Canada GIS data
＋ Follow new data508 datasets.
uav imagery by Robert Howe, acquired 2025-10-03 to 2025-10-04, 2.9 cm per pixel, published on OpenAerialMap.
HRDPA is ECCC’s high-resolution precipitation analysis, merging gauge, radar, and HRDPS model data. This layer aggregates the final (or preliminary) HRDPA accumulations to sub-basin polygons. Each record indicates the average precipitation that truly occurred over each watershed, vital for verifying model forecasts, calibrating hydrological models, and conducting post-event analyses of flood or drought severity.
Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows median earnings by occupational group. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. Only full-time year-round workers included. Median earnings is based on earnings in past 12 months of survey. Occupation Groups based on Bureau of Labor Statistics (BLS)' Standard Occupation Classification (SOC). This layer is symbolized to show median earnings of the full-time, year-round civilian employed population. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left. Vintage: 2019-2023ACS Table(s): B24021Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov The United States Census Bureau's American Community Survey (ACS):About the Survey Geography & ACS Technical Documentation News & Updates This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census: Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases. Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution. The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate. The data for this geographic area cannot be displayed because the number of sample cases is too small.
Date of Images: Post-Event: 6/24/2024 Pre-Event: 6/9/2024-6/16/2024 Date of Next Image: Unknown Summary: Natural Color: The Natural Color RGB provides a false composite look at the surface. This RGB uses a shortwave, the near-infrared, and red channels from the instrument. Color Infrared: The Color Infrared composite is created using the near-infrared, red, and green channels, allowing for the ability to see areas impacted from the fires. The near-infrared gives the ability to see through thin clouds. Healthy vegetation is shown as red, water is in blue. True Color: The True Color RGB composite provides a product of how the surface would look to the naked eye from space. The RGB is created using the red, green, and blue channels of the respective instrument. Suggested Use: Natural Color: areas of water will appear blue, healthy green vegetation will appear as a bright green, urban areas in various shades of magenta. Color Infrared: depicts healthy vegetation as red, water as blue. Some minor atmospheric corrections have occurred. True Color: provides a product of how the surface would look to the naked eye from space. The True Color RGB is produced using the 3 visible wavelength bands (red, green, and blue) from the respective sensor. Some minor atmospheric corrections have occurred. Satellite/Sensor: Landsat 8 Operational Land Imager (OLI) Landsat 9 Operational Land Imager-2 (OLI-2) Resolution: 30m Credits: NASA/GSFC, USGS Service URL: https://gis.earthdata.nasa.gov/portal/home/item.html?id=4e2762ba58b94e3981be20fa1040d286 WMS Endpoint: https://gis.earthdata.nasa.gov/portal/services/DISASTERS_202406_FLOOD_IA/2414_landsat/ImageServer/WMSServer
Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows education level for adults (25+) by veteran status. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. This layer is symbolized to show the percent of veteran civilians age 25+ who have a bachelor's degree or higher as their highest education level. The size of the symbols represent the count of veteran civilians age 25+ with a bachelor's degree or higher. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left. Vintage: 2019-2023ACS Table(s): B21003Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov The United States Census Bureau's American Community Survey (ACS):About the Survey Geography & ACS Technical Documentation News & Updates This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census: Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases. Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution. The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate. The data for this geographic area cannot be displayed because the number of sample cases is too small.
uav imagery by Sean Frey, acquired 2025-10-05 to 2025-10-05, 3.2 cm per pixel, published on OpenAerialMap.
uav imagery by WebODM, acquired 2025-06-27 to 2025-06-27, 7.2 cm per pixel, published on OpenAerialMap.
Overview This layer shows the grasslands priority conservation areas (GPCAs) within North America's Central Grasslands, an ecosystem considered among the most threatened on the continent and the world. GPCAs are areas of tri-national importance due to their ecological significance and threatened nature, which require international cooperation for their successful conservation. This layer is part of the North American Environmental Atlas, produced through a collaboration between the national atlas programs of Canada, Mexico, and the United States, in partnership with the Commission for Environmental Cooperation (CEC). The 55 original GPCAs were identified in 2004 by 36 experts from Canada, Mexico, and the United States, during a workshop co-organized by the CEC and The Nature Conservancy (TNC). In 2010, the Rocky Mountain Bird Observatory (RMBO) updated the dataset using national and international land cover, elevation, habitat, species, and bird survey data, bringing the total to 59 GPCAs. Each area was scored and ranked based on its importance to key grassland species and the rate at which its habitat was being lost. Geographic Coverage This layer covers the Central Grasslands ecosystem of North America, spanning parts of Canada, Mexico, and the United States. Data Sources and Licensing This dataset draws on more than 120 physical, biological, and social data sets from federal, state, and provincial governments, engineering and environmental firms, universities, industries, and conservation organizations, including USGS land cover and elevation layers, USGS Breeding Bird Surveys and Christmas Bird Counts, RMBO bird and vegetation surveys, and Canadian Wildlife Service bird surveys. Further detail on the selection methodology is available in the North American Grassland Priority Conservation Areas: Technical Report and Documentation. This material is licensed under CC BY 4.0, allowing non-exclusive rights to distribute, remix, adapt, and build upon the material in any medium or format, including for commercial purposes, so long as attribution is given to the creator. Update frequency: Not planned Limitations of use: None. Acknowledgement of the Commission for Environmental Cooperation, the Rocky Mountain Bird Observatory, and (or) the Nature Conservancy would be appreciated in products derived from these data. Vintage: 2010 Applications (Intended Use) Conservation planning and priority-setting for grassland habitats across North America. Biodiversity research and monitoring of grassland-dependent species. Cross-border collaboration in the conservation of shared grassland ecosystems. Land use and natural resource management, including habitat protection. Integration with other thematic layers in the North American Environmental Atlas for continental-scale analysis. Supporting environmental cooperation and policy-making among Canada, Mexico, and the United States. Files Download
Polygon representation of areas within community plan areas where specific land use policies apply.The data was created by HRM Planning and Development for the purpose of delineating detailed plan areas within community and secondary plan areas.This dataset is to be used and interpreted in conjunction with the Community Plan Areas dataset. Metadata
Table of Public Works ROW permits issued by HRM Public Works Traffic Management from the new Permitting, Planning, Licensing & Compliance (PPL&C) solution. This dataset contains all permits issued under the permit type of Right of Way Permits not related to HRM Building Permits and/or Construction Permits. Metadata
Overview This 30-meter dataset reflects land cover information for 2020 from Mexico and Canada, and 2021 over the conterminous United States and Alaska. Each country developed its own classification method to identify land cover classes and provided an input layer to produce a continental land cover map across North America. The main inputs for image classification were 30-meter Landsat 8 Collection 2 Level 1 data across the three countries; image selection and spectral band reduction varied by country according to site-specific requirements. Canada selected most images from 2020, with a few from 2019 and 2021; the conterminous United States and Alaska relied mainly on 2021 imagery; and the Mexico map was based on change detection between 2015 and 2020 Landsat 8 mosaics. National maps were generated for Canada by the Canada Centre for Remote Sensing (CCRS); for Mexico by the National Commission for the Knowledge and Use of Biodiversity (Comisión Nacional para el Conocimiento y Uso de la Biodiversidad), National Institute of Statistics and Geography (Instituto Nacional de Estadística y Geografía), and National Forestry Commission of Mexico (Comisión Nacional Forestal); and for the United States by the United States Geological Survey. Each country used its own approach, ancillary data, and mapping methodology, and the national datasets were then combined by the Commission for Environmental Cooperation (CEC) into a seamless North American product, merging four map sections: Alaska, Canada, the conterminous United States, and Mexico. The current version (version 2) integrates updated land cover information for the conterminous United States, Alaska, and Canada, based on national maps updated in February 2024 by the USGS and CCRS. Unlike version 1, where the conterminous United States represented 2019 conditions, this version corresponds to 2021. Land Cover Classes The raster attribute table provides 19 thematic land cover classes plus a background value, with class names in English, Spanish, and French: 1: Temperate or sub-polar needleleaf forest 2: Sub-polar taiga needleleaf forest 3: Tropical or sub-tropical broadleaf evergreen forest 4: Tropical or sub-tropical broadleaf deciduous forest 5: Temperate or sub-polar broadleaf deciduous forest 6: Mixed forest 7: Tropical or sub-tropical shrubland 8: Temperate or sub-polar shrubland 9: Tropical or sub-tropical grassland 10: Temperate or sub-polar grassland 11: Sub-polar or polar shrubland-lichen-moss 12: Sub-polar or polar grassland-lichen-moss 13: Sub-polar or polar barren-lichen-moss 14: Wetland 15: Cropland 16: Barren lands 17: Urban and built-up 18: Water 19: Snow and ice Geographic Coverage The service covers Canada, the United States, and Mexico, including Alaska. Data Sources and Licensing This dataset is produced by the Commission for Environmental Cooperation (CEC), derived from national land cover maps provided by Natural Resources Canada, the National Commission for the Knowledge and Use of Biodiversity, the National Institute of Statistics and Geography, the National Forestry Commission; and the United States Geological Survey. The compiled dataset is licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0), allowing redistribution and adaptation with appropriate attribution. Update frequency: Irregular Limitations of use: Intended for continental-scale reference. Vintage: 2020 Applications (Intended Use) Land cover review and continental- to national-scale mapping. Environmental monitoring and change detection over time. Spatial analysis and integration with other thematic layers in the North American Environmental Atlas. Supporting cross-border environmental cooperation and policy-making among North American nations. Files Download
satellite imagery by Robert Howe, acquired 2025-10-07 to 2025-10-07, 11.2 cm per pixel, published on OpenAerialMap.
satellite imagery by Maxwell Ward, acquired 2025-08-02 to 2025-08-03, 6.5 cm per pixel, published on OpenAerialMap.
This dataset shows the boundaries for peat leases and peat exploration licences on Crown lands in New Brunswick. A peat exploration licence grants the holder the exclusive right to conduct field tests to determine whether the quality and volume of peat in a specified area are suitable for the intended use. A peat lease allows the holder to extract or remove peat from Crown lands. Cet ensemble de données représente les limites des baux d’exploitation de tourbière et des licences d’exploration de tourbière situés sur les terres de la Couronne au Nouveau-Brunswick.Une licence d’exploration de tourbière accorde à son titulaire le droit exclusif d’effectuer des essais sur le terrain afin de déterminer si la qualité et le volume de la tourbe dans la zone visée conviennent à l’utilisation prévue. Un bail d’exploitation de tourbière autorise son titulaire à prendre ou à enlever de la tourbe des terres de la Couronne.
Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows nativity & citizenship status, & year of naturalization. This is shown by tract, county, and state boundaries. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. This layer shows the percent foreign born. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left. Vintage: 2019-2023ACS Table(s): B05003, B05011Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov The United States Census Bureau's American Community Survey (ACS):About the Survey Geography & ACS Technical Documentation News & Updates This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census: Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases. Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution. The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate. The data for this geographic area cannot be displayed because the number of sample cases is too small.
Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows median age broken down by sex and race group. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. This layer is symbolized to show the median age of the population. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left. Vintage: 2019-2023ACS Table(s): B01001, B01002, B01002B, B01002C, B01002D, B01002E, B01002F, B01002G, B01002H, B01002I (Not all lines of ACS table B01001 are available in this feature layer.)Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov The United States Census Bureau's American Community Survey (ACS):About the Survey Geography & ACS Technical Documentation News & Updates This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census: Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases. Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution. The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate. The data for this geographic area cannot be displayed because the number of sample cases is too small.
Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows housing costs as a percentage of household income by age. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. Income is based on earnings in past 12 months of survey. This layer is symbolized to show the predominant housing type for householders where the householder is age 65+ and spending at least 30% of their income on housing. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left. Vintage: 2019-2023ACS Table(s): B25072, B25093Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov The United States Census Bureau's American Community Survey (ACS):About the Survey Geography & ACS Technical Documentation News & Updates This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census: Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases. Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution. The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate. The data for this geographic area cannot be displayed because the number of sample cases is too small.
Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows total population count by sex and age group. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. This layer is symbolized to show the percent and count of the dependent population (ages 65+ and Vintage: 2019-2023ACS Table(s): B01001Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov The United States Census Bureau's American Community Survey (ACS):About the Survey Geography & ACS Technical Documentation News & Updates This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census: Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases. Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution. The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate. The data for this geographic area cannot be displayed because the number of sample cases is too small.
Table of water permits by Halifax Regional Water Commission (Halifax Water) related to Building Permits & Construction Permits from the Permitting, Planning, Licensing & Compliance (PPL&C) solution. This dataset contains all permits under the permit type of Water Permits. Metadata
uav imagery by Maxwell Ward, acquired 2025-08-16 to 2025-08-17, 6.5 cm per pixel, published on OpenAerialMap.
This dataset contains polygon features representing Crown Quarry Lease boundaries administered by the Department of Natural Resources. The dataset provides information on the location and extent of Crown Quarry Leases on Crown land and supports public understanding of Crown land tenure and resource management. Cet ensemble de données contient des éléments polygonaux représentant les limites des baux d’exploitation de carrière sur les terres de la Couronne gérés par le ministère des Ressources naturelles. Il fournit des renseignements sur l’emplacement et l’étendue des baux d’exploitation de carrière sur les terres de la Couronne et aide le public à mieux comprendre la tenure des terres de la Couronne et la gestion des ressources.
Established Rural Estate Residential Areas are existing low-density residential communities located within Brampton’s rural area. These areas are intended to maintain their established estate-residential character while recognizing existing development patterns, lot configurations, and servicing constraints. Development and redevelopment within these areas is generally limited and must be compatible with the surrounding rural landscape and community character. This data is intended to be used in conjuction with other related mapping layers for this schedule, and may be impacted by other schedules, with consideration to the text of Brampton Plan.
Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows household size by number of vehicles available. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. This layer is symbolized to show the count and percentage of households with no vehicle available. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left. Vintage: 2019-2023ACS Table(s): B08201Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov The United States Census Bureau's American Community Survey (ACS):About the Survey Geography & ACS Technical Documentation News & Updates This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census: Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases. Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution. The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate. The data for this geographic area cannot be displayed because the number of sample cases is too small.
Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows English ability and linguistic isolation by age group. This is shown by tract, county, and state boundaries. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. Linguistically isolated households are households in which no one 14 and over speak English only or speaks a language other than English at home and speaks English very well. This layer is symbolized to show the percent of adult (18+) population who have limited English ability. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left. Vintage: 2019-2023ACS Table(s): B16003, B16004 (Not all lines of ACS table B16004 are available in this feature layer.)Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov The United States Census Bureau's American Community Survey (ACS):About the Survey Geography & ACS Technical Documentation News & Updates This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census: Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases. Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution. The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate. The data for this geographic area cannot be displayed because the number of sample cases is too small.
Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows tenure (owner or renter) by race of householder. This is shown by tract, county, and state boundaries. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. This layer is symbolized by the overall homeownership rate. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left. Vintage: 2019-2023ACS Table(s): B25003, B25003B, B25003C, B25003D, B25003E, B25003F, B25003G, B25003H, B25003IData downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov The United States Census Bureau's American Community Survey (ACS):About the Survey Geography & ACS Technical Documentation News & Updates This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census: Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases. Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution. The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate. The data for this geographic area cannot be displayed because the number of sample cases is too small.
Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows population broken down by race and Hispanic origin. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. This layer is symbolized to show the predominant race living within an area, and the total population in that area. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left. Vintage: 2019-2023ACS Table(s): B03002Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov The United States Census Bureau's American Community Survey (ACS):About the Survey Geography & ACS Technical Documentation News & Updates This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census: Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases. Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution. The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate. The data for this geographic area cannot be displayed because the number of sample cases is too small.
Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows hours worked, and those unemployed and not in labor force. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. This layer is symbolized to show the percent and count of unemployed population within the civilian labor force. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left. Vintage: 2019-2023ACS Table(s): B23020, B23025Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov The United States Census Bureau's American Community Survey (ACS):About the Survey Geography & ACS Technical Documentation News & Updates This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census: Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases. Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution. The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate. The data for this geographic area cannot be displayed because the number of sample cases is too small.
Overview This service provides elevation data from an 2018 to 2019 LiDAR project as a tiled mosaic dataset with one 32 bit floating point band at 1 meter cell size. It covers an area in British Columbia and is delivered with LERC compression for efficient access in 3D workflows. The service supports surface elevation use in 3D applications and provides access to raster catalog content through Image, Catalog, Mensuration, and Metadata capabilities. Band Characteristics The raster contains one band named Band 1. Number of bands: 1 Pixel type: 32 bit floating point Band values: minimum 340.84, mean 1142.65, maximum 2172.12, standard deviation 446.64 Raster Properties Pixel size: 1 by 1 meter Dataset format: AMD Default resampling: Bilinear Compression: None Tile cache: Pre cached elevation cache with 256 by 256 tiles in LERC format Levels of detail: 19 levels from scale 591657527.59 to 2256.99 Histogram range: 340.84 to 2172.12 The service allows raster functions for surface visualization and terrain analysis, including hillshade from multiple azimuths, shaded relief, contour generation at 2 meter, 20 meter, and 100 meter intervals, slope, and classification templates. Mosaic Properties This service is a mosaic dataset that combines elevation source tiles on the fly. Users can query the catalog, view item metadata, and work with mosaic methods such as NorthWest, Center, LockRaster, ByAttribute, Nadir, Viewpoint, Seamline, and None. The catalog can return up to 1000 records per query, with support for statistics, ordering, pagination, and distinct queries. Available item fields include image name, category, product name, grouping fields, center position, z order, and footprint attributes. The category domain includes values such as Primary, Overview, Unprocessed Overview, Partial Overview, Inactive, Uploaded, Incomplete, and Custom. Geographic Coverage The service covers Regional District of Central Okanagan in British Columbia and uses the Web Mercator spatial reference. Extent:X min: -120.1042 Y min: 49.6333 X max: -118.7617 Y max: 50.2819 Spatial reference: Web Mercator (102100) Use Cases The service supports elevation visualization, terrain measurement, surface analysis, and 3D scene integration. It allows analysis, and it is suited to users who need detailed LiDAR-derived elevation source data from the OBWB and GeoBC.
Overview This layer, prepared by the Commission for Environmental Cooperation (CEC), represents the maximum temperature of the warmest month across North America for the 1981–2010 climatological reference period, in degrees Celsius. The dataset shows the highest monthly mean of daily maximum temperatures across the year, highlighting peak thermal conditions, and is derived from a kilometer-scale climate product generated using the CHELSA downscaling model, representing long-term climatological means. The North American maximum temperature layer was derived from the CHELSA v2.1 bioclimatic variables (BIO5) dataset, which is based on statistically downscaled temperature data at a spatial resolution of 30 arc-seconds (~1 km). CHELSA (Climatologies at High Resolution for the Earth's Land Surface Areas) applies a mechanistic, terrain-informed downscaling framework that accounts for orographic effects, atmospheric lapse rates, and wind-driven processes to produce high-resolution climate surfaces. Additional technical details on the downscaling methodology and derived climate predictors are provided in: Brun, P., Zimmermann, N. E., Hari, C., Pellissier, L., & Karger, D. N. (2022). Global climate-related predictors at kilometer resolution for the past and future. Earth System Science Data, 14(12), 5573–5603. https://doi.org/10.5194/essd-14-5573-2022 Geographic Coverage The coverage spans North America, including Canada, Mexico, and the United States. Data Sources and Licensing Commission for Environmental Cooperation (CEC). Swiss Federal Institute for Forest, Snow and Landscape Research (WSL). Brun et al. (2022). The data is licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0), allowing redistribution and adaptation with appropriate attribution. Update frequency: Irregular Limitations of use: None. Acknowledgment of the Commission for Environmental Cooperation and the (CHELSA) initiative at the Swiss Federal Research Institute WSL (Land Change Science group) would be appreciated in products derived from these data. Vintage: 1981-2010 Applications (Intended Use) Analyzing spatial patterns of peak monthly temperature across North America. Supporting heat stress, drought, and climate risk assessment. Informing agricultural, ecological, and species distribution modeling. Integration with other thematic layers in the North American Environmental Atlas for continental-scale analysis. Supporting environmental cooperation and policy-making among Canada, Mexico, and the United States. Files Download
This dataset shows the boundaries of the province's six fire management zones that existed prior to 2014 in which most forest fires received the same type of response. These management zones were based on: Common forest and forest fire management objectives land use density of values at risk fire load forest ecology The 2014 Wildland Fire Management Strategy moved from a zone-based approach to one where each wildland fire is assessed and receives an appropriate response according to the circumstances and condition of the fire. Additional DocumentationFire Management Zone - Data Description (PDF) Fire Management Zone - Documentation (Word) StatusCompleted: Production of the data has been completed Maintenance and Update FrequencyAs needed: Data is updated as deemed necessary ContactAviation, Forest Fire and Emergency ServicesAFFES.GIS@ontario.ca
COS Benchbook for public access. The point information contained was mapped by the City of Springfield through differential leveling methods. This elevation data was collected at various times in the past several decades, and was recently verified for accuracy in the Summer of 2010. To verify accuracy, the existing differential leveled data was shot with GPS and benchmarks found to be errant were re-leveled by differential methods. These data are intended for use in engineering and citywide planning. There are no warranties that accompany this product.
satellite imagery by Asbury, acquired 2026-06-01 to 2026-06-02, 27.9 cm per pixel, published on OpenAerialMap.
Overview This layer, prepared by the Commission for Environmental Cooperation (CEC), represents mean monthly temperature values for the month of August across North America for the 1981–2010 climatological reference period, in degrees Celsius. The layer is part of a 12-raster-file (one per month) dataset derived from a kilometer-scale climate product generated using the CHELSA downscaling model, and represents long-term climatological means. The North American monthly temperature layers were derived from the CHELSA Climatologies v2.1 dataset, which is based on statistically downscaled temperature and precipitation data at a spatial resolution of 30 arc-seconds (~1 km). CHELSA (Climatologies at High Resolution for the Earth's Land Surface Areas) applies a statistical downscaling approach to atmospheric temperature fields to produce high-resolution climate surfaces. Additional technical details on the downscaling methodology and derived climate predictors are provided in: Karger, D. N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R. W., Zimmermann, N. E., Linder, H. P., & Kessler, M. (2017). Climatologies at high resolution for the Earth's land surface areas. Scientific Data, 4, 170122. https://doi.org/10.1038/sdata.2017.122 Geographic Coverage The coverage spans North America, including Canada, Mexico, and the United States. Data Sources and Licensing Commission for Environmental Cooperation (CEC). Swiss Federal Institute for Forest, Snow and Landscape Research (WSL). Karger et al. (2017). The data is licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0), allowing redistribution and adaptation with appropriate attribution. Update frequency: Irregular Limitations of use: None. Acknowledgment of the Commission for Environmental Cooperation and the (CHELSA) initiative at the Swiss Federal Research Institute WSL (Land Change Science group) would be appreciated in products derived from these data. Vintage: 1981-2010 Applications (Intended Use) Analyzing spatial and seasonal patterns of monthly temperature across North America. Supporting climate, hydrological, and water-resource research and planning. Informing agricultural and ecological modeling and land-use planning. Integration with other thematic layers in the North American Environmental Atlas for continental-scale analysis. Supporting environmental cooperation and policy-making among Canada, Mexico, and the United States. Files Download
Overview This layer, prepared by the Commission for Environmental Cooperation (CEC), shows the total precipitation recorded during the wettest month across North America for the 1981–2010 climatological reference period, in millimeters. The dataset is derived from the CHELSA v2.1 bioclimatic variables dataset (BIO13) by identifying, for each pixel, the maximum monthly precipitation value within the twelve monthly precipitation layers. The North American climate data were derived from the CHELSA v2.1 bioclimatic variables dataset, which is produced using a mechanistic, terrain-informed climate downscaling framework that generates high-resolution gridded temperature, precipitation, and related climate variables. Additional technical details on the downscaling methods and derived climate predictors are provided in: Brun, P., Zimmermann, N. E., Hari, C., Pellissier, L., & Karger, D. N. (2022). Global climate-related predictors at kilometer resolution for the past and future. Earth System Science Data, 14(12), 5573–5603. https://doi.org/10.5194/essd-14-5573-2022 Geographic Coverage The coverage spans North America, including Canada, Mexico, and the United States. Data Sources and Licensing Commission for Environmental Cooperation (CEC). Swiss Federal Institute for Forest, Snow and Landscape Research (WSL). Brun et al. (2022). The data is licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0), allowing redistribution and adaptation with appropriate attribution. Update frequency: Irregular Limitations of use: None. Acknowledgment of the Commission for Environmental Cooperation and the (CHELSA) initiative at the Swiss Federal Research Institute WSL (Land Change Science group) would be appreciated in products derived from these data. Vintage: 1981-2010 Applications (Intended Use) Analyzing spatial patterns of peak monthly precipitation extremes across North America. Supporting flood risk assessment, water-resource, and infrastructure planning. Informing ecological and climate impact modeling. Integration with other thematic layers in the North American Environmental Atlas for continental-scale analysis. Supporting environmental cooperation and policy-making among Canada, Mexico, and the United States. Files Download
Retirement Notice: This item is in mature support as of February 2026 and will retire in December 2027. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer shows children by nativity of parents by age group. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. This layer is symbolized to show the count and percentage of children who are in immigrant families (children who are foreign born or live with at least one parent who is foreign born). To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top left. Vintage: 2019-2023ACS Table(s): B05009Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.gov The United States Census Bureau's American Community Survey (ACS):About the Survey Geography & ACS Technical Documentation News & Updates This ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data. Data Note from the Census: Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables. Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases. Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto Rico Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey. Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page. Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate. Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution. The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate. The estimate is controlled. A statistical test for sampling variability is not appropriate. The data for this geographic area cannot be displayed because the number of sample cases is too small.