raster dataset consists of a 500 m score grid for the crop storage location, produced under the scope of FAO’s Hand-in-Hand Initiative, Geographical Information Systems - Multicriteria Decision Analysis for value chain infrastructure location. The location score is achieved by processing sub-model outputs that characterize logistical factors for selected crop warehouse locations: • Supply: Vegetables. • Demand: Human population density, Major cities population (national and bordering countries). • Infrastructure/accessibility: main transportation infrastructure. It consists of an arithmetic weighted sum of normalized grids (0 to 100): ("Crop Production" * 0.4) + (“Major Cities Accessibility” * 0.1) + (”Poverty” * 0.1) + ("Human Population Density" * 0.2) + (“Regional Cities Accessibility” * 0.1) +(“Port Accessibility” * 0.1). **Data publication:** 2022-12-20 **Contact points:** Resource Contact: [FAO-Data](mailto:fao-data@fao.org) Resource Contact: [Dariia Nesterenko](mailto:dariia.nesterenko@fao.org) **Data lineage:** lineage statement Major data sources, FAO GIS platform Hand-in-Hand and OpenStreetMap (open data) including the following datasets 1. Human Population Density 2020 – WorldPop2020 - Estimated total number of people per grid-cell 1km. 2. Mapspam Production – IFPRI's Spatial Production Allocation Model (SPAM) estimates of crop distribution within disaggregated units. 3. OpenStreetMap. 4. Poverty – Atlas AI 2020. **Resource constraints:** This work is made available under the Creative Commons Attribution 4.0 International license (CC-BY 4.0) **Online resources:** Zipped TIF raster file for Crop Storage Location Score: Vegetables (Togo - ~ 500 m)