Canada GIS data

This dataset contains all permit inspections for Building, Construction, Engineering, and Halifax Water permits. Metadata

Overview This layer, prepared by the Commission for Environmental Cooperation (CEC), represents mean monthly temperature values for the month of July across North America for the 1981–2010 climatological reference period, in degrees Celsius. The layer is part of a 12-raster-file (one per month) dataset derived from a kilometer-scale climate product generated using the CHELSA downscaling model, and represents long-term climatological means. The North American monthly temperature layers were derived from the CHELSA Climatologies v2.1 dataset, which is based on statistically downscaled temperature and precipitation data at a spatial resolution of 30 arc-seconds (~1 km). CHELSA (Climatologies at High Resolution for the Earth's Land Surface Areas) applies a statistical downscaling approach to atmospheric temperature fields to produce high-resolution climate surfaces. Additional technical details on the downscaling methodology and derived climate predictors are provided in: Karger, D. N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R. W., Zimmermann, N. E., Linder, H. P., & Kessler, M. (2017). Climatologies at high resolution for the Earth's land surface areas. Scientific Data, 4, 170122. https://doi.org/10.1038/sdata.2017.122 Geographic Coverage The coverage spans North America, including Canada, Mexico, and the United States. Data Sources and Licensing Commission for Environmental Cooperation (CEC). Swiss Federal Institute for Forest, Snow and Landscape Research (WSL). Karger et al. (2017). The data is licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0), allowing redistribution and adaptation with appropriate attribution. Update frequency: Irregular Limitations of use: None. Acknowledgment of the Commission for Environmental Cooperation and the (CHELSA) initiative at the Swiss Federal Research Institute WSL (Land Change Science group) would be appreciated in products derived from these data. Vintage: 1981-2010 Applications (Intended Use) Analyzing spatial and seasonal patterns of monthly temperature across North America. Supporting climate, hydrological, and water-resource research and planning. Informing agricultural and ecological modeling and land-use planning. Integration with other thematic layers in the North American Environmental Atlas for continental-scale analysis. Supporting environmental cooperation and policy-making among Canada, Mexico, and the United States. Files Download

satellite imagery by ASBURY, acquired 2026-06-02 to 2026-06-02, 19.8 cm per pixel, published on OpenAerialMap.

The Council initiated a Climate Vulnerability Assessment in response to the increased frequency of extreme heat and flooding events associated with climate change. The Land Surface Temperature raster dataset is intended for planning and alternatives analysis. This work supports regional climate mitigation and resiliency planning efforts. The Land Surface Temperature (LST) raster dataset is a dataset derived from a satellite image from Landsat 8 to show the land surface temperature for the seven-county metropolitan region of the Twin Cities, in degrees Fahrenheit. In essence, this map shows how hot the ground was to the touch at any given location. This satellite image was taken at 11:59 am CDT on July 22, 2016. At this time, the air temperature was 90F with a heat index of 90.3F, as taken at the Minneapolis-St. Paul International Airport (Minneapolis-St Paul International Airport, 2016). This was the third day of a regional heat wave, and while temperatures overnight had dipped down to around 74F, temperatures had climbed up to a maximum temperature of 97F by around 5-6pm, resulting in the hottest day in roughly three years (Midwestern Regional Climate Center, 2016). The original thermal image was taken at a 100 x 100 meter resolution, but was re-scaled and processed at the 30 x 30 meter scale. Landsat 8 collects image data at a spatial resolution of 30 meters (visible, NIR, SWIR); 100 meters (thermal); and 15 meters (panchromatic). This Landsat 8 raster image was first used to create a NDVI raster dataset. Using that NDVI dataset with Bands 10 and 11 of the Landsat 8 raster dataset, a Land Surface Temperature raster can be derived. That raster is further processed from celsius to fahrenheit, then clipped to the 7-county metropolitan area, and all water bodies removed from the final image.  The LST values without regional water bodies is the primary basis for the Metropolitan Council Climate Vulnerability Assessment Report. Part of this report specifically considers the urban heat island effect, or the effect of human activity and the built environment on increases in urban temperature on human life, and as water has different heat retention properties than most land surfaces, we chose to do our analysis without regional water bodies. It should be noted that the lowest original LST values were water bodies, and so by removing the water bodies from the map the minimum LST value raised 0.6F. This is not particularly significant, except that it would minimally affect which values would be highlighted in the third layer of this package.

Overview This 30-meter dataset reflects land cover information for 2010 from Mexico and Canada, and 2011 for Alaska and the conterminous United States. Each country developed its own classification method to identify land cover classes and provided an input layer to produce a continental land cover map across North America. The main inputs for image classification were 30-meter Landsat data; image selection varied by country according to site-specific requirements. Canada selected most images from 2010, with a few from 2009 and 2011; the United States primarily used 2011 imagery; and Mexico used all available images from 2010. National maps were generated for Canada by the Canada Centre for Remote Sensing (CCRS); for Mexico by the National Commission for the Knowledge and Use of Biodiversity (Comisión Nacional para el Conocimiento y Uso de la Biodiversidad), National Institute of Statistics and Geography (Instituto Nacional de Estadística y Geografía), and National Forestry Commission of Mexico (Comisión Nacional Forestal); and for the United States by the United States Geological Survey. Each country used its own approach, ancillary data, and mapping methodology, and the national datasets were then combined by the Commission for Environmental Cooperation (CEC) into a seamless North American product, merging four map sections: Alaska, Canada, the conterminous United States, and Mexico. The current version (version 3) includes updated data over Canada, provided by the CCRS and the Canada Centre for Mapping and Earth Observation (CCMEO) in February 2024, along with updated 2011 land cover datasets for Alaska and the conterminous United States, provided by the USGS in February 2024. The main change in Alaska relates to the inclusion of an improved road network. No updates were performed over Mexico for this version. Land Cover Classes The raster attribute table provides 19 thematic land cover classes plus a background value, with class names in English, Spanish, and French: 1: Temperate or sub-polar needleleaf forest 2: Sub-polar taiga needleleaf forest 3: Tropical or sub-tropical broadleaf evergreen forest 4: Tropical or sub-tropical broadleaf deciduous forest 5: Temperate or sub-polar broadleaf deciduous forest 6: Mixed forest 7: Tropical or sub-tropical shrubland 8: Temperate or sub-polar shrubland 9: Tropical or sub-tropical grassland 10: Temperate or sub-polar grassland 11: Sub-polar or polar shrubland-lichen-moss 12: Sub-polar or polar grassland-lichen-moss 13: Sub-polar or polar barren-lichen-moss 14: Wetland 15: Cropland 16: Barren lands 17: Urban and built-up 18: Water 19: Snow and ice Geographic Coverage The service covers Canada, the United States, and Mexico, including Alaska. Data Sources and Licensing This dataset is produced by the Commission for Environmental Cooperation (CEC), derived from national land cover maps provided by Natural Resources Canada, the National Commission for the Knowledge and Use of Biodiversity, the National Institute of Statistics and Geography, the National Forestry Commission; and the United States Geological Survey. The compiled dataset is licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0), allowing redistribution and adaptation with appropriate attribution. Update frequency: Irregular Limitations of use: Intended for continental-scale reference. Vintage: 2010 Applications (Intended Use) Land cover review and continental- to national-scale mapping. Environmental monitoring and change detection over time. Spatial analysis and integration with other thematic layers in the North American Environmental Atlas. Supporting cross-border environmental cooperation and policy-making among North American nations. Files Download

Overview This layer, prepared by the Commission for Environmental Cooperation (CEC), represents the month of July within a dataset of 12 raster files (one for each month) representing total precipitation values across North America for the 1981–2010 climatological reference period, in millimeters. The dataset is derived from a kilometer-scale climate product generated using the CHELSA downscaling model and represents long-term climatological means. The North American monthly precipitation layers were derived from the CHELSA Climatologies v2.1 dataset, which is based on statistically downscaled temperature and precipitation data at a spatial resolution of 30 arc-seconds (~1 km). CHELSA (Climatologies at High Resolution for the Earth's Land Surface Areas) applies a statistical downscaling approach to atmospheric precipitation fields to produce high-resolution climate surfaces. Additional technical details on the downscaling methodology and derived climate predictors are provided in: Karger, D. N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R. W., Zimmermann, N. E., Linder, H. P., & Kessler, M. (2017). Climatologies at high resolution for the Earth's land surface areas. Scientific Data, 4, 170122. https://doi.org/10.1038/sdata.2017.122 Geographic Coverage The coverage spans North America, including Canada, Mexico, and the United States. Data Sources and Licensing Commission for Environmental Cooperation (CEC). Swiss Federal Institute for Forest, Snow and Landscape Research (WSL). Karger et al. (2017). The data is licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0), allowing redistribution and adaptation with appropriate attribution. Update frequency: Irregular Limitations of use: None. Acknowledgment of the Commission for Environmental Cooperation and the (CHELSA) initiative at the Swiss Federal Research Institute WSL (Land Change Science group) would be appreciated in products derived from these data. Vintage: 1981-2010 Applications (Intended Use) Analyzing spatial and seasonal patterns of monthly precipitation across North America. Supporting climate, hydrological, and water-resource research and planning. Informing agricultural and ecological modeling and land-use planning. Integration with other thematic layers in the North American Environmental Atlas for continental-scale analysis. Supporting environmental cooperation and policy-making among Canada, Mexico, and the United States. Files Download

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows median household income by race and by age of householder. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. Median income and income source is based on income in past 12 months of survey.  This layer is symbolized to show median household income. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B19013B, B19013C, B19013D, B19013E, B19013F, B19013G, B19013H, B19013I, B19049, B19053Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows fertility in past 12 months by age of mother. This is shown by tract, county, and state boundaries. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. The calculated percentages are slightly different from traditional age-specific fertility rates in that the total number of live births (due to twins or higher-order multiple births) is not available in this table.  This layer is symbolized to show the percent of women age 15 to 50 who had a birth in the past 12 months.  To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B13016Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters).  The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico   Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows public vs. private school enrollment by sex by grade group. This is shown by tract, county, and state boundaries. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. Any schools that receives public funding are considered public, including continuation schools and some charter & online schools.  This layer is symbolized to show the percentage of students in kindergarten through 12th grade who are enrolled in a private school. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B14002Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters).    The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows veteran status of adults (18+) broken down by age and sex. This is shown by tract, county, and state boundaries. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized to show the percentage of adults who are veterans. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B21001Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows children in grandparent households by age. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. Only children in households in which the grandparent is the householder are included here. This is different from children in multigenerational households.  This layer is symbolized to show the count and percentage of children who are in the care of grandparents. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B10001, B10002, B09001 (Not all lines of ACS table B09001 are available in this feature layer.)Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases. Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Elevation Points - Section D, last updated in 2026.  Part of A through R, divided by concession blocks across the municipal extents.  Often used in 3D modelling.  UTM Co-ordinates, with height Z-values in Metres.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows basic population and housing context. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized to show the predominant housing type: owner-occupied, renter-occupied, or vacant. The size of the symbol represents the total count of housing units. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B01001, B03002, B05003, B05011, B19049, B25002, B25003, B25058, B25077Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico   The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico   Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

uav imagery by Damien Butler, acquired 2026-03-19 to 2026-03-19, 0.8 cm per pixel, published on OpenAerialMap.

This dataset was created to carry out geo-spatial network analysis. Metadata Note: this dataset experienced schema changes on August 18, 2021, see the Traffic Control Locations dataset for data that was removed from Street Junctions.

aircraft imagery by River Valley Aerials, acquired 2025-07-27 to 2025-07-27, 5.0 cm per pixel, published on OpenAerialMap.

Point representation of mobility counters throughout the municipality. This dataset can be used in conjunction with the Bicycle Counts dataset.The dataset was compiled to track the location of mobility counters that have been installed in the municipality. Metadata

Site Regions and Site Districts of Ontario represent an early Ecological Land Classification (ELC) system originally developed by Angus Hills. This dataset was revised by the ELC Working Group in 2000 to better reflect new information and new technology. The Site Regions of Ontario was used for descriptive, planning, and resource management purposes. This upper level in its hierarchy was most useful for provincial and regional roll-ups of data and for strategic planning. Site Districts of Ontario is a more detailed lower (finer-scale) level of the hierarchy, and was more useful for detailed resource management prescriptions and other local and site planning applications. This layer is designed to be used as a spatial selection tool and as a background layer suitable for overlay and or intersection with numerous scales or current hydrologic data. Additional Documentation Site District - Data Description (PDF) Site District - Documentation (Word) Status Historical archive: data has been stored in an offline storage facility Maintenance and Update Frequency Not planned: there are no plans to update the data Contact Peter Uhlig, Peter.Uhlig@ontario.ca

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows veteran status of adults (18+) broken down by age and sex. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized to show the count and percentage of adults who are veterans. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B21001Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows nativity & citizenship status, & year of naturalization. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer shows the count of population and percent foreign born. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B05003, B05011Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows poverty status by age group. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. Poverty status is based on income in past 12 months of survey.  This layer is symbolized to show the count and percentage of the population whose income falls below the Federal poverty line. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B17020, C17002Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows living arrangements of children and adults by age group. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. This layer is symbolized to show the count of adults in households and percentage of adults living with a spouse. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B09005 (formerly B09008), B09021Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows language or language groups spoken at home by English ability. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized to show the count and percent of individuals age 5+ who are bilingual in English and another language (speak English very well and speak another language at home). To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): C16001Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data.   Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases. Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters).  The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows housing units by year built by tenure (owner or renter). This is shown by tract, county, and state boundaries. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. This layer is modified every few years to change the top-end and bottom-end categories of the years. This layer is symbolized to show the predominant period that housing units were built in. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B25034, B25036, B25035, B25037 (Not all lines of ACS table B25036 are available in this layer.)Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Layer Overview  The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Cloud Fraction layer provides information on the effective cloud fraction at 466 nm derived from the O2-O2 cloud retrieval algorithm used in TEMPO data processing. The effective cloud fraction is provided on a scale of zero (0) to one (1), with higher values indicating cloudier pixels and is a unitless quantity. The TEMPO cloud product is used to derive vertical columns of TEMPO trace gases (e.g., nitrogen dioxide, formaldehyde). Thus, this cloud fraction layer can be used to identify cloud coverage as observed by the TEMPO instrument, as well as used in conjunction with the TEMPO nitrogen dioxide and formaldehyde image services to provide context and additional information for those data. TEMPO cloud fraction Level 3 files provide cloud fraction information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The data have been converted from their native file format (netCDF4) to Cloud Raster Format (CRF). Temporal Coverage The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the field of regard and in the evenings over the western portion of the field of regard. Each image is presented with the starting timestamp of the corresponding TEMPO scan. Due to the nature of the TEMPO instrument’s east to west scanning pattern, each image is a composite of measurements taken over a period of 40-60 minutes, depending on the spatial coverage of the scan. Data are available from September 17, 2025 to the present and updated daily with the previous day’s data. These data correspond to the Version 04 (V04) product operationally generated by the TEMPO science data processing center. All the observations since the beginning of the TEMPO mission (August 2023) are being reprocessed with to V04, and data will be added to this service upon their generation.   Geographic Coverage Imagery is available for the TEMPO field of regard covering the continental United States (CONUS), and much of Mexico, Canada, and the Caribbean. The imagery in this image service is regridded onto a 0.02º longitude x 0.02º latitude grid and presented in the geographic coordinate system WGS 1984. The sensor’s native spatial resolution is about 2 km x 4.75 km at the center of TEMPO’s field of regard (33.5°N, 89.2°W) in WGS 1984. Data Filtering The layer is filtered to remove pixels at high solar zenith angles, which typically have low quality. The applied filter is set to remove pixels based on the following criterion: solar_zenith_angle > 80°. Cloud fractions outside the range between 0.0 and 1.0 represent missing values. Data Validation These data should be considered as provisional products per the Provisional Product Maturity level defined in the TEMPO validation plan. The provisional maturity level means that product performance has been demonstrated through a large, but still (seasonally or otherwise) limited number of independent measurements. The analysis is sufficient for limited qualitative determinations of product fitness-for-purpose, and the product is potentially ready for testing by operational users and may be suitable for scientific publication. Users may consult the TEMPO User Guide for descriptions of the data and associated known issues.  Recommended Usage Notes When viewing the image service in the Esri online map viewer, it is recommended to use the multidimensional slider rather than the default time slider. The multidimensional slider can be accessed via the “multidimensional” icon in the right-hand menu.  TEMPO Mission Overview The Tropospheric Emissions: Monitoring of Pollution (TEMPO) instrument is a grating spectrometer, sensitive to the visible (VIS) and ultraviolet (UV) wavelengths of light in the spectral range of 290-490 nm and 540-740 nm with about 0.6 nm spectral resolution. The TEMPO instrument is attached to the Earth-facing side of a commercial telecommunications satellite (Intelsat 40e) in a geostationary orbit over 91° W longitude (about 22,000 miles above Earth’s equator). This allows TEMPO to maintain a continuous view of North America so that the instrument's light-collecting mirror can make a complete east-to-west scan of the field of regard hourly during daylight hours. By measuring sunlight reflected and scattered from the Earth's surface and atmosphere back to the instrument's detectors, TEMPO's ultraviolet and visible light sensors provide measurements of ozone, nitrogen dioxide, formaldehyde, and other constituents of Earth’s atmosphere. The primary mission objective of TEMPO is to improve our understanding of air quality and its impacts. By providing near real-time data and comprehensive atmospheric composition measurements, TEMPO helps advance knowledge of the Earth system and improve air quality forecasting. These data also aid in quantifying how air quality affects vegetation, agriculture, and human health, among others. Contact For inquiries about this service, please contact larc-dl-asdc-tempo@mail.nasa.gov or post/view questions on the Earthdata Forum.

Brampton Plan Watercourses include rivers, streams, creeks, and drainage channels that form part of Brampton's natural and hydrological systems. These features convey water across the landscape, provide important ecological functions, and contribute to flood management, environmental health, and natural heritage connectivity.  For more up-to-date data, refer to other open data sources on GeoHub. This data is intended to be used in conjuction with other related mapping layers for this schedule, and may be impacted by other schedules, with consideration to the text of Brampton Plan.

uav imagery by WebODM-LowestPotential, acquired 2025-05-12 to 2025-05-12, 5.0 cm per pixel, published on OpenAerialMap.

uav imagery by Parks Canada, acquired 2025-05-15 to 2025-05-15, 4.0 cm per pixel, published on OpenAerialMap.

uav imagery by WebODM, acquired 2025-05-26 to 2025-05-26, 2.0 cm per pixel, published on OpenAerialMap.

uav imagery by veritas terrae, acquired 2026-05-02 to 2026-05-03, 5.0 cm per pixel, published on OpenAerialMap.

uav imagery by Veteran Droners, acquired 2026-02-17 to 2026-02-18, 7.2 cm per pixel, published on OpenAerialMap.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows vacant housing by type (for rent/sale, vacation home, etc.). This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. This layer is symbolized to show the count and percent of housing units that are vacant. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B25004, B25002, B25003 (Not all lines of ACS tables B25002 and B25003 are available in this layer.)Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows workers' place of residence by commute length. This is shown by tract, county, and state boundaries. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized to show the percentage of commuters whose commute is 90 minutes or more. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B08303Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.

This list is updated and maintained by Syracuse's Landmark Preservation Board. Data Dictionary:  LabelDefinitionDefinition SourceSBLSection Block Lot Number (SBL).  This is the unique identifier for that Parcel.  Syracuse Landmark Preservation BoardProperty_AddressThe address of the property or district that is a locally protected site or district.  These are parcel addresses not mailing addresses.Syracuse Landmark Preservation BoardZipThe Zip code of the property or district that is a locally protected site or district.Syracuse Landmark Preservation BoardLPSSLocally Protected Site.  This wil either be listed as "Local Protected Site or Local District", "Eligible/Architecturally Significant", or will be empty.  Syracuse Landmark Preservation BoardNR_EligibleThis states whether the property is eligible to be on the National Registry for Historica Places or if it is listed.  The possible values are "NR Listed" - Is listed on the registry, "NR Eligible (SHPO)" - Is eligibel to be listed on the State Historic Preservation Office, or an empty field which means that the property is neither of those.Syracuse Landmark Preservation BoardLatitudeThe latitude where the property or district is located at.Syracuse Landmark Preservation BoardLongitudeThe longitude where the property or district is located at.Syracuse Landmark Preservation Board    Dataset Contact Information: Organization: Landmark Preservation BoardPosition:Preservation PlannerCity:Syracuse, NYE-Mail Address:KAuwaerter@syr.gov

uav imagery by Robert Howe, acquired 2025-11-22 to 2025-11-23, 6.8 cm per pixel, published on OpenAerialMap.

Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows residence one year ago for those 1 year and older. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   This layer is symbolized to show the count and percent of people one year and over who lived in a different state one year ago.  To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left.  Vintage: 2019-2023ACS Table(s): B07204 (Not all lines of this ACS table are available in this feature layer.)Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov  The United States Census Bureau's American Community Survey (ACS):About the Survey   Geography & ACS   Technical Documentation   News & Updates   This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census:  Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data).  The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.   Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.   Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.   The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate.   The data for this geographic area cannot be displayed because the number of sample cases is too small.