Sudan water data

Water features across the area: rivers, streams, canals, lakes, ponds, and water bodies tagged with `waterway`, `water`, or `natural=water`. Useful for flood-risk modelling, watershed analysis, and environmental basemap context. Coverage reflects where volunteer mappers have been active. Urban areas are usually well represented, remote areas may be sparse. Cross-check critical decisions with local field knowledge. - Source: OpenStreetMap, a free, collaborative world map - Tags: waterway, water, natural - Part of the country exports on HDX by HOT

The Sudan River Nile Line is a line shape file showing both the White and Blue Nile passing Sudan.

The red sea polygon shape file.

**UNOSAT code FL20220816SDN** This map illustrates satellite-detected surface waters in El Salan & El Jabalain districts, White Nile State as observed from a RCM-3 image acquired on 11 September 2022. Within the analyzed area of about 200 km², about 17 km² of lands appear to be flooded. Water extent appears to have decreased of about 13 km² since the 04 September 2022. Flood waters are observed in the vicinity of Alagaya refugee camp as of 11 September 2022. Kilo Arba refugee camp appears to be affected by floods as of 11 September 2022. This is a preliminary analysis and has not yet been validated in the field. Please send ground feedback to United Nations Satellite Centre (UNOSAT).

**UNOSAT code: FL20220816SDN** This map illustrates satellite-detected surface waters in Barbar district, River Nile State as observed from a Sentinel-2 image acquired on 20 August 2022 at 10:25 local time. Within the analyzed area of about 780 km2, about 43 km2 of lands appear to be flooded. Based on Worldpop population data and the detected surface waters in the analyzed area, about 7,800 people are potentially exposed or living close to flooded areas. This is a preliminary analysis and has not yet been validated in the field. Please send ground feedback to United Nations Satellite Centre (UNOSAT).

**UNOSAT code: FL20220816SDN** This map illustrates satellite-detected surface waters in Dongola, Algolid & Alborgag districts, Northern State as observed from a Sentinel-2 image acquired on 26 August 2022 at 10:45 local time. Within the analyzed area of about 11,900 km2, about 82 km2 of lands appear to be flooded. Based on Worldpop population data and the detected surface waters in the analyzed area, about 3,500 people are potentially exposed or living close to flooded areas. This is a preliminary analysis and has not yet been validated in the field. Please send ground feedback to United Nations Satellite Centre (UNOSAT).

**UNOSAT code: FL20240826SDN, GDACS ID: 1102854** This map illustrates satellite-detected water extent in Abu Hamad Locality, River Nile State, Sudan as observed from a Sentinel-2 satellite image acquired on 19 August 2024 at 10:06 local time (08:06 UTC). Within analysed area of about 1,800 km², a total of about 28 km² of land appears to be affected by floodwaters. Based on Worldpop population data and the flood extent, approximately 400 people are potentially exposed or living close to flooded areas. This is a preliminary analysis and has not yet been validated in the field. Please send ground feedback to the United Nations Satellite Centre (UNOSAT)

**UNOSAT code: FL20240826SDN, GDACS ID: 1102854** This map illustrates satellite-detected water extents Khartoum, White Nile, Aj Jazirah and Sennar States, Sudan as observed from a Sentinel-2 image acquired on 8 September 2024 at 08:06 UTC. Within the analysed area of about 80,000 km², a total of about 6,500 km² of land appears to be affected by floodwaters. Based on Worldpop population data and the flood extent, approximately 800,000 people are potentially exposed or living close to flooded areas. This is a preliminary analysis and has not yet been validated in the field. Please send ground feedback to the United Nations Satellite Centre (UNOSAT).

**UNOSAT code: FL20240826SDN, GDACS ID: 1102854** This map illustrates satellite-detected water extents in Kassala and River Nile States, Sudan as observed from Sentinel-2 image acquired on 3 and 5 September 2024. Within the analysed area of about 100,000 km², a total of about 2,500 km² of land appears to be affected by floodwaters. Based on Worldpop population data and the flood extent, approximately 39,000 people are potentially exposed or living close to flooded areas. This is a preliminary analysis and has not yet been validated in the field. Please send ground feedback to the United Nations Satellite Centre (UNOSAT).

**UNOSAT code: FL20241224SDN** This map illustrates the satellite-detected water extent in White Nile State, Sudan, as observed from a Sentinel-2 satellite image acquired on 1 January 2025 at 10:13 local time (08:13 UTC). Within the analyzed area of approximately 24,000 km², about 145 km² of land appears to be affected by floodwaters. Floodwater extent seems to have increased by about 5 km² compared to 27 December 2024. Based on WorldPop population data and the flood extent, approximately 63,000 people are potentially exposed or living close to the flooded areas. This is a preliminary analysis and has not yet been validated in the field. Please send ground feedback to the United Nations Satellite Centre (UNOSAT).

**UNOSAT code: FL20241224SDN** This map illustrates the satellite-detected water extent in Khartoum and White Nile States, Sudan, as observed from a Sentinel-2 satellite image acquired on 1 January 2025 at 10:13 local time (08:13 UTC). Within the analyzed area of approximately 24,000 km², about 145 km² of land appears to be affected by floodwaters. Floodwater extent seems to have increased by about 5 km² compared to 27 December 2024. Based on WorldPop population data and the flood extent, approximately 63,000 people are potentially exposed or living close to the flooded areas. This is a preliminary analysis and has not yet been validated in the field. Please send ground feedback to the United Nations Satellite Centre (UNOSAT).

Interception is the process where rainfall is captured by the leaves. Part of this captured rainfall will evaporate again. The Interception (I) data component represents the evaporation of intercepted rainfall from the vegetation canopy. The value of each pixel represents the total annual interception for that specific year. The data is provided in near real time from January 2009 to 2023. **Data publication:** 2020-01-01 **Supplemental Information:** No data value: -9999 Unit: mm Scale Factor : 0.1 Map code : L3-I-A Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. This implies that other temporal aggregations (monthly, seasonal, annual), and layers that depend on those, are updated as well. Practically this means that a final annual aggregation of the most recent full calendar year can only be produced after the end of February. Likewise, the final monthly aggregation of the most recent calendar months can only be produced 2 full months later. **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [WaPOR](mailto:wapor@fao.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** See interception (I) by dekad for further information. The annual total is obtained by taking the I in mm/day, multiplying by the number of days in a dekad, and summing the dekads of each year. **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

The Interception (I) data component (dekadal, in mm/day) represents the evaporation of intercepted rainfall from the vegetation canopy. Interception is the process where rainfall is captured by the leaves. Part of this captured rainfall will evaporate again. The value of each pixel represents the average daily evaporated interception for that specific dekad. The data is provided in near real time from January 2009 to 2023. **Data publication:** 2020-01-01 **Supplemental Information:** No data value: 255 Unit: mm Scale Factor : 0.1 Map code : L3-I-D Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [WaPOR](mailto:wapor@fao.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** Evaporation of intercepted rainfall requires energy that is not available for transpiration or evaporation. Interception is a function of the vegetation cover and precipitation. Interception is relatively high with a small amount of precipitation, with the fraction intercepted decreasing quickly as precipitation increases. The maximum interception is determined by the LAI. The following data is used for calculating interception: - Daily: incoming solar radiation and weather data (temperature, humidity and precipitation); - Dekadal: NDVI. Data component developed through collaboration with the FRAME Consortium. More information can be found at: http://www.fao.org/in-action/remote-sensing-for-water-productivity/en/ **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

The Transpiration (T) data component is the actual transpiration of the vegetation canopy. The value of each pixel represents the total annual transpiration for that specific year. The data is provided in near real time from January 2009 to 2023. **Data publication:** 2020-01-01 **Supplemental Information:** No data value: -9999 Unit: mm Scale Factor : 0.1 Map code : L3-T-A Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. This implies that other temporal aggregations (monthly, seasonal, annual), and layers that depend on those, are updated as well. Practically this means that a final annual aggregation of the most recent full calendar year can only be produced after the end of February. Likewise, the final monthly aggregation of the most recent calendar months can only be produced 2 full months later. **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [WaPOR](mailto:wapor@fao.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** See transpiration (T) by dekad for further information. The annual total is obtained by taking the T in mm/day, multiplying by the number of days in a dekad, and summing the dekads of each year. **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

The transpiration (T) data component (dekadal, in mm/day) is the actual transpiration of the vegetation canopy. The value of each pixel represents the average daily actual transpiration for that specific dekad. The data is provided in near real time from January 2009 to 2023. **Data publication:** 2020-01-01 **Supplemental Information:** No data value: 255 Unit: mm Scale Factor : 0.1 Map code : L3-T-D Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [WaPOR](mailto:wapor@fao.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** The calculation of the transpiration is based on the ETLook model described in Bastiaanssen et al. (2012). It uses the Penman-Monteith equation, adapted to remote sensing input data. The Penman-Monteith equation predicts the rate of total evaporation and transpiration using commonly measured meteorological data (solar radiation, air temperature, vapour content and wind speed). It has become the FAO standard for calculating the actual and reference evapotranspiration (see FAO Irrigation and Drainage paper 56, Allen et al. 1998). The following data is used for calculating transpiration: - Daily: incoming solar radiation and weather data (temperature, humidity, wind speed and precipitation); - Dekadal: NDVI, surface albedo and soil moisture stress; - Seasonal: Land Cover; - Static: Digital Elevation Model. Data component developed through collaboration with the FRAME Consortium. More information can be found at: http://www.fao.org/in-action/remote-sensing-for-water-productivity/en/ **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

The Evaporation (E) data component is the actual evaporation of the soil surface. The value of each pixel represents the total annual evaporation for that specific year. The data is provided in near real time from January 2009 to 2023. **Data publication:** 2020-01-01 **Supplemental Information:** No data value: -9999 Unit: mm Scale Factor : 0.1 Map code : L3-E-A Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. This implies that other temporal aggregations (monthly, seasonal, annual), and layers that depend on those, are updated as well. Practically this means that a final annual aggregation of the most recent full calendar year can only be produced after the end of February. Likewise, the final monthly aggregation of the most recent calendar months can only be produced 2 full months later. **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [WaPOR](mailto:wapor@fao.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** See evaporation (E) by dekad for further information. The annual total is obtained by taking the E in mm/day, multiplying by the number of days in a dekad, and summing the dekads of each year. **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

The Evaporation (E) data component (dekadal, in mm/day) is the actual evaporation of the soil surface. The value of each pixel represents the average daily actual evaporation for that specific dekad. The data is provided in near real time from January 2009 to 2023. **Data publication:** 2020-01-01 **Supplemental Information:** No data value: 255 Unit: mm Scale Factor : 0.1 Map code : L3-E-D Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [WaPOR](mailto:wapor@fao.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** The calculation of the evaporation is based on the ETLook model described in Bastiaanssen et al. (2012). It uses the Penman-Monteith equation, adapted to remote sensing input data. The Penman-Monteith equation predicts the rate of total evaporation and transpiration using commonly measured meteorological data (solar radiation, air temperature, vapour content and wind speed). It has become the FAO standard for calculating the actual and reference evapotranspiration (see FAO Irrigation and Drainage paper 56, Allen et al. 1998). The following data is used for calculating evaporation: - Daily: incoming solar radiation and weather data (temperature, humidity, wind speed and precipitation); - Dekadal: NDVI, surface albedo and soil moisture stress; - Seasonal: Land Cover; - Static: Digital Elevation Model. Data component developed through collaboration with the FRAME Consortium. More information can be found at: http://www.fao.org/in-action/remote-sensing-for-water-productivity/en/ **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

The actual Evapotranspiration and Interception (ETIa) is the sum of the soil evaporation (E), canopy transpiration (T), and evaporation from rainfall intercepted by leaves (I). The value of each pixel represents the ETIa in a given year. The data is provided in near real time from January 2009 to 2023. **Data publication:** 2020-01-01 **Supplemental Information:** No data value: -9999 Unit: mm Scale Factor : 0.1 Map code : L3-AETI-A Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. This implies that other temporal aggregations (monthly, seasonal, annual), and layers that depend on those, are updated as well. Practically this means that a final annual aggregation of the most recent full calendar year can only be produced after the end of February. Likewise, the final monthly aggregation of the most recent calendar months can only be produced 2 full months later. **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. License: CC-BY-4.0 **Contact points:** Metadata Contact: [WaPOR](mailto:wapor@fao.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** See ETIa by dekad for further information. The annual total is obtained by taking the ETIa in mm/day, multiplying by the number of days in a dekad, and summing the dekads of each year. **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

The actual Evapotranspiration and Interception (ETIa) is the sum of the soil evaporation (E), canopy transpiration (T), and evaporation from rainfall intercepted by leaves (I). The value of each pixel represents the ETIa in a given month. The data is provided in near real time from January 2009 to 2023. **Data publication:** 2020-01-01 **Supplemental Information:** No data value: -9999 Unit: mm Scale Factor : 0.1 Map code : L3-AETI-M Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. This implies that other temporal aggregations (monthly, seasonal, annual), and layers that depend on those, are updated as well. Practically this means that a final annual aggregation of the most recent full calendar year can only be produced after the end of February. Likewise, the final monthly aggregation of the most recent calendar months can only be produced 2 full months later. **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [WaPOR](mailto:wapor@fao.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** See ETIa by dekad for further information. The monthly total is obtained by taking the ETIa in mm/day, multiplying by the number of days in a dekad, and summing the dekads of each month. **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage

The actual Evapotranspiration and Interception (ETIa) is the sum of the soil evaporation (E), canopy transpiration (T), and evaporation from rainfall intercepted by leaves (I). The value of each pixel represents the average daily ETIa in a given dekad. The data is provided in near real time from January 2009 to 2023. **Data publication:** 2020-01-01 **Supplemental Information:** No data value: -9999 Unit: mm Scale Factor : 0.1 Map code : L3-AETI-D Conversion factor: the pixel value in the downloaded data must be multiplied by 0.1 New dekadal data layers are released approximately 5 days after the end of a dekad. A higher quality version of the same data layer is uploaded after 6 dekads have passed. This final version of the dekadal dataset has a higher quality because gap filling and interpolation processes, where needed, have been based on more data observations. **Citation:** FAO 2018. WaPOR Database Methodology: Level 3. Remote Sensing for Water Productivity Technical Report: Methodology Series. Rome, FAO. 72 pages. Licence: CC-BY-4.0 **Contact points:** Metadata Contact: [WaPOR](mailto:wapor@fao.org) Resource Contact: [WaPOR](mailto:wapor@fao.org) **Data lineage:** The calculation of the ETIa is based on the ETLook model described in Bastiaanssen et al. (2012). See the methodology of the three components (E, T and I) for further information. **Resource constraints:** Creative Commons Attribution 4.0 International (CC-BY-4.0) **Online resources:** Download the data from Google Cloud Storage